From: "Schaffner, Tobias" <tobias.schaffner@siemens.com>
To: "MOESSBAUER, FELIX JONATHAN" <felix.moessbauer@siemens.com>,
"isar-users@googlegroups.com" <isar-users@googlegroups.com>
Cc: "Kiszka, Jan" <jan.kiszka@siemens.com>,
"daniel.bovensiepen@siemens.com" <daniel.bovensiepen@siemens.com>,
"Bezdeka, Florian" <florian.bezdeka@siemens.com>,
"jay.zhou@starfivetech.com" <jay.zhou@starfivetech.com>
Subject: Re: [PATCH v2 0/7] Add BSP for StarFiveTech VisionFive2 Risc-V board
Date: Tue, 14 Mar 2023 15:31:07 +0000 [thread overview]
Message-ID: <1c25e28a-d70b-4a39-12ac-09b118cdd66a@siemens.com> (raw)
In-Reply-To: <20230211092152.949442-1-felix.moessbauer@siemens.com>
On 11.02.23 10:21, Felix Moessbauer wrote:
> Changes since v1:
>
> - rebased onto next (including bitbake 2.0 migration)
> - exclude opensbi memory range in u-boot DT
> - use upstream OpenSBI version (instead of StarFive version)
>
> This series adds a new machine "starfive-visionfive2" which is a
> Risc-V board based on the JH7110 SoC. The BSP is modeled based on the
> buildroot SDK [1], but without any proprietary imaging components.
>
> Further, we implement the fit + efi boot toolchain, instead of the
> proposed ubootenv + fit version. This also requires that we embed the
> board's linux device tree into the fit, as memory and reserved-memory
> nodes are resolved via the efi API (implemented by u-boot) instead of
> resolving them via the DT in Linux.
>
> As the JH7110 SoC has no usable upstream support yet, we directly
> build the 5.15 based kernel from the SDK, instead of porting patches
> on top of the standard Linux. Distro kernels are also not supported.
>
> Note: This series requires the following patch, which is NOT included:
> "fix cyclic dep on crossbuild-essential-riscv64"
>
> Best regards,
> Felix Moessbauer
> Siemens AG
I tested this series today. The isar-image-base target build and booted
just fine.
Best,
Tobias
> Felix Moessbauer (7):
> u-boot: inject debian multi-arch config
> starfive-visionfive2: package u-boot
> starfive-visionfive2: package opensbi firmware
> starfive-visionfive2: add BSP kernel
> starfive-visionfive2: create u-boot-spl firmware
> starfive-visionfive2: create u-boot-spl FIT image
> starfive-visionfive2: add machine
>
> meta-isar/conf/local.conf.sample | 1 +
> .../conf/machine/starfive-visionfive2.conf | 29 ++++++
> .../starfive-visionfive2-sid-ports.conf | 7 ++
> .../jh7110-u-boot-spl-image/files/install | 1 +
> .../jh7110-u-boot-spl-image/files/rules | 13 +++
> .../jh7110-u-boot-spl-image_0.1.bb | 30 +++++++
> .../jh7110-u-boot-spl-tool_0.1.bb | 23 +++++
> .../files/starfive-visionfive2-rules.tmpl | 17 ++++
> ...ensbi-starfive-visionfive2_1.2+20230107.bb | 31 +++++++
> ...x-offset-of-env-data-block-on-jh7110.patch | 30 +++++++
> ...iscv-Fix-build-against-binutils-2.38.patch | 55 ++++++++++++
> ...-opensbi-memory-range-in-device-tree.patch | 40 +++++++++
> ...upport-building-double-float-modules.patch | 89 +++++++++++++++++++
> ...five-visionfive2_2022.01-rc4+VF2-v2.8.0.bb | 38 ++++++++
> .../files/rules.tmpl | 12 +++
> .../files/visionfive2-u-boot-firmware.install | 1 +
> .../visionfive2-uboot-fit-image.its.tmpl | 41 +++++++++
> .../visionfive2-u-boot-firmware.bb | 36 ++++++++
> ...or-unrecognized-opcode-csrr-a5-0xc01.patch | 26 ++++++
> .../linux/files/starfive2_extra.cfg | 3 +
> .../linux/linux-starfive_5.15-visionfive2.bb | 18 ++++
> .../canned-wks/starfive-visionfive2.wks.in | 23 +++++
> .../u-boot/files/debian/rules.tmpl | 9 ++
> 23 files changed, 573 insertions(+)
> create mode 100644 meta-isar/conf/machine/starfive-visionfive2.conf
> create mode 100644 meta-isar/conf/multiconfig/starfive-visionfive2-sid-ports.conf
> create mode 100644 meta-isar/recipes-bsp/jh7110-u-boot-spl-image/files/install
> create mode 100644 meta-isar/recipes-bsp/jh7110-u-boot-spl-image/files/rules
> create mode 100644 meta-isar/recipes-bsp/jh7110-u-boot-spl-image/jh7110-u-boot-spl-image_0.1.bb
> create mode 100644 meta-isar/recipes-bsp/jh7110-u-boot-spl-tool/jh7110-u-boot-spl-tool_0.1.bb
> create mode 100644 meta-isar/recipes-bsp/opensbi/files/starfive-visionfive2-rules.tmpl
> create mode 100644 meta-isar/recipes-bsp/opensbi/opensbi-starfive-visionfive2_1.2+20230107.bb
> create mode 100644 meta-isar/recipes-bsp/u-boot/files/starfive-visionfive2/0001-fix-offset-of-env-data-block-on-jh7110.patch
> create mode 100644 meta-isar/recipes-bsp/u-boot/files/starfive-visionfive2/0001-riscv-Fix-build-against-binutils-2.38.patch
> create mode 100644 meta-isar/recipes-bsp/u-boot/files/starfive-visionfive2/0002-exclude-opensbi-memory-range-in-device-tree.patch
> create mode 100644 meta-isar/recipes-bsp/u-boot/files/starfive-visionfive2/0002-riscv-support-building-double-float-modules.patch
> create mode 100644 meta-isar/recipes-bsp/u-boot/u-boot-starfive-visionfive2_2022.01-rc4+VF2-v2.8.0.bb
> create mode 100644 meta-isar/recipes-bsp/visionfive2-u-boot-firmware/files/rules.tmpl
> create mode 100644 meta-isar/recipes-bsp/visionfive2-u-boot-firmware/files/visionfive2-u-boot-firmware.install
> create mode 100644 meta-isar/recipes-bsp/visionfive2-u-boot-firmware/files/visionfive2-uboot-fit-image.its.tmpl
> create mode 100644 meta-isar/recipes-bsp/visionfive2-u-boot-firmware/visionfive2-u-boot-firmware.bb
> create mode 100644 meta-isar/recipes-kernel/linux/files/fix-Error-unrecognized-opcode-csrr-a5-0xc01.patch
> create mode 100644 meta-isar/recipes-kernel/linux/files/starfive2_extra.cfg
> create mode 100644 meta-isar/recipes-kernel/linux/linux-starfive_5.15-visionfive2.bb
> create mode 100644 meta-isar/scripts/lib/wic/canned-wks/starfive-visionfive2.wks.in
>
prev parent reply other threads:[~2023-03-14 15:31 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-02-11 9:21 Felix Moessbauer
2023-02-11 9:21 ` [PATCH v2 1/7] u-boot: inject debian multi-arch config Felix Moessbauer
2023-03-16 4:49 ` Uladzimir Bely
2023-03-16 7:33 ` Jan Kiszka
2023-02-11 9:21 ` [PATCH v2 2/7] starfive-visionfive2: package u-boot Felix Moessbauer
2023-02-11 9:21 ` [PATCH v2 3/7] starfive-visionfive2: package opensbi firmware Felix Moessbauer
2023-02-13 6:39 ` Moessbauer, Felix
2023-02-11 9:21 ` [PATCH v2 4/7] starfive-visionfive2: add BSP kernel Felix Moessbauer
2023-02-11 9:21 ` [PATCH v2 5/7] starfive-visionfive2: create u-boot-spl firmware Felix Moessbauer
2023-02-11 9:21 ` [PATCH v2 6/7] starfive-visionfive2: create u-boot-spl FIT image Felix Moessbauer
2023-02-11 9:21 ` [PATCH v2 7/7] starfive-visionfive2: add machine Felix Moessbauer
2023-03-14 15:31 ` Schaffner, Tobias [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1c25e28a-d70b-4a39-12ac-09b118cdd66a@siemens.com \
--to=tobias.schaffner@siemens.com \
--cc=daniel.bovensiepen@siemens.com \
--cc=felix.moessbauer@siemens.com \
--cc=florian.bezdeka@siemens.com \
--cc=isar-users@googlegroups.com \
--cc=jan.kiszka@siemens.com \
--cc=jay.zhou@starfivetech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox