From: "Maxim Yu. Osipov" <mosipov@ilbers.de>
To: Cedric Hombourger <Cedric_Hombourger@mentor.com>,
isar-users@googlegroups.com
Subject: Re: [PATCH v3 1/3] dpkg: move installation of dependencies into dpkg_prepare
Date: Tue, 28 Aug 2018 15:12:33 +0300 [thread overview]
Message-ID: <00981bab-987b-0404-c940-535eda79063c@ilbers.de> (raw)
In-Reply-To: <1535264488-128-1-git-send-email-Cedric_Hombourger@mentor.com>
On 08/26/2018 09:21 AM, Cedric Hombourger wrote:
> In preparation for a rework of locking mechanisms around apt
> operations (installation of packages or inclusion of new
> packages into the isar-apt database), move the code for
> installing build dependencies out of dpkg_runbuild and into
> a new function: dpkg_prepare.
v3 series was applied to the 'next'.
Thanks,
Maxim.
> Signed-off-by: Cedric Hombourger <Cedric_Hombourger@mentor.com>
> ---
> doc/technical_overview.md | 29 ++++++++++----
> meta/classes/dpkg-base.bbclass | 30 +++++++++++---
> meta/classes/dpkg-raw.bbclass | 15 ++++---
> meta/classes/dpkg.bbclass | 8 +++-
> meta/recipes-devtools/buildchroot/buildchroot.inc | 9 ++++-
> meta/recipes-devtools/buildchroot/files/build.sh | 48 +----------------------
> meta/recipes-devtools/buildchroot/files/common.sh | 28 +++++++++++++
> meta/recipes-devtools/buildchroot/files/deps.sh | 32 +++++++++++++++
> meta/recipes-kernel/linux-module/module.inc | 2 +-
> 9 files changed, 128 insertions(+), 73 deletions(-)
> create mode 100644 meta/recipes-devtools/buildchroot/files/common.sh
> create mode 100644 meta/recipes-devtools/buildchroot/files/deps.sh
>
> diff --git a/doc/technical_overview.md b/doc/technical_overview.md
> index ddd2c79..4f6d954 100644
> --- a/doc/technical_overview.md
> +++ b/doc/technical_overview.md
> @@ -217,24 +217,37 @@ Both consist of the following steps:
> 3. Task `do_install` _only_ for `dpkg-raw`: copy all you want in your
> debian package to `${D}`, install hooks in `${D}/DEBIAN`
>
> -4. Task `do_build`: mount folder with unpacked files to buildchroot, execute
> - the actual build function `dpkg_runbuild`, and finally umount again
> +4. Task `do_prepare': perform any preparation steps to the unpacked/patched
> + sources before the build. This task calls the dpkg_prepare shell function
> + with the buildchroot mounts in place (`dpkg_do_mounts')
>
> - 4.1. the `dpkg_runbuild` function of `dpkg.bbclass` runs `build.sh` in the
> - buildchroot. That performs the following:
> + 4.1. the `dpkg_prepare` function of `dpkg.bbclass` runs `/isar/deps.sh` in
> + the buildchroot. That performs the following:
>
> 1. Go to `/home/build/${PN}`
>
> 2. Get list of dependencies from debian/control and install them
>
> - 3. Run dpkg-buildpackage
> + 4.2. the `dpkg_prepare` function of `dpkg-raw.bbclass` translate the
> + recipe meta-data into a debian/control file suitable for packaging
> + with dpkg-deb
> +
> +5. Task `do_build`: mount folder (`dpkg_do_mounts') with unpacked files to buildchroot,
> + execute the actual build function `dpkg_runbuild`, and finally umount again
> + (`dpkg_undo_mounts')
> +
> + 5.1. the `dpkg_runbuild` function of `dpkg.bbclass` runs `build.sh` in the
> + buildchroot. That performs the following:
> +
> + 1. Go to `/home/build/${PN}`
> +
> + 2. Run dpkg-buildpackage
>
> - 4.2. the `dpkg_runbuild` function of `dpkg-raw.bbclass` basically runs
> + 5.2. the `dpkg_runbuild` function of `dpkg-raw.bbclass` basically runs
> `dpkg-deb` to construct a Debian package from a folder of files,
> without compiling anything
>
> -
> -5. Task `do_deploy_deb`: install successfully built packages
> +6. Task `do_deploy_deb`: install successfully built packages
> `${WORKDIR}/*.deb` to deploy directory `${DEPLOY_DIR_DEB}`
>
> ## 3.6 Populate Target Filesystem
> diff --git a/meta/classes/dpkg-base.bbclass b/meta/classes/dpkg-base.bbclass
> index a41df2c..5826357 100644
> --- a/meta/classes/dpkg-base.bbclass
> +++ b/meta/classes/dpkg-base.bbclass
> @@ -13,7 +13,7 @@ python __anonymous() {
> dep = "buildchroot-host:do_build"
> rootfs = d.getVar('BUILDCHROOT_HOST_DIR', True)
>
> - d.setVarFlag('do_build', 'depends', dep)
> + d.setVarFlag('do_prepare', 'depends', dep)
> d.setVar('BUILDCHROOT_DIR', rootfs)
> }
>
> @@ -32,7 +32,7 @@ addtask patch after do_adjust_git before do_build
>
> # Add dependency between Isar recipes
> DEPENDS ?= ""
> -do_build[deptask] = "do_deploy_deb"
> +do_prepare[deptask] = "do_deploy_deb"
>
> def get_package_srcdir(d):
> s = d.getVar("S", True)
> @@ -50,7 +50,10 @@ PPS ?= "${@get_package_srcdir(d)}"
> BUILDROOT = "${BUILDCHROOT_DIR}/${PP}"
> do_build[stamp-extra-info] = "${DISTRO}-${DISTRO_ARCH}"
>
> -# default to "emtpy" implementation
> +# default to "emtpy" implementation for dpkg_prepare() and dpkg_runbuild()
> +dpkg_prepare() {
> + true
> +}
> dpkg_runbuild() {
> die "This should never be called, overwrite it in your derived class"
> }
> @@ -58,7 +61,7 @@ dpkg_runbuild() {
> MOUNT_LOCKFILE = "${BUILDCHROOT_DIR}/mount.lock"
>
> # Wrap the function dpkg_runbuild with the bind mount for buildroot
> -do_build() {
> +dpkg_do_mounts() {
> mkdir -p ${BUILDROOT}
> sudo mount --bind ${WORKDIR} ${BUILDROOT}
>
> @@ -70,13 +73,28 @@ do_build() {
> mount -t devtmpfs -o mode=0755,nosuid devtmpfs ${BUILDCHROOT_DIR}/dev
> mount -t proc none ${BUILDCHROOT_DIR}/proc
> fi'
> +}
>
> - dpkg_runbuild
> -
> +dpkg_undo_mounts() {
> sudo umount ${BUILDROOT} 2>/dev/null || true
> sudo rmdir ${BUILDROOT} 2>/dev/null || true
> }
>
> +do_prepare() {
> + dpkg_do_mounts
> + dpkg_prepare
> + dpkg_undo_mounts
> +}
> +
> +addtask prepare after do_patch before do_build
> +do_prepare[stamp-extra-info] = "${DISTRO}-${DISTRO_ARCH}"
> +
> +do_build() {
> + dpkg_do_mounts
> + dpkg_runbuild
> + dpkg_undo_mounts
> +}
> +
> CLEANFUNCS += "repo_clean"
>
> repo_clean() {
> diff --git a/meta/classes/dpkg-raw.bbclass b/meta/classes/dpkg-raw.bbclass
> index 28233ac..c5f1c88 100644
> --- a/meta/classes/dpkg-raw.bbclass
> +++ b/meta/classes/dpkg-raw.bbclass
> @@ -14,9 +14,9 @@ do_install() {
> }
>
> do_install[stamp-extra-info] = "${DISTRO}-${DISTRO_ARCH}"
> -addtask install after do_unpack before do_deb_package_prepare
> +addtask install after do_unpack before do_prepare
>
> -do_deb_package_prepare() {
> +deb_package_prepare() {
> sudo rm -rf ${D}/DEBIAN
> mkdir -p ${D}/DEBIAN
> cat<<-__EOF__ > ${D}/DEBIAN/control
> @@ -42,17 +42,16 @@ do_deb_package_prepare() {
> done
> }
>
> -do_deb_package_prepare[stamp-extra-info] = "${DISTRO}-${DISTRO_ARCH}"
> -addtask deb_package_prepare after do_install before do_deb_package_conffiles
> -
> -do_deb_package_conffiles() {
> +deb_package_conffiles() {
> CONFFILES=${D}/DEBIAN/conffiles
> find ${D} -type f -path '${D}/etc/*' | sed -e 's|^${D}|/|' >> $CONFFILES
> test -s $CONFFILES || rm $CONFFILES
> }
>
> -do_deb_package_conffiles[stamp-extra-info] = "${DISTRO}-${DISTRO_ARCH}"
> -addtask deb_package_conffiles after do_deb_package_prepare before do_build
> +dpkg_prepare() {
> + deb_package_prepare
> + deb_package_conffiles
> +}
>
> dpkg_runbuild() {
> sudo chown -R root:root ${D}/DEBIAN/
> diff --git a/meta/classes/dpkg.bbclass b/meta/classes/dpkg.bbclass
> index ab70645..e8bd6ba 100644
> --- a/meta/classes/dpkg.bbclass
> +++ b/meta/classes/dpkg.bbclass
> @@ -3,8 +3,14 @@
>
> inherit dpkg-base
>
> +# Install build dependencies for package
> +dpkg_prepare() {
> + E="${@ bb.utils.export_proxies(d)}"
> + sudo -E chroot ${BUILDCHROOT_DIR} /isar/deps.sh ${PP}/${PPS} ${DISTRO_ARCH}
> +}
> +
> # Build package from sources using build script
> dpkg_runbuild() {
> E="${@ bb.utils.export_proxies(d)}"
> - sudo -E chroot ${BUILDCHROOT_DIR} /build.sh ${PP}/${PPS} ${DISTRO_ARCH}
> + sudo -E chroot ${BUILDCHROOT_DIR} /isar/build.sh ${PP}/${PPS} ${DISTRO_ARCH}
> }
> diff --git a/meta/recipes-devtools/buildchroot/buildchroot.inc b/meta/recipes-devtools/buildchroot/buildchroot.inc
> index 43e3cd6..7dd909e 100644
> --- a/meta/recipes-devtools/buildchroot/buildchroot.inc
> +++ b/meta/recipes-devtools/buildchroot/buildchroot.inc
> @@ -8,7 +8,9 @@ LIC_FILES_CHKSUM = "file://${LAYERDIR_isar}/licenses/COPYING.GPLv2;md5=751419260
>
> FILESPATH_prepend := "${THISDIR}/files:"
> SRC_URI = "file://configscript.sh \
> - file://build.sh"
> + file://build.sh \
> + file://common.sh \
> + file://deps.sh"
> PV = "1.0"
>
> inherit isar-bootstrap-helper
> @@ -27,7 +29,10 @@ do_build() {
>
> # Install package builder script
> sudo chmod -R a+rw "${BUILDCHROOT_DIR}/home/builder"
> - sudo install -m 755 ${WORKDIR}/build.sh ${BUILDCHROOT_DIR}
> + sudo install -m 755 -d ${BUILDCHROOT_DIR}/isar
> + sudo install -m 755 ${WORKDIR}/build.sh ${BUILDCHROOT_DIR}/isar/
> + sudo install -m 755 ${WORKDIR}/common.sh ${BUILDCHROOT_DIR}/isar/
> + sudo install -m 755 ${WORKDIR}/deps.sh ${BUILDCHROOT_DIR}/isar/
>
> # Configure root filesystem
> sudo install -m 755 ${WORKDIR}/configscript.sh ${BUILDCHROOT_DIR}
> diff --git a/meta/recipes-devtools/buildchroot/files/build.sh b/meta/recipes-devtools/buildchroot/files/build.sh
> index e2dabab..3c80bd7 100644
> --- a/meta/recipes-devtools/buildchroot/files/build.sh
> +++ b/meta/recipes-devtools/buildchroot/files/build.sh
> @@ -4,53 +4,7 @@
> # Copyright (C) 2015-2017 ilbers GmbH
> # Copyright (c) 2018 Siemens AG
>
> -set -e
> -
> -# Create human-readable names
> -target_arch=$2
> -
> -# Notes:
> -# mk-build-deps for jessie and jtretch has different parameter name to specify
> -# host architecture.
> -debian_version=$(cut -c1 /etc/debian_version)
> -if [ $(($debian_version)) -ge 9 ]; then
> - set_arch="--host-arch $target_arch"
> -else
> - set_arch="-a $target_arch"
> -fi
> -
> -# Go to build directory
> -cd $1
> -
> -# To avoid Perl locale warnings:
> -export LC_ALL=C
> -export LANG=C
> -export LANGUAGE=C
> -
> -# Install command to be used by mk-build-deps
> -# Notes:
> -# 1) everything before the -y switch is unchanged from the defaults
> -# 2) we add -y to go non-interactive
> -install_cmd="apt-get -o Debug::pkgProblemResolver=yes --no-install-recommends -y"
> -
> -(
> - # Lock-protected because apt and dpkg do not wait in case of contention
> - flock 42 || exit 1
> -
> - # Make sure that we have latest isar-apt content.
> - # Options meaning:
> - # Dir::Etc::sourcelist - specifies which source to be used
> - # Dir::Etc::sourceparts - disables looking for the other sources
> - # APT::Get::List-Cleanup - do not erase obsolete packages list for
> - # upstream in '/var/lib/apt/lists'
> - apt-get update \
> - -o Dir::Etc::sourcelist="sources.list.d/isar-apt.list" \
> - -o Dir::Etc::sourceparts="-" \
> - -o APT::Get::List-Cleanup="0"
> -
> - # Install all build deps
> - mk-build-deps $set_arch -t "${install_cmd}" -i -r debian/control
> -) 42>/dpkg.lock
> +source /isar/common.sh
>
> # If autotools files have been created, update their timestamp to
> # prevent them from being regenerated
> diff --git a/meta/recipes-devtools/buildchroot/files/common.sh b/meta/recipes-devtools/buildchroot/files/common.sh
> new file mode 100644
> index 0000000..b7551eb
> --- /dev/null
> +++ b/meta/recipes-devtools/buildchroot/files/common.sh
> @@ -0,0 +1,28 @@
> +#!/bin/bash
> +#
> +# This software is a part of ISAR.
> +# Copyright (C) 2015-2017 ilbers GmbH
> +# Copyright (c) 2018 Siemens AG
> +
> +set -e
> +
> +# Create human-readable names
> +target_arch=$2
> +
> +# Notes:
> +# mk-build-deps for jessie and jtretch has different parameter name to specify
> +# host architecture.
> +debian_version=$(cut -c1 /etc/debian_version)
> +if [ $(($debian_version)) -ge 9 ]; then
> + set_arch="--host-arch $target_arch"
> +else
> + set_arch="-a $target_arch"
> +fi
> +
> +# Go to build directory
> +cd $1
> +
> +# To avoid Perl locale warnings:
> +export LC_ALL=C
> +export LANG=C
> +export LANGUAGE=C
> diff --git a/meta/recipes-devtools/buildchroot/files/deps.sh b/meta/recipes-devtools/buildchroot/files/deps.sh
> new file mode 100644
> index 0000000..854a4d5
> --- /dev/null
> +++ b/meta/recipes-devtools/buildchroot/files/deps.sh
> @@ -0,0 +1,32 @@
> +#!/bin/bash
> +#
> +# This software is a part of ISAR.
> +# Copyright (C) 2015-2017 ilbers GmbH
> +# Copyright (c) 2018 Siemens AG
> +
> +source /isar/common.sh
> +
> +# Install command to be used by mk-build-deps
> +# Notes:
> +# 1) everything before the -y switch is unchanged from the defaults
> +# 2) we add -y to go non-interactive
> +install_cmd="apt-get -o Debug::pkgProblemResolver=yes --no-install-recommends -y"
> +
> +(
> + # Lock-protected because apt and dpkg do not wait in case of contention
> + flock 42 || exit 1
> +
> + # Make sure that we have latest isar-apt content.
> + # Options meaning:
> + # Dir::Etc::sourcelist - specifies which source to be used
> + # Dir::Etc::sourceparts - disables looking for the other sources
> + # APT::Get::List-Cleanup - do not erase obsolete packages list for
> + # upstream in '/var/lib/apt/lists'
> + apt-get update \
> + -o Dir::Etc::sourcelist="sources.list.d/isar-apt.list" \
> + -o Dir::Etc::sourceparts="-" \
> + -o APT::Get::List-Cleanup="0"
> +
> + # Install all build deps
> + mk-build-deps $set_arch -t "${install_cmd}" -i -r debian/control
> +) 42>/dpkg.lock
> diff --git a/meta/recipes-kernel/linux-module/module.inc b/meta/recipes-kernel/linux-module/module.inc
> index 3075f44..3a3cab1 100644
> --- a/meta/recipes-kernel/linux-module/module.inc
> +++ b/meta/recipes-kernel/linux-module/module.inc
> @@ -17,7 +17,7 @@ AUTOLOAD ?= "0"
>
> inherit dpkg
>
> -dpkg_runbuild_prepend() {
> +do_prepare_prepend() {
> cp -r ${WORKDIR}/debian ${S}/
> sed -i -e 's/@PN@/${PN}/g' -e 's/@PV@/${PV}/g' \
> -e 's/@KERNEL_NAME@/${KERNEL_NAME}/g' \
>
--
Maxim Osipov
ilbers GmbH
Maria-Merian-Str. 8
85521 Ottobrunn
Germany
+49 (151) 6517 6917
mosipov@ilbers.de
http://ilbers.de/
Commercial register Munich, HRB 214197
General Manager: Baurzhan Ismagulov
next prev parent reply other threads:[~2018-08-28 12:12 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-22 11:34 [PATCH 0/1] acquire database lock when calling reprepro Cedric Hombourger
2018-08-22 11:34 ` [PATCH 1/1] dpkg: acquire " Cedric Hombourger
2018-08-22 12:20 ` Jan Kiszka
2018-08-22 12:48 ` Hombourger, Cedric
2018-08-22 13:41 ` Henning Schild
2018-08-22 13:47 ` Hombourger, Cedric
2018-08-22 13:48 ` Jan Kiszka
2018-08-26 6:21 ` [PATCH v3 1/3] dpkg: move installation of dependencies into dpkg_prepare Cedric Hombourger
2018-08-26 6:21 ` [PATCH v3 2/3] linux: leverage dpkg_prepare to install build dependencies Cedric Hombourger
2018-08-26 6:21 ` [PATCH v3 3/3] dpkg+linux: use Isar's lock via do_prepare[lockfiles] instead of flock Cedric Hombourger
2018-08-28 12:12 ` Maxim Yu. Osipov [this message]
2018-08-31 8:10 ` [PATCH v3 1/3] dpkg: move installation of dependencies into dpkg_prepare Jan Kiszka
2018-08-31 8:15 ` chombourger
2018-08-31 8:21 ` Jan Kiszka
2018-08-31 8:28 ` Jan Kiszka
2018-08-31 8:33 ` chombourger
2018-08-31 8:41 ` Jan Kiszka
2018-08-31 9:05 ` Jan Kiszka
2018-09-01 6:58 ` Jan Kiszka
2018-09-01 8:44 ` Cedric Hombourger
2018-09-01 9:31 ` Jan Kiszka
2018-08-22 11:58 ` [PATCH 0/1] acquire database lock when calling reprepro Alexander Smirnov
2018-08-22 12:07 ` Hombourger, Cedric
2018-08-22 12:47 ` [PATCH v2] dpkg: acquire " Cedric Hombourger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=00981bab-987b-0404-c940-535eda79063c@ilbers.de \
--to=mosipov@ilbers.de \
--cc=Cedric_Hombourger@mentor.com \
--cc=isar-users@googlegroups.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox