* [Discussion] Deprecating Raspberry Pi
@ 2019-02-11 12:41 Claudius Heine
2019-02-11 12:48 ` Jan Kiszka
` (3 more replies)
0 siblings, 4 replies; 17+ messages in thread
From: Claudius Heine @ 2019-02-11 12:41 UTC (permalink / raw)
To: isar-users
Hi,
is anybody currently using Isar to build for Raspberry Pi?
If that target is not maintained and used, then I would be in favor of
removing it from meta-isar.
I just tried to boot the 'isar-image-base.rpi-sdimg' image of the
current next branch (d88c739323ecdecc) on a Raspberry Pi 1 without success.
Currently RPi support with jessie is holding us back to deprecate jessie
and removing the loop mounts that is required by the old versions of
mkfs.ext4. So I would be in favor of eigher removing RPi1 support or
switching to stretch with that, if there are maintainers that regularly
test if booting works.
regards,
Claudius
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-54 Fax: (+49)-8142-66989-80 Email: ch@denx.de
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Discussion] Deprecating Raspberry Pi
2019-02-11 12:41 [Discussion] Deprecating Raspberry Pi Claudius Heine
@ 2019-02-11 12:48 ` Jan Kiszka
2019-02-11 13:30 ` Claudius Heine
2019-02-11 13:51 ` [PATCH] remove raspberry support claudius.heine.ext
` (2 subsequent siblings)
3 siblings, 1 reply; 17+ messages in thread
From: Jan Kiszka @ 2019-02-11 12:48 UTC (permalink / raw)
To: [ext] Claudius Heine, isar-users
On 11.02.19 13:41, [ext] Claudius Heine wrote:
> Hi,
>
> is anybody currently using Isar to build for Raspberry Pi?
>
Likely not on Raspbian, I would guess. We do have a pending request to enable
the RPi3 with Isar, but that is a different topic.
> If that target is not maintained and used, then I would be in favor of removing
> it from meta-isar.
>
> I just tried to boot the 'isar-image-base.rpi-sdimg' image of the current next
> branch (d88c739323ecdecc) on a Raspberry Pi 1 without success.
The RPi1 is probably also an uninteresting target by now.
>
> Currently RPi support with jessie is holding us back to deprecate jessie and
> removing the loop mounts that is required by the old versions of mkfs.ext4. So I
> would be in favor of eigher removing RPi1 support or switching to stretch with
> that, if there are maintainers that regularly test if booting works.
Keeping a non-Debian target would have the value to stress our abstractions. But
that only works if the target is recent enough (Stretch or newer), frequently
built and run as well.
Jan
--
Siemens AG, Corporate Technology, CT RDA IOT SES-DE
Corporate Competence Center Embedded Linux
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Discussion] Deprecating Raspberry Pi
2019-02-11 12:48 ` Jan Kiszka
@ 2019-02-11 13:30 ` Claudius Heine
0 siblings, 0 replies; 17+ messages in thread
From: Claudius Heine @ 2019-02-11 13:30 UTC (permalink / raw)
To: Jan Kiszka, isar-users
Hi Jan,
On 11/02/2019 13.48, Jan Kiszka wrote:
[...]
>> If that target is not maintained and used, then I would be in favor of
>> removing it from meta-isar.
>>
>> I just tried to boot the 'isar-image-base.rpi-sdimg' image of the
>> current next branch (d88c739323ecdecc) on a Raspberry Pi 1 without
>> success.
>
> The RPi1 is probably also an uninteresting target by now.
I agree.
>
>>
>> Currently RPi support with jessie is holding us back to deprecate
>> jessie and removing the loop mounts that is required by the old
>> versions of mkfs.ext4. So I would be in favor of eigher removing RPi1
>> support or switching to stretch with that, if there are maintainers
>> that regularly test if booting works.
>
> Keeping a non-Debian target would have the value to stress our
> abstractions. But that only works if the target is recent enough
> (Stretch or newer), frequently built and run as well.
Yes. One additional point is if we have the man-power and will to
support non-Debian distributions. And If we do, we have to ask if
Raspbian is the most interesting one or if for instance Ubuntu for
RPi2+3 would be more useful for people. Maybe we could stick to just VM
targets in meta-isar, so that booting is easy to test.
regards,
Claudius
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-54 Fax: (+49)-8142-66989-80 Email: ch@denx.de
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH] remove raspberry support
2019-02-11 12:41 [Discussion] Deprecating Raspberry Pi Claudius Heine
2019-02-11 12:48 ` Jan Kiszka
@ 2019-02-11 13:51 ` claudius.heine.ext
2019-02-11 14:03 ` Jan Kiszka
2019-02-11 14:03 ` [Discussion] Deprecating Raspberry Pi Baurzhan Ismagulov
2019-02-17 10:44 ` Baurzhan Ismagulov
3 siblings, 1 reply; 17+ messages in thread
From: claudius.heine.ext @ 2019-02-11 13:51 UTC (permalink / raw)
To: isar-users; +Cc: Claudius Heine
From: Claudius Heine <ch@denx.de>
Signed-off-by: Claudius Heine <ch@denx.de>
---
README.md | 4 --
doc/user_manual.md | 30 +---------
meta-isar/classes/rpi-sdimg.bbclass | 57 -------------------
meta-isar/conf/conf-notes.txt | 1 -
.../conf/distro/raspbian-configscript.sh | 21 -------
meta-isar/conf/distro/raspbian-jessie.conf | 12 ----
meta-isar/conf/distro/raspbian-jessie.list | 2 -
meta-isar/conf/local.conf.sample | 1 -
meta-isar/conf/machine/rpi.conf | 7 ---
meta-isar/conf/multiconfig/rpi-jessie.conf | 33 -----------
meta-isar/recipes-app/hello/hello_2.9.bb | 1 -
.../example-module/example-module.bb | 2 +-
scripts/ci_build.sh | 1 -
13 files changed, 4 insertions(+), 168 deletions(-)
delete mode 100644 meta-isar/classes/rpi-sdimg.bbclass
delete mode 100644 meta-isar/conf/distro/raspbian-configscript.sh
delete mode 100644 meta-isar/conf/distro/raspbian-jessie.conf
delete mode 100644 meta-isar/conf/distro/raspbian-jessie.list
delete mode 100644 meta-isar/conf/machine/rpi.conf
delete mode 100644 meta-isar/conf/multiconfig/rpi-jessie.conf
diff --git a/README.md b/README.md
index 7094c88..1af703b 100644
--- a/README.md
+++ b/README.md
@@ -20,10 +20,6 @@ To test the QEMU image, run the following command:
The default root password is 'root'.
-To test the RPi board, flash the image to an SD card using the instructions from the official site,
-section "WRITING AN IMAGE TO THE SD CARD":
- https://www.raspberrypi.org/documentation/installation/installing-images/README.md
-
# Supported distributions
List of supported distributions, architectures and features can be found in the [Supported_Configurations](Supported_Configurations.md).
diff --git a/doc/user_manual.md b/doc/user_manual.md
index ff4939c..b73d63d 100644
--- a/doc/user_manual.md
+++ b/doc/user_manual.md
@@ -149,7 +149,6 @@ BBMULTICONFIG = " \
qemuamd64-jessie \
qemuamd64-stretch \
qemuamd64-buster \
- rpi-jessie \
bananapi-stretch \
"
```
@@ -168,7 +167,6 @@ $ bitbake \
multiconfig:qemuamd64-jessie:isar-image-base \
multiconfig:qemuamd64-stretch:isar-image-base \
multiconfig:qemuamd64-buster:isar-image-base \
- multiconfig:rpi-jessie:isar-image-base \
multiconfig:bananapi-stretch:isar-image-base
```
@@ -183,7 +181,6 @@ tmp/deploy/images/isar-image-base-debian-jessie-qemui386.ext4.img
tmp/deploy/images/isar-image-base-debian-stretch-qemui386.ext4.img
tmp/deploy/images/isar-image-base-debian-jessie-qemuamd64.ext4.img
tmp/deploy/images/isar-image-base-debian-stretch-qemuamd64.ext4.img
-tmp/deploy/images/isar-image-base.rpi-sdimg
tmp/deploy/images/isar-image-base-debian-stretch-bananapi.wic.img
```
@@ -287,10 +284,10 @@ images for.
If BitBake is called with image targets (e.g., `isar-image-base`), the
following variables define the default configuration to build for:
- - `MACHINE` - The board to build for (e.g., `qemuarm`, `rpi`). BitBake looks
+ - `MACHINE` - The board to build for (e.g., `qemuarm`, `qemuamd64`). BitBake looks
for conf/multiconfig/${MACHINE}.conf in every layer.
- - `DISTRO` - The distro to use (e.g. `raspbian-jessie`, `debian-stretch`).
+ - `DISTRO` - The distro to use (e.g. `debian-buster`, `debian-stretch`).
BitBake looks for conf/distro/${DISTRO}.conf in every layer.
- `DISTRO_ARCH` - The Debian architecture to build for (e.g., `armhf`).
@@ -324,7 +321,6 @@ In Isar, each machine can use its specific Linux distro to generate `buildchroot
- debian-jessie
- debian-stretch
- debian-buster
- - raspbian-jessie
User can select appropriate distro for specific machine by setting the following variable in machine configuration file:
```
@@ -349,7 +345,6 @@ Please refer to `Add a Custom Application` section for more information about wr
Isar can generate various images types for specific machine. The type of the image to be generated may be specified through the `IMAGE_TYPE` variable. Currently, the following image types are provided:
- `ext4` - Raw ext4 filesystem image (default option for `qemuarm` machine).
- - `rpi-sdimg` - A complete, partitioned Raspberry Pi SD card image (default option for the `rpi` machine).
- `wic-img` - A full disk image with user-specified partitions created and populated using the wic tool.
---
@@ -363,14 +358,6 @@ The distro is defined by the set of the following variables:
- `DISTRO_APT_PREFERENCES` - List of apt preference files
- `DISTRO_KERNELS` - List of supported kernel suffixes
-Below is an example for Raspbian Jessie:
-```
-DISTRO_APT_SOURCES += "conf/distro/raspbian-jessie.list"
-DISTRO_APT_KEYS += "https://archive.raspbian.org/raspbian.public.key;sha256sum=ca59cd4f2bcbc3a1d41ba6815a02a8dc5c175467a59bd87edeac458f4a5345de"
-DISTRO_CONFIG_SCRIPT?= "raspbian-configscript.sh"
-DISTRO_KERNELS ?= "rpi rpi2 rpi-rpfv rpi2-rpfv"
-```
-
To add new distro, user should perform the following steps:
- Create `distro` folder in your layer:
@@ -404,16 +391,6 @@ Every machine is described in its configuration file. The file defines the follo
- `MACHINE_SERIAL` - The name of serial device that will be used for console output.
- `IMAGE_TYPE` - The type of images to be generated for this machine.
-Below is an example of machine configuration file for `Raspberry Pi` board:
-```
-IMAGE_PREINSTALL = "linux-image-rpi-rpfv \
- raspberrypi-bootloader-nokernel"
-KERNEL_IMAGE = "vmlinuz-4.4.0-1-rpi"
-INITRD_IMAGE = "initrd.img-4.4.0-1-rpi"
-MACHINE_SERIAL = "ttyAMA0"
-IMAGE_TYPE = "rpi-sdimg"
-```
-
To add new machine user should perform the following steps:
- Create the `machine` directory in your layer:
@@ -472,10 +449,9 @@ IMAGE_TYPE = "my-image"
### Reference Classes
-Isar contains three image type classes that can be used as reference:
+Isar contains additional image type classes that can be used as reference:
- `ext4-img`
- - `rpi-sdimg`
- `wic-img`
---
diff --git a/meta-isar/classes/rpi-sdimg.bbclass b/meta-isar/classes/rpi-sdimg.bbclass
deleted file mode 100644
index 91b09cd..0000000
--- a/meta-isar/classes/rpi-sdimg.bbclass
+++ /dev/null
@@ -1,57 +0,0 @@
-# This software is a part of ISAR.
-# Copyright (C) 2015-2016 ilbers GmbH
-#
-# Based on SD class from meta-raspberrypi
-
-inherit ext4-img
-
-# Boot partition volume id
-BOOTDD_VOLUME_ID ?= "${MACHINE}"
-
-# Boot partition size [in KiB]
-BOOT_SPACE ?= "40960"
-
-# Set alignment to 4MB [in KiB]
-IMAGE_ROOTFS_ALIGNMENT = "4096"
-
-SDIMG = "${DEPLOY_DIR_IMAGE}/${PN}.rpi-sdimg"
-SDIMG_ROOTFS = "${EXT4_IMAGE_FILE}"
-
-do_rpi_sdimg () {
- # Align partitions
- ROOTFS_SIZE=$(du -b ${SDIMG_ROOTFS} | cut -f 1)
- ROOTFS_SIZE=$(expr ${ROOTFS_SIZE} + 1)
- ROOTFS_SIZE=$(expr ${ROOTFS_SIZE} - ${ROOTFS_SIZE} % 1024)
- ROOTFS_SIZE=$(expr ${ROOTFS_SIZE} / 1024)
- ROOTFS_SIZE=$(expr ${ROOTFS_SIZE} - ${ROOTFS_SIZE} % ${IMAGE_ROOTFS_ALIGNMENT} + ${IMAGE_ROOTFS_ALIGNMENT})
-
- BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
- BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
- SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + ${ROOTFS_SIZE})
-
- echo "Creating filesystem with Boot partition ${BOOT_SPACE_ALIGNED} KiB and RootFS $ROOTFS_SIZE KiB"
-
- #Initialize sdcard image file
- dd if=/dev/zero of=${SDIMG} bs=1024 count=0 seek=${SDIMG_SIZE}
-
- # Create partition table
- parted -s ${SDIMG} mklabel msdos
- # Create boot partition and mark it as bootable
- parted -s ${SDIMG} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT})
- parted -s ${SDIMG} set 1 boot on
- # Create rootfs partition to the end of disk
- parted -s ${SDIMG} -- unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) -1s
- parted ${SDIMG} print
-
- # Create a vfat image with boot files
- BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
- rm -f ${WORKDIR}/boot.img
- mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
- mcopy -i ${WORKDIR}/boot.img -s ${IMAGE_ROOTFS}/boot/* ::/
-
- # Burn Partitions
- dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
- dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-}
-
-addtask rpi_sdimg before do_build after do_ext4_image
diff --git a/meta-isar/conf/conf-notes.txt b/meta-isar/conf/conf-notes.txt
index 87bd2dc..576b630 100644
--- a/meta-isar/conf/conf-notes.txt
+++ b/meta-isar/conf/conf-notes.txt
@@ -1,4 +1,3 @@
Common targets are:
multiconfig:qemuarm-stretch:isar-image-base
multiconfig:qemuamd64-stretch:isar-image-base
- multiconfig:rpi-jessie:isar-image-base
diff --git a/meta-isar/conf/distro/raspbian-configscript.sh b/meta-isar/conf/distro/raspbian-configscript.sh
deleted file mode 100644
index 7a32c5d..0000000
--- a/meta-isar/conf/distro/raspbian-configscript.sh
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/sh
-#
-# This software is a part of ISAR.
-# Copyright (C) 2015-2017 ilbers GmbH
-
-set -e
-
-readonly MACHINE_SERIAL="$1"
-readonly BAUDRATE_TTY="$2"
-
-# Enable tty conditionally, systemd does not have the file but its own magic
-if [ -f /etc/inittab ]; then
- echo "T0:23:respawn:/sbin/getty -L $MACHINE_SERIAL $BAUDRATE_TTY vt100" \
- >> /etc/inittab
-fi
-
-KERNEL_IMAGE="$(find /boot -maxdepth 1 -name "vmlinuz*" -printf "%p\n")"
-
-cat > /boot/config.txt << EOF
-kernel=$KERNEL_IMAGE
-EOF
diff --git a/meta-isar/conf/distro/raspbian-jessie.conf b/meta-isar/conf/distro/raspbian-jessie.conf
deleted file mode 100644
index 5e907e5..0000000
--- a/meta-isar/conf/distro/raspbian-jessie.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-# Raspbian stable distribution configuration
-#
-# This software is a part of ISAR.
-# Copyright (C) 2015-2016 ilbers GmbH
-
-BASE_DISTRO = "raspbian"
-BASE_DISTRO_CODENAME = "jessie"
-
-DISTRO_APT_SOURCES += "conf/distro/raspbian-jessie.list"
-DISTRO_APT_KEYS += "https://archive.raspbian.org/raspbian.public.key;sha256sum=ca59cd4f2bcbc3a1d41ba6815a02a8dc5c175467a59bd87edeac458f4a5345de"
-DISTRO_CONFIG_SCRIPT ?= "${LAYERDIR_isar}/conf/distro/raspbian-configscript.sh"
-DISTRO_KERNELS ?= "rpi rpi2 rpi-rpfv rpi2-rpfv"
diff --git a/meta-isar/conf/distro/raspbian-jessie.list b/meta-isar/conf/distro/raspbian-jessie.list
deleted file mode 100644
index 0a5af41..0000000
--- a/meta-isar/conf/distro/raspbian-jessie.list
+++ /dev/null
@@ -1,2 +0,0 @@
-deb http://archive.raspbian.org/raspbian jessie main contrib non-free firmware
-deb-src http://archive.raspbian.org/raspbian jessie main contrib non-free firmware
diff --git a/meta-isar/conf/local.conf.sample b/meta-isar/conf/local.conf.sample
index a671b20..3fd1538 100644
--- a/meta-isar/conf/local.conf.sample
+++ b/meta-isar/conf/local.conf.sample
@@ -53,7 +53,6 @@ BBMULTICONFIG = " \
hikey-stretch \
qemuamd64-buster \
qemuamd64-buster-tgz \
- rpi-jessie \
"
#
diff --git a/meta-isar/conf/machine/rpi.conf b/meta-isar/conf/machine/rpi.conf
deleted file mode 100644
index 31f2219..0000000
--- a/meta-isar/conf/machine/rpi.conf
+++ /dev/null
@@ -1,7 +0,0 @@
-# This software is a part of ISAR.
-# Copyright (C) 2015-2017 ilbers GmbH
-
-MACHINE_SERIAL ?= "ttyAMA0"
-BAUDRATE_TTY ?= "9600"
-
-IMAGE_TYPE ?= "rpi-sdimg"
diff --git a/meta-isar/conf/multiconfig/rpi-jessie.conf b/meta-isar/conf/multiconfig/rpi-jessie.conf
deleted file mode 100644
index 03c32e2..0000000
--- a/meta-isar/conf/multiconfig/rpi-jessie.conf
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# This software is a part of ISAR.
-# Copyright (C) 2015-2017 ilbers GmbH
-#
-# This configuration file is a part of bitbake multiconfig. Bitbake combines
-# these settings with local.conf ones and start task execution with this
-# environment.
-
-# This sets the default machine to be rpi in this configuration:
-MACHINE ?= "rpi"
-
-# This sets the default distribution configuration:
-DISTRO ?= "raspbian-jessie"
-DISTRO_ARCH ?= "armhf"
-
-KERNEL_NAME ?= "rpi-rpfv"
-
-IMAGE_PREINSTALL += " \
- bind9-host \
- dnsutils \
- iproute2 \
- iputils-ping \
- isc-dhcp-client \
- lrzsz \
- net-tools \
- netcat-openbsd \
- openssh-client \
- openssh-server \
- raspberrypi-bootloader-nokernel \
- telnet \
- traceroute \
- vim \
- "
diff --git a/meta-isar/recipes-app/hello/hello_2.9.bb b/meta-isar/recipes-app/hello/hello_2.9.bb
index 63d1562..8e01b6f 100644
--- a/meta-isar/recipes-app/hello/hello_2.9.bb
+++ b/meta-isar/recipes-app/hello/hello_2.9.bb
@@ -8,4 +8,3 @@
require hello.inc
DEFAULT_PREFERENCE_debian-jessie = "1"
-DEFAULT_PREFERENCE_raspbian-jessie = "1"
diff --git a/meta-isar/recipes-kernel/example-module/example-module.bb b/meta-isar/recipes-kernel/example-module/example-module.bb
index b725416..fe4b18f 100644
--- a/meta-isar/recipes-kernel/example-module/example-module.bb
+++ b/meta-isar/recipes-kernel/example-module/example-module.bb
@@ -11,7 +11,7 @@
# has hard dependencies from linux-compiler-gcc-4.8-arm, what
# conflicts with the host binaries.
python() {
- if d.getVar('KERNEL_NAME') in ['armmp', 'arm64', 'rpi-rpfv', 'amd64', '686-pae']:
+ if d.getVar('KERNEL_NAME') in ['armmp', 'arm64', 'amd64', '686-pae']:
d.setVar('ISAR_CROSS_COMPILE', '0')
}
diff --git a/scripts/ci_build.sh b/scripts/ci_build.sh
index 1789183..dc0158d 100755
--- a/scripts/ci_build.sh
+++ b/scripts/ci_build.sh
@@ -115,7 +115,6 @@ else
multiconfig:qemuamd64-stretch:isar-image-base \
multiconfig:qemuamd64-buster:isar-image-base \
multiconfig:qemuamd64-buster-tgz:isar-image-base \
- multiconfig:rpi-jessie:isar-image-base
# qemu-user-static of <= buster too old to build that
#multiconfig:qemuarm64-buster:isar-image-base
fi
--
2.20.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Discussion] Deprecating Raspberry Pi
2019-02-11 12:41 [Discussion] Deprecating Raspberry Pi Claudius Heine
2019-02-11 12:48 ` Jan Kiszka
2019-02-11 13:51 ` [PATCH] remove raspberry support claudius.heine.ext
@ 2019-02-11 14:03 ` Baurzhan Ismagulov
2019-02-11 14:11 ` Claudius Heine
2019-02-17 10:44 ` Baurzhan Ismagulov
3 siblings, 1 reply; 17+ messages in thread
From: Baurzhan Ismagulov @ 2019-02-11 14:03 UTC (permalink / raw)
To: isar-users
On Mon, Feb 11, 2019 at 01:41:19PM +0100, Claudius Heine wrote:
> is anybody currently using Isar to build for Raspberry Pi?
>
> If that target is not maintained and used, then I would be in favor of
> removing it from meta-isar.
>
> I just tried to boot the 'isar-image-base.rpi-sdimg' image of the current
> next branch (d88c739323ecdecc) on a Raspberry Pi 1 without success.
>
> Currently RPi support with jessie is holding us back to deprecate jessie and
> removing the loop mounts that is required by the old versions of mkfs.ext4.
> So I would be in favor of eigher removing RPi1 support or switching to
> stretch with that, if there are maintainers that regularly test if booting
> works.
FWIW, I'm still using rpi1. I agree it should at least be updated. I also find
Raspbian to be a good test case for flexibility of Isar, so I'd like to keep
it; that doesn't prevent us from adding Ubuntu support as well. Let me check
what has to be done for the update.
With kind regards,
Baurzhan.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH] remove raspberry support
2019-02-11 13:51 ` [PATCH] remove raspberry support claudius.heine.ext
@ 2019-02-11 14:03 ` Jan Kiszka
2019-02-12 9:30 ` [PATCH v2] remove RaspberryPi support claudius.heine.ext
0 siblings, 1 reply; 17+ messages in thread
From: Jan Kiszka @ 2019-02-11 14:03 UTC (permalink / raw)
To: [ext] claudius.heine.ext@siemens.com, isar-users; +Cc: Claudius Heine
On 11.02.19 14:51, [ext] claudius.heine.ext@siemens.com wrote:
> From: Claudius Heine <ch@denx.de>
>
Such patches should always repeat the reasoning in the commit log.
Jan
> Signed-off-by: Claudius Heine <ch@denx.de>
> ---
> README.md | 4 --
> doc/user_manual.md | 30 +---------
> meta-isar/classes/rpi-sdimg.bbclass | 57 -------------------
> meta-isar/conf/conf-notes.txt | 1 -
> .../conf/distro/raspbian-configscript.sh | 21 -------
> meta-isar/conf/distro/raspbian-jessie.conf | 12 ----
> meta-isar/conf/distro/raspbian-jessie.list | 2 -
> meta-isar/conf/local.conf.sample | 1 -
> meta-isar/conf/machine/rpi.conf | 7 ---
> meta-isar/conf/multiconfig/rpi-jessie.conf | 33 -----------
> meta-isar/recipes-app/hello/hello_2.9.bb | 1 -
> .../example-module/example-module.bb | 2 +-
> scripts/ci_build.sh | 1 -
> 13 files changed, 4 insertions(+), 168 deletions(-)
> delete mode 100644 meta-isar/classes/rpi-sdimg.bbclass
> delete mode 100644 meta-isar/conf/distro/raspbian-configscript.sh
> delete mode 100644 meta-isar/conf/distro/raspbian-jessie.conf
> delete mode 100644 meta-isar/conf/distro/raspbian-jessie.list
> delete mode 100644 meta-isar/conf/machine/rpi.conf
> delete mode 100644 meta-isar/conf/multiconfig/rpi-jessie.conf
>
> diff --git a/README.md b/README.md
> index 7094c88..1af703b 100644
> --- a/README.md
> +++ b/README.md
> @@ -20,10 +20,6 @@ To test the QEMU image, run the following command:
>
> The default root password is 'root'.
>
> -To test the RPi board, flash the image to an SD card using the instructions from the official site,
> -section "WRITING AN IMAGE TO THE SD CARD":
> - https://www.raspberrypi.org/documentation/installation/installing-images/README.md
> -
> # Supported distributions
>
> List of supported distributions, architectures and features can be found in the [Supported_Configurations](Supported_Configurations.md).
> diff --git a/doc/user_manual.md b/doc/user_manual.md
> index ff4939c..b73d63d 100644
> --- a/doc/user_manual.md
> +++ b/doc/user_manual.md
> @@ -149,7 +149,6 @@ BBMULTICONFIG = " \
> qemuamd64-jessie \
> qemuamd64-stretch \
> qemuamd64-buster \
> - rpi-jessie \
> bananapi-stretch \
> "
> ```
> @@ -168,7 +167,6 @@ $ bitbake \
> multiconfig:qemuamd64-jessie:isar-image-base \
> multiconfig:qemuamd64-stretch:isar-image-base \
> multiconfig:qemuamd64-buster:isar-image-base \
> - multiconfig:rpi-jessie:isar-image-base \
> multiconfig:bananapi-stretch:isar-image-base
> ```
>
> @@ -183,7 +181,6 @@ tmp/deploy/images/isar-image-base-debian-jessie-qemui386.ext4.img
> tmp/deploy/images/isar-image-base-debian-stretch-qemui386.ext4.img
> tmp/deploy/images/isar-image-base-debian-jessie-qemuamd64.ext4.img
> tmp/deploy/images/isar-image-base-debian-stretch-qemuamd64.ext4.img
> -tmp/deploy/images/isar-image-base.rpi-sdimg
> tmp/deploy/images/isar-image-base-debian-stretch-bananapi.wic.img
> ```
>
> @@ -287,10 +284,10 @@ images for.
> If BitBake is called with image targets (e.g., `isar-image-base`), the
> following variables define the default configuration to build for:
>
> - - `MACHINE` - The board to build for (e.g., `qemuarm`, `rpi`). BitBake looks
> + - `MACHINE` - The board to build for (e.g., `qemuarm`, `qemuamd64`). BitBake looks
> for conf/multiconfig/${MACHINE}.conf in every layer.
>
> - - `DISTRO` - The distro to use (e.g. `raspbian-jessie`, `debian-stretch`).
> + - `DISTRO` - The distro to use (e.g. `debian-buster`, `debian-stretch`).
> BitBake looks for conf/distro/${DISTRO}.conf in every layer.
>
> - `DISTRO_ARCH` - The Debian architecture to build for (e.g., `armhf`).
> @@ -324,7 +321,6 @@ In Isar, each machine can use its specific Linux distro to generate `buildchroot
> - debian-jessie
> - debian-stretch
> - debian-buster
> - - raspbian-jessie
>
> User can select appropriate distro for specific machine by setting the following variable in machine configuration file:
> ```
> @@ -349,7 +345,6 @@ Please refer to `Add a Custom Application` section for more information about wr
> Isar can generate various images types for specific machine. The type of the image to be generated may be specified through the `IMAGE_TYPE` variable. Currently, the following image types are provided:
>
> - `ext4` - Raw ext4 filesystem image (default option for `qemuarm` machine).
> - - `rpi-sdimg` - A complete, partitioned Raspberry Pi SD card image (default option for the `rpi` machine).
> - `wic-img` - A full disk image with user-specified partitions created and populated using the wic tool.
>
> ---
> @@ -363,14 +358,6 @@ The distro is defined by the set of the following variables:
> - `DISTRO_APT_PREFERENCES` - List of apt preference files
> - `DISTRO_KERNELS` - List of supported kernel suffixes
>
> -Below is an example for Raspbian Jessie:
> -```
> -DISTRO_APT_SOURCES += "conf/distro/raspbian-jessie.list"
> -DISTRO_APT_KEYS += "https://archive.raspbian.org/raspbian.public.key;sha256sum=ca59cd4f2bcbc3a1d41ba6815a02a8dc5c175467a59bd87edeac458f4a5345de"
> -DISTRO_CONFIG_SCRIPT?= "raspbian-configscript.sh"
> -DISTRO_KERNELS ?= "rpi rpi2 rpi-rpfv rpi2-rpfv"
> -```
> -
> To add new distro, user should perform the following steps:
>
> - Create `distro` folder in your layer:
> @@ -404,16 +391,6 @@ Every machine is described in its configuration file. The file defines the follo
> - `MACHINE_SERIAL` - The name of serial device that will be used for console output.
> - `IMAGE_TYPE` - The type of images to be generated for this machine.
>
> -Below is an example of machine configuration file for `Raspberry Pi` board:
> -```
> -IMAGE_PREINSTALL = "linux-image-rpi-rpfv \
> - raspberrypi-bootloader-nokernel"
> -KERNEL_IMAGE = "vmlinuz-4.4.0-1-rpi"
> -INITRD_IMAGE = "initrd.img-4.4.0-1-rpi"
> -MACHINE_SERIAL = "ttyAMA0"
> -IMAGE_TYPE = "rpi-sdimg"
> -```
> -
> To add new machine user should perform the following steps:
>
> - Create the `machine` directory in your layer:
> @@ -472,10 +449,9 @@ IMAGE_TYPE = "my-image"
>
> ### Reference Classes
>
> -Isar contains three image type classes that can be used as reference:
> +Isar contains additional image type classes that can be used as reference:
>
> - `ext4-img`
> - - `rpi-sdimg`
> - `wic-img`
>
> ---
> diff --git a/meta-isar/classes/rpi-sdimg.bbclass b/meta-isar/classes/rpi-sdimg.bbclass
> deleted file mode 100644
> index 91b09cd..0000000
> --- a/meta-isar/classes/rpi-sdimg.bbclass
> +++ /dev/null
> @@ -1,57 +0,0 @@
> -# This software is a part of ISAR.
> -# Copyright (C) 2015-2016 ilbers GmbH
> -#
> -# Based on SD class from meta-raspberrypi
> -
> -inherit ext4-img
> -
> -# Boot partition volume id
> -BOOTDD_VOLUME_ID ?= "${MACHINE}"
> -
> -# Boot partition size [in KiB]
> -BOOT_SPACE ?= "40960"
> -
> -# Set alignment to 4MB [in KiB]
> -IMAGE_ROOTFS_ALIGNMENT = "4096"
> -
> -SDIMG = "${DEPLOY_DIR_IMAGE}/${PN}.rpi-sdimg"
> -SDIMG_ROOTFS = "${EXT4_IMAGE_FILE}"
> -
> -do_rpi_sdimg () {
> - # Align partitions
> - ROOTFS_SIZE=$(du -b ${SDIMG_ROOTFS} | cut -f 1)
> - ROOTFS_SIZE=$(expr ${ROOTFS_SIZE} + 1)
> - ROOTFS_SIZE=$(expr ${ROOTFS_SIZE} - ${ROOTFS_SIZE} % 1024)
> - ROOTFS_SIZE=$(expr ${ROOTFS_SIZE} / 1024)
> - ROOTFS_SIZE=$(expr ${ROOTFS_SIZE} - ${ROOTFS_SIZE} % ${IMAGE_ROOTFS_ALIGNMENT} + ${IMAGE_ROOTFS_ALIGNMENT})
> -
> - BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
> - BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
> - SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + ${ROOTFS_SIZE})
> -
> - echo "Creating filesystem with Boot partition ${BOOT_SPACE_ALIGNED} KiB and RootFS $ROOTFS_SIZE KiB"
> -
> - #Initialize sdcard image file
> - dd if=/dev/zero of=${SDIMG} bs=1024 count=0 seek=${SDIMG_SIZE}
> -
> - # Create partition table
> - parted -s ${SDIMG} mklabel msdos
> - # Create boot partition and mark it as bootable
> - parted -s ${SDIMG} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT})
> - parted -s ${SDIMG} set 1 boot on
> - # Create rootfs partition to the end of disk
> - parted -s ${SDIMG} -- unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) -1s
> - parted ${SDIMG} print
> -
> - # Create a vfat image with boot files
> - BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
> - rm -f ${WORKDIR}/boot.img
> - mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
> - mcopy -i ${WORKDIR}/boot.img -s ${IMAGE_ROOTFS}/boot/* ::/
> -
> - # Burn Partitions
> - dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
> - dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
> -}
> -
> -addtask rpi_sdimg before do_build after do_ext4_image
> diff --git a/meta-isar/conf/conf-notes.txt b/meta-isar/conf/conf-notes.txt
> index 87bd2dc..576b630 100644
> --- a/meta-isar/conf/conf-notes.txt
> +++ b/meta-isar/conf/conf-notes.txt
> @@ -1,4 +1,3 @@
> Common targets are:
> multiconfig:qemuarm-stretch:isar-image-base
> multiconfig:qemuamd64-stretch:isar-image-base
> - multiconfig:rpi-jessie:isar-image-base
> diff --git a/meta-isar/conf/distro/raspbian-configscript.sh b/meta-isar/conf/distro/raspbian-configscript.sh
> deleted file mode 100644
> index 7a32c5d..0000000
> --- a/meta-isar/conf/distro/raspbian-configscript.sh
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -#!/bin/sh
> -#
> -# This software is a part of ISAR.
> -# Copyright (C) 2015-2017 ilbers GmbH
> -
> -set -e
> -
> -readonly MACHINE_SERIAL="$1"
> -readonly BAUDRATE_TTY="$2"
> -
> -# Enable tty conditionally, systemd does not have the file but its own magic
> -if [ -f /etc/inittab ]; then
> - echo "T0:23:respawn:/sbin/getty -L $MACHINE_SERIAL $BAUDRATE_TTY vt100" \
> - >> /etc/inittab
> -fi
> -
> -KERNEL_IMAGE="$(find /boot -maxdepth 1 -name "vmlinuz*" -printf "%p\n")"
> -
> -cat > /boot/config.txt << EOF
> -kernel=$KERNEL_IMAGE
> -EOF
> diff --git a/meta-isar/conf/distro/raspbian-jessie.conf b/meta-isar/conf/distro/raspbian-jessie.conf
> deleted file mode 100644
> index 5e907e5..0000000
> --- a/meta-isar/conf/distro/raspbian-jessie.conf
> +++ /dev/null
> @@ -1,12 +0,0 @@
> -# Raspbian stable distribution configuration
> -#
> -# This software is a part of ISAR.
> -# Copyright (C) 2015-2016 ilbers GmbH
> -
> -BASE_DISTRO = "raspbian"
> -BASE_DISTRO_CODENAME = "jessie"
> -
> -DISTRO_APT_SOURCES += "conf/distro/raspbian-jessie.list"
> -DISTRO_APT_KEYS += "https://archive.raspbian.org/raspbian.public.key;sha256sum=ca59cd4f2bcbc3a1d41ba6815a02a8dc5c175467a59bd87edeac458f4a5345de"
> -DISTRO_CONFIG_SCRIPT ?= "${LAYERDIR_isar}/conf/distro/raspbian-configscript.sh"
> -DISTRO_KERNELS ?= "rpi rpi2 rpi-rpfv rpi2-rpfv"
> diff --git a/meta-isar/conf/distro/raspbian-jessie.list b/meta-isar/conf/distro/raspbian-jessie.list
> deleted file mode 100644
> index 0a5af41..0000000
> --- a/meta-isar/conf/distro/raspbian-jessie.list
> +++ /dev/null
> @@ -1,2 +0,0 @@
> -deb http://archive.raspbian.org/raspbian jessie main contrib non-free firmware
> -deb-src http://archive.raspbian.org/raspbian jessie main contrib non-free firmware
> diff --git a/meta-isar/conf/local.conf.sample b/meta-isar/conf/local.conf.sample
> index a671b20..3fd1538 100644
> --- a/meta-isar/conf/local.conf.sample
> +++ b/meta-isar/conf/local.conf.sample
> @@ -53,7 +53,6 @@ BBMULTICONFIG = " \
> hikey-stretch \
> qemuamd64-buster \
> qemuamd64-buster-tgz \
> - rpi-jessie \
> "
>
> #
> diff --git a/meta-isar/conf/machine/rpi.conf b/meta-isar/conf/machine/rpi.conf
> deleted file mode 100644
> index 31f2219..0000000
> --- a/meta-isar/conf/machine/rpi.conf
> +++ /dev/null
> @@ -1,7 +0,0 @@
> -# This software is a part of ISAR.
> -# Copyright (C) 2015-2017 ilbers GmbH
> -
> -MACHINE_SERIAL ?= "ttyAMA0"
> -BAUDRATE_TTY ?= "9600"
> -
> -IMAGE_TYPE ?= "rpi-sdimg"
> diff --git a/meta-isar/conf/multiconfig/rpi-jessie.conf b/meta-isar/conf/multiconfig/rpi-jessie.conf
> deleted file mode 100644
> index 03c32e2..0000000
> --- a/meta-isar/conf/multiconfig/rpi-jessie.conf
> +++ /dev/null
> @@ -1,33 +0,0 @@
> -#
> -# This software is a part of ISAR.
> -# Copyright (C) 2015-2017 ilbers GmbH
> -#
> -# This configuration file is a part of bitbake multiconfig. Bitbake combines
> -# these settings with local.conf ones and start task execution with this
> -# environment.
> -
> -# This sets the default machine to be rpi in this configuration:
> -MACHINE ?= "rpi"
> -
> -# This sets the default distribution configuration:
> -DISTRO ?= "raspbian-jessie"
> -DISTRO_ARCH ?= "armhf"
> -
> -KERNEL_NAME ?= "rpi-rpfv"
> -
> -IMAGE_PREINSTALL += " \
> - bind9-host \
> - dnsutils \
> - iproute2 \
> - iputils-ping \
> - isc-dhcp-client \
> - lrzsz \
> - net-tools \
> - netcat-openbsd \
> - openssh-client \
> - openssh-server \
> - raspberrypi-bootloader-nokernel \
> - telnet \
> - traceroute \
> - vim \
> - "
> diff --git a/meta-isar/recipes-app/hello/hello_2.9.bb b/meta-isar/recipes-app/hello/hello_2.9.bb
> index 63d1562..8e01b6f 100644
> --- a/meta-isar/recipes-app/hello/hello_2.9.bb
> +++ b/meta-isar/recipes-app/hello/hello_2.9.bb
> @@ -8,4 +8,3 @@
> require hello.inc
>
> DEFAULT_PREFERENCE_debian-jessie = "1"
> -DEFAULT_PREFERENCE_raspbian-jessie = "1"
> diff --git a/meta-isar/recipes-kernel/example-module/example-module.bb b/meta-isar/recipes-kernel/example-module/example-module.bb
> index b725416..fe4b18f 100644
> --- a/meta-isar/recipes-kernel/example-module/example-module.bb
> +++ b/meta-isar/recipes-kernel/example-module/example-module.bb
> @@ -11,7 +11,7 @@
> # has hard dependencies from linux-compiler-gcc-4.8-arm, what
> # conflicts with the host binaries.
> python() {
> - if d.getVar('KERNEL_NAME') in ['armmp', 'arm64', 'rpi-rpfv', 'amd64', '686-pae']:
> + if d.getVar('KERNEL_NAME') in ['armmp', 'arm64', 'amd64', '686-pae']:
> d.setVar('ISAR_CROSS_COMPILE', '0')
> }
>
> diff --git a/scripts/ci_build.sh b/scripts/ci_build.sh
> index 1789183..dc0158d 100755
> --- a/scripts/ci_build.sh
> +++ b/scripts/ci_build.sh
> @@ -115,7 +115,6 @@ else
> multiconfig:qemuamd64-stretch:isar-image-base \
> multiconfig:qemuamd64-buster:isar-image-base \
> multiconfig:qemuamd64-buster-tgz:isar-image-base \
> - multiconfig:rpi-jessie:isar-image-base
> # qemu-user-static of <= buster too old to build that
> #multiconfig:qemuarm64-buster:isar-image-base
> fi
>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Discussion] Deprecating Raspberry Pi
2019-02-11 14:03 ` [Discussion] Deprecating Raspberry Pi Baurzhan Ismagulov
@ 2019-02-11 14:11 ` Claudius Heine
2019-02-11 14:27 ` Baurzhan Ismagulov
0 siblings, 1 reply; 17+ messages in thread
From: Claudius Heine @ 2019-02-11 14:11 UTC (permalink / raw)
To: isar-users
Hi Baurzhan,
On 11/02/2019 15.03, Baurzhan Ismagulov wrote:
> On Mon, Feb 11, 2019 at 01:41:19PM +0100, Claudius Heine wrote:
>> is anybody currently using Isar to build for Raspberry Pi?
>>
>> If that target is not maintained and used, then I would be in favor of
>> removing it from meta-isar.
>>
>> I just tried to boot the 'isar-image-base.rpi-sdimg' image of the current
>> next branch (d88c739323ecdecc) on a Raspberry Pi 1 without success.
>>
>> Currently RPi support with jessie is holding us back to deprecate jessie and
>> removing the loop mounts that is required by the old versions of mkfs.ext4.
>> So I would be in favor of eigher removing RPi1 support or switching to
>> stretch with that, if there are maintainers that regularly test if booting
>> works.
>
> FWIW, I'm still using rpi1. I agree it should at least be updated. I also find
> Raspbian to be a good test case for flexibility of Isar, so I'd like to keep
> it; that doesn't prevent us from adding Ubuntu support as well. Let me check
> what has to be done for the update.
Ok, since you are using it, and it currently does not boot AFAIK, does
that mean it is not tested regularly? IMO to have upstream support for a
board means that it should be tested in the CI or similar as well.
Otherwise it can be supported outside of Isar.
If you are willing to maintain RPi1 support then I have nothing against
leaving it in upstream Isar.
Cheers,
Claudius
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-54 Fax: (+49)-8142-66989-80 Email: ch@denx.de
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Discussion] Deprecating Raspberry Pi
2019-02-11 14:11 ` Claudius Heine
@ 2019-02-11 14:27 ` Baurzhan Ismagulov
2019-02-11 15:17 ` Claudius Heine
0 siblings, 1 reply; 17+ messages in thread
From: Baurzhan Ismagulov @ 2019-02-11 14:27 UTC (permalink / raw)
To: isar-users
On Mon, Feb 11, 2019 at 03:11:27PM +0100, Claudius Heine wrote:
> Ok, since you are using it, and it currently does not boot AFAIK, does that
> mean it is not tested regularly? IMO to have upstream support for a board
> means that it should be tested in the CI or similar as well. Otherwise it
> can be supported outside of Isar.
>
> If you are willing to maintain RPi1 support then I have nothing against
> leaving it in upstream Isar.
The last time I used it was in Oct. I agree that it should be tested regularly
if it is in Isar. Let me check what is wrong.
With kind regards,
Baurzhan.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Discussion] Deprecating Raspberry Pi
2019-02-11 14:27 ` Baurzhan Ismagulov
@ 2019-02-11 15:17 ` Claudius Heine
0 siblings, 0 replies; 17+ messages in thread
From: Claudius Heine @ 2019-02-11 15:17 UTC (permalink / raw)
To: isar-users
On 11/02/2019 15.27, Baurzhan Ismagulov wrote:
> On Mon, Feb 11, 2019 at 03:11:27PM +0100, Claudius Heine wrote:
>> Ok, since you are using it, and it currently does not boot AFAIK, does that
>> mean it is not tested regularly? IMO to have upstream support for a board
>> means that it should be tested in the CI or similar as well. Otherwise it
>> can be supported outside of Isar.
>>
>> If you are willing to maintain RPi1 support then I have nothing against
>> leaving it in upstream Isar.
>
> The last time I used it was in Oct. I agree that it should be tested regularly
> if it is in Isar. Let me check what is wrong.
Ok, great!
When you resolved that, then try to update it to stretch and switch the
image build to wic. Then we can drop or refactor the ext4-img.bbclass
(for refactor I was already working of that, but jessie support was
preventing me to submit that).
Next would be integration into the CI for that.
Thx!
Claudius
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-54 Fax: (+49)-8142-66989-80 Email: ch@denx.de
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH v2] remove RaspberryPi support
2019-02-11 14:03 ` Jan Kiszka
@ 2019-02-12 9:30 ` claudius.heine.ext
2019-02-12 11:39 ` Baurzhan Ismagulov
0 siblings, 1 reply; 17+ messages in thread
From: claudius.heine.ext @ 2019-02-12 9:30 UTC (permalink / raw)
To: isar-users; +Cc: Claudius Heine
From: Claudius Heine <ch@denx.de>
RaspberryPi is removed from meta-isar, because
- there currently no maintainers for it
- there is no automated boot test for it
- forces burden on rest of isar to support jessie
- very old board, most users should have moved on to RPi 2 or 3
If those points change, support for it can be readded.
Signed-off-by: Claudius Heine <ch@denx.de>
---
README.md | 4 --
doc/user_manual.md | 30 +---------
meta-isar/classes/rpi-sdimg.bbclass | 57 -------------------
meta-isar/conf/conf-notes.txt | 1 -
.../conf/distro/raspbian-configscript.sh | 21 -------
meta-isar/conf/distro/raspbian-jessie.conf | 12 ----
meta-isar/conf/distro/raspbian-jessie.list | 2 -
meta-isar/conf/local.conf.sample | 1 -
meta-isar/conf/machine/rpi.conf | 7 ---
meta-isar/conf/multiconfig/rpi-jessie.conf | 33 -----------
meta-isar/recipes-app/hello/hello_2.9.bb | 1 -
.../example-module/example-module.bb | 2 +-
scripts/ci_build.sh | 1 -
13 files changed, 4 insertions(+), 168 deletions(-)
delete mode 100644 meta-isar/classes/rpi-sdimg.bbclass
delete mode 100644 meta-isar/conf/distro/raspbian-configscript.sh
delete mode 100644 meta-isar/conf/distro/raspbian-jessie.conf
delete mode 100644 meta-isar/conf/distro/raspbian-jessie.list
delete mode 100644 meta-isar/conf/machine/rpi.conf
delete mode 100644 meta-isar/conf/multiconfig/rpi-jessie.conf
diff --git a/README.md b/README.md
index 7094c88..1af703b 100644
--- a/README.md
+++ b/README.md
@@ -20,10 +20,6 @@ To test the QEMU image, run the following command:
The default root password is 'root'.
-To test the RPi board, flash the image to an SD card using the instructions from the official site,
-section "WRITING AN IMAGE TO THE SD CARD":
- https://www.raspberrypi.org/documentation/installation/installing-images/README.md
-
# Supported distributions
List of supported distributions, architectures and features can be found in the [Supported_Configurations](Supported_Configurations.md).
diff --git a/doc/user_manual.md b/doc/user_manual.md
index ff4939c..b73d63d 100644
--- a/doc/user_manual.md
+++ b/doc/user_manual.md
@@ -149,7 +149,6 @@ BBMULTICONFIG = " \
qemuamd64-jessie \
qemuamd64-stretch \
qemuamd64-buster \
- rpi-jessie \
bananapi-stretch \
"
```
@@ -168,7 +167,6 @@ $ bitbake \
multiconfig:qemuamd64-jessie:isar-image-base \
multiconfig:qemuamd64-stretch:isar-image-base \
multiconfig:qemuamd64-buster:isar-image-base \
- multiconfig:rpi-jessie:isar-image-base \
multiconfig:bananapi-stretch:isar-image-base
```
@@ -183,7 +181,6 @@ tmp/deploy/images/isar-image-base-debian-jessie-qemui386.ext4.img
tmp/deploy/images/isar-image-base-debian-stretch-qemui386.ext4.img
tmp/deploy/images/isar-image-base-debian-jessie-qemuamd64.ext4.img
tmp/deploy/images/isar-image-base-debian-stretch-qemuamd64.ext4.img
-tmp/deploy/images/isar-image-base.rpi-sdimg
tmp/deploy/images/isar-image-base-debian-stretch-bananapi.wic.img
```
@@ -287,10 +284,10 @@ images for.
If BitBake is called with image targets (e.g., `isar-image-base`), the
following variables define the default configuration to build for:
- - `MACHINE` - The board to build for (e.g., `qemuarm`, `rpi`). BitBake looks
+ - `MACHINE` - The board to build for (e.g., `qemuarm`, `qemuamd64`). BitBake looks
for conf/multiconfig/${MACHINE}.conf in every layer.
- - `DISTRO` - The distro to use (e.g. `raspbian-jessie`, `debian-stretch`).
+ - `DISTRO` - The distro to use (e.g. `debian-buster`, `debian-stretch`).
BitBake looks for conf/distro/${DISTRO}.conf in every layer.
- `DISTRO_ARCH` - The Debian architecture to build for (e.g., `armhf`).
@@ -324,7 +321,6 @@ In Isar, each machine can use its specific Linux distro to generate `buildchroot
- debian-jessie
- debian-stretch
- debian-buster
- - raspbian-jessie
User can select appropriate distro for specific machine by setting the following variable in machine configuration file:
```
@@ -349,7 +345,6 @@ Please refer to `Add a Custom Application` section for more information about wr
Isar can generate various images types for specific machine. The type of the image to be generated may be specified through the `IMAGE_TYPE` variable. Currently, the following image types are provided:
- `ext4` - Raw ext4 filesystem image (default option for `qemuarm` machine).
- - `rpi-sdimg` - A complete, partitioned Raspberry Pi SD card image (default option for the `rpi` machine).
- `wic-img` - A full disk image with user-specified partitions created and populated using the wic tool.
---
@@ -363,14 +358,6 @@ The distro is defined by the set of the following variables:
- `DISTRO_APT_PREFERENCES` - List of apt preference files
- `DISTRO_KERNELS` - List of supported kernel suffixes
-Below is an example for Raspbian Jessie:
-```
-DISTRO_APT_SOURCES += "conf/distro/raspbian-jessie.list"
-DISTRO_APT_KEYS += "https://archive.raspbian.org/raspbian.public.key;sha256sum=ca59cd4f2bcbc3a1d41ba6815a02a8dc5c175467a59bd87edeac458f4a5345de"
-DISTRO_CONFIG_SCRIPT?= "raspbian-configscript.sh"
-DISTRO_KERNELS ?= "rpi rpi2 rpi-rpfv rpi2-rpfv"
-```
-
To add new distro, user should perform the following steps:
- Create `distro` folder in your layer:
@@ -404,16 +391,6 @@ Every machine is described in its configuration file. The file defines the follo
- `MACHINE_SERIAL` - The name of serial device that will be used for console output.
- `IMAGE_TYPE` - The type of images to be generated for this machine.
-Below is an example of machine configuration file for `Raspberry Pi` board:
-```
-IMAGE_PREINSTALL = "linux-image-rpi-rpfv \
- raspberrypi-bootloader-nokernel"
-KERNEL_IMAGE = "vmlinuz-4.4.0-1-rpi"
-INITRD_IMAGE = "initrd.img-4.4.0-1-rpi"
-MACHINE_SERIAL = "ttyAMA0"
-IMAGE_TYPE = "rpi-sdimg"
-```
-
To add new machine user should perform the following steps:
- Create the `machine` directory in your layer:
@@ -472,10 +449,9 @@ IMAGE_TYPE = "my-image"
### Reference Classes
-Isar contains three image type classes that can be used as reference:
+Isar contains additional image type classes that can be used as reference:
- `ext4-img`
- - `rpi-sdimg`
- `wic-img`
---
diff --git a/meta-isar/classes/rpi-sdimg.bbclass b/meta-isar/classes/rpi-sdimg.bbclass
deleted file mode 100644
index 91b09cd..0000000
--- a/meta-isar/classes/rpi-sdimg.bbclass
+++ /dev/null
@@ -1,57 +0,0 @@
-# This software is a part of ISAR.
-# Copyright (C) 2015-2016 ilbers GmbH
-#
-# Based on SD class from meta-raspberrypi
-
-inherit ext4-img
-
-# Boot partition volume id
-BOOTDD_VOLUME_ID ?= "${MACHINE}"
-
-# Boot partition size [in KiB]
-BOOT_SPACE ?= "40960"
-
-# Set alignment to 4MB [in KiB]
-IMAGE_ROOTFS_ALIGNMENT = "4096"
-
-SDIMG = "${DEPLOY_DIR_IMAGE}/${PN}.rpi-sdimg"
-SDIMG_ROOTFS = "${EXT4_IMAGE_FILE}"
-
-do_rpi_sdimg () {
- # Align partitions
- ROOTFS_SIZE=$(du -b ${SDIMG_ROOTFS} | cut -f 1)
- ROOTFS_SIZE=$(expr ${ROOTFS_SIZE} + 1)
- ROOTFS_SIZE=$(expr ${ROOTFS_SIZE} - ${ROOTFS_SIZE} % 1024)
- ROOTFS_SIZE=$(expr ${ROOTFS_SIZE} / 1024)
- ROOTFS_SIZE=$(expr ${ROOTFS_SIZE} - ${ROOTFS_SIZE} % ${IMAGE_ROOTFS_ALIGNMENT} + ${IMAGE_ROOTFS_ALIGNMENT})
-
- BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
- BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
- SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + ${ROOTFS_SIZE})
-
- echo "Creating filesystem with Boot partition ${BOOT_SPACE_ALIGNED} KiB and RootFS $ROOTFS_SIZE KiB"
-
- #Initialize sdcard image file
- dd if=/dev/zero of=${SDIMG} bs=1024 count=0 seek=${SDIMG_SIZE}
-
- # Create partition table
- parted -s ${SDIMG} mklabel msdos
- # Create boot partition and mark it as bootable
- parted -s ${SDIMG} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT})
- parted -s ${SDIMG} set 1 boot on
- # Create rootfs partition to the end of disk
- parted -s ${SDIMG} -- unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) -1s
- parted ${SDIMG} print
-
- # Create a vfat image with boot files
- BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
- rm -f ${WORKDIR}/boot.img
- mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
- mcopy -i ${WORKDIR}/boot.img -s ${IMAGE_ROOTFS}/boot/* ::/
-
- # Burn Partitions
- dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
- dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-}
-
-addtask rpi_sdimg before do_build after do_ext4_image
diff --git a/meta-isar/conf/conf-notes.txt b/meta-isar/conf/conf-notes.txt
index 87bd2dc..576b630 100644
--- a/meta-isar/conf/conf-notes.txt
+++ b/meta-isar/conf/conf-notes.txt
@@ -1,4 +1,3 @@
Common targets are:
multiconfig:qemuarm-stretch:isar-image-base
multiconfig:qemuamd64-stretch:isar-image-base
- multiconfig:rpi-jessie:isar-image-base
diff --git a/meta-isar/conf/distro/raspbian-configscript.sh b/meta-isar/conf/distro/raspbian-configscript.sh
deleted file mode 100644
index 7a32c5d..0000000
--- a/meta-isar/conf/distro/raspbian-configscript.sh
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/sh
-#
-# This software is a part of ISAR.
-# Copyright (C) 2015-2017 ilbers GmbH
-
-set -e
-
-readonly MACHINE_SERIAL="$1"
-readonly BAUDRATE_TTY="$2"
-
-# Enable tty conditionally, systemd does not have the file but its own magic
-if [ -f /etc/inittab ]; then
- echo "T0:23:respawn:/sbin/getty -L $MACHINE_SERIAL $BAUDRATE_TTY vt100" \
- >> /etc/inittab
-fi
-
-KERNEL_IMAGE="$(find /boot -maxdepth 1 -name "vmlinuz*" -printf "%p\n")"
-
-cat > /boot/config.txt << EOF
-kernel=$KERNEL_IMAGE
-EOF
diff --git a/meta-isar/conf/distro/raspbian-jessie.conf b/meta-isar/conf/distro/raspbian-jessie.conf
deleted file mode 100644
index 5e907e5..0000000
--- a/meta-isar/conf/distro/raspbian-jessie.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-# Raspbian stable distribution configuration
-#
-# This software is a part of ISAR.
-# Copyright (C) 2015-2016 ilbers GmbH
-
-BASE_DISTRO = "raspbian"
-BASE_DISTRO_CODENAME = "jessie"
-
-DISTRO_APT_SOURCES += "conf/distro/raspbian-jessie.list"
-DISTRO_APT_KEYS += "https://archive.raspbian.org/raspbian.public.key;sha256sum=ca59cd4f2bcbc3a1d41ba6815a02a8dc5c175467a59bd87edeac458f4a5345de"
-DISTRO_CONFIG_SCRIPT ?= "${LAYERDIR_isar}/conf/distro/raspbian-configscript.sh"
-DISTRO_KERNELS ?= "rpi rpi2 rpi-rpfv rpi2-rpfv"
diff --git a/meta-isar/conf/distro/raspbian-jessie.list b/meta-isar/conf/distro/raspbian-jessie.list
deleted file mode 100644
index 0a5af41..0000000
--- a/meta-isar/conf/distro/raspbian-jessie.list
+++ /dev/null
@@ -1,2 +0,0 @@
-deb http://archive.raspbian.org/raspbian jessie main contrib non-free firmware
-deb-src http://archive.raspbian.org/raspbian jessie main contrib non-free firmware
diff --git a/meta-isar/conf/local.conf.sample b/meta-isar/conf/local.conf.sample
index a671b20..3fd1538 100644
--- a/meta-isar/conf/local.conf.sample
+++ b/meta-isar/conf/local.conf.sample
@@ -53,7 +53,6 @@ BBMULTICONFIG = " \
hikey-stretch \
qemuamd64-buster \
qemuamd64-buster-tgz \
- rpi-jessie \
"
#
diff --git a/meta-isar/conf/machine/rpi.conf b/meta-isar/conf/machine/rpi.conf
deleted file mode 100644
index 31f2219..0000000
--- a/meta-isar/conf/machine/rpi.conf
+++ /dev/null
@@ -1,7 +0,0 @@
-# This software is a part of ISAR.
-# Copyright (C) 2015-2017 ilbers GmbH
-
-MACHINE_SERIAL ?= "ttyAMA0"
-BAUDRATE_TTY ?= "9600"
-
-IMAGE_TYPE ?= "rpi-sdimg"
diff --git a/meta-isar/conf/multiconfig/rpi-jessie.conf b/meta-isar/conf/multiconfig/rpi-jessie.conf
deleted file mode 100644
index 03c32e2..0000000
--- a/meta-isar/conf/multiconfig/rpi-jessie.conf
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# This software is a part of ISAR.
-# Copyright (C) 2015-2017 ilbers GmbH
-#
-# This configuration file is a part of bitbake multiconfig. Bitbake combines
-# these settings with local.conf ones and start task execution with this
-# environment.
-
-# This sets the default machine to be rpi in this configuration:
-MACHINE ?= "rpi"
-
-# This sets the default distribution configuration:
-DISTRO ?= "raspbian-jessie"
-DISTRO_ARCH ?= "armhf"
-
-KERNEL_NAME ?= "rpi-rpfv"
-
-IMAGE_PREINSTALL += " \
- bind9-host \
- dnsutils \
- iproute2 \
- iputils-ping \
- isc-dhcp-client \
- lrzsz \
- net-tools \
- netcat-openbsd \
- openssh-client \
- openssh-server \
- raspberrypi-bootloader-nokernel \
- telnet \
- traceroute \
- vim \
- "
diff --git a/meta-isar/recipes-app/hello/hello_2.9.bb b/meta-isar/recipes-app/hello/hello_2.9.bb
index 63d1562..8e01b6f 100644
--- a/meta-isar/recipes-app/hello/hello_2.9.bb
+++ b/meta-isar/recipes-app/hello/hello_2.9.bb
@@ -8,4 +8,3 @@
require hello.inc
DEFAULT_PREFERENCE_debian-jessie = "1"
-DEFAULT_PREFERENCE_raspbian-jessie = "1"
diff --git a/meta-isar/recipes-kernel/example-module/example-module.bb b/meta-isar/recipes-kernel/example-module/example-module.bb
index b725416..fe4b18f 100644
--- a/meta-isar/recipes-kernel/example-module/example-module.bb
+++ b/meta-isar/recipes-kernel/example-module/example-module.bb
@@ -11,7 +11,7 @@
# has hard dependencies from linux-compiler-gcc-4.8-arm, what
# conflicts with the host binaries.
python() {
- if d.getVar('KERNEL_NAME') in ['armmp', 'arm64', 'rpi-rpfv', 'amd64', '686-pae']:
+ if d.getVar('KERNEL_NAME') in ['armmp', 'arm64', 'amd64', '686-pae']:
d.setVar('ISAR_CROSS_COMPILE', '0')
}
diff --git a/scripts/ci_build.sh b/scripts/ci_build.sh
index 1789183..dc0158d 100755
--- a/scripts/ci_build.sh
+++ b/scripts/ci_build.sh
@@ -115,7 +115,6 @@ else
multiconfig:qemuamd64-stretch:isar-image-base \
multiconfig:qemuamd64-buster:isar-image-base \
multiconfig:qemuamd64-buster-tgz:isar-image-base \
- multiconfig:rpi-jessie:isar-image-base
# qemu-user-static of <= buster too old to build that
#multiconfig:qemuarm64-buster:isar-image-base
fi
--
2.20.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2] remove RaspberryPi support
2019-02-12 9:30 ` [PATCH v2] remove RaspberryPi support claudius.heine.ext
@ 2019-02-12 11:39 ` Baurzhan Ismagulov
2019-02-12 12:41 ` Claudius Heine
0 siblings, 1 reply; 17+ messages in thread
From: Baurzhan Ismagulov @ 2019-02-12 11:39 UTC (permalink / raw)
To: isar-users
On Tue, Feb 12, 2019 at 10:30:36AM +0100, claudius.heine.ext@siemens.com wrote:
> RaspberryPi is removed from meta-isar, because
> - there currently no maintainers for it
> - there is no automated boot test for it
> - forces burden on rest of isar to support jessie
> - very old board, most users should have moved on to RPi 2 or 3
>
> If those points change, support for it can be readded.
- There is a maintaner (the process has to be improved)
- Testing doesn't have to be automated (automation desired mid- to long-term)
- There is value in supporting old boards as long as it is reasonable
- I think we should strive for evolution and not discrete add-remove jumps
The burden issue demonstrates one of the fundamental ideas behind Isar. After
some time, people end up building for different suites. Many people who release
stretch today will build for stretch and buster tomorrow. Maybe now is the time
to make pluggable mechanisms for different suites. Without satisfying that
need, Isar won't be serving people in the long run, IMHO.
Regarding rpi1, I'd be reluctant to remove without understanding what went
wrong first. Moving to stretch shouldn't be a problem, but the issue of
elegantly supporting different suites remains nonetheless.
With kind regards,
Baurzhan.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2] remove RaspberryPi support
2019-02-12 11:39 ` Baurzhan Ismagulov
@ 2019-02-12 12:41 ` Claudius Heine
2019-02-12 16:40 ` Baurzhan Ismagulov
0 siblings, 1 reply; 17+ messages in thread
From: Claudius Heine @ 2019-02-12 12:41 UTC (permalink / raw)
To: isar-users
Hi Baurzhan,
On 12/02/2019 12.39, Baurzhan Ismagulov wrote:
> On Tue, Feb 12, 2019 at 10:30:36AM +0100, claudius.heine.ext@siemens.com wrote:
>> RaspberryPi is removed from meta-isar, because
>> - there currently no maintainers for it
>> - there is no automated boot test for it
>> - forces burden on rest of isar to support jessie
>> - very old board, most users should have moved on to RPi 2 or 3
>>
>> If those points change, support for it can be readded.
>
> - There is a maintaner (the process has to be improved)
Well the issue to update rpi to stretch in gh is open for 1.5 years.
> - Testing doesn't have to be automated (automation desired mid- to long-term)
> - There is value in supporting old boards as long as it is reasonable
> - I think we should strive for evolution and not discrete add-remove jumps
>
> The burden issue demonstrates one of the fundamental ideas behind Isar. After
> some time, people end up building for different suites. Many people who release
> stretch today will build for stretch and buster tomorrow. Maybe now is the time
> to make pluggable mechanisms for different suites. Without satisfying that
> need, Isar won't be serving people in the long run, IMHO.
No. IMO you should use an old version of isar for old stuff. Trying to
be backwards compatible as long as possible it not something isar<1.0
should try to do anyway, but I would argue that isar>1.0 should also
restrict.
Isar breaks the layer interface currently to often that it does not make
any sense to be coy about breaking board support if necessary.
> Regarding rpi1, I'd be reluctant to remove without understanding what went
> wrong first. Moving to stretch shouldn't be a problem, but the issue of
> elegantly supporting different suites remains nonetheless.
Great if updating rpi to stretch is not a problem, then this patch is
not needed!
Well my intention for the removal patch was, that it will take about a
week before it is merged and if raspberry pi is updated to stretch
before that, then this patch is no longer needed.
I submitted this revision of the patch after I saw that the issue to
upgrade rpi to stretch is now 1.5 years old. And I really don't want to
wait such periods until we can drop jessie support. I hope you understand.
regards,
Claudius
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-54 Fax: (+49)-8142-66989-80 Email: ch@denx.de
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2] remove RaspberryPi support
2019-02-12 12:41 ` Claudius Heine
@ 2019-02-12 16:40 ` Baurzhan Ismagulov
2019-02-12 16:49 ` Claudius Heine
0 siblings, 1 reply; 17+ messages in thread
From: Baurzhan Ismagulov @ 2019-02-12 16:40 UTC (permalink / raw)
To: isar-users
On Tue, Feb 12, 2019 at 01:41:11PM +0100, Claudius Heine wrote:
> Well the issue to update rpi to stretch in gh is open for 1.5 years.
Testing non-Debian and oldstable has value.
Meanwhile, I've bisected the problem to ee5518c Fix all shell-script
expansions. Any idea what could have gone wrong?
With kind regards,
Baurzhan.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2] remove RaspberryPi support
2019-02-12 16:40 ` Baurzhan Ismagulov
@ 2019-02-12 16:49 ` Claudius Heine
2019-02-17 10:16 ` Baurzhan Ismagulov
0 siblings, 1 reply; 17+ messages in thread
From: Claudius Heine @ 2019-02-12 16:49 UTC (permalink / raw)
To: isar-users, Harald Seiler
Hi,
On 12/02/2019 17.40, Baurzhan Ismagulov wrote:
> On Tue, Feb 12, 2019 at 01:41:11PM +0100, Claudius Heine wrote:
>> Well the issue to update rpi to stretch in gh is open for 1.5 years.
>
> Testing non-Debian and oldstable has value.
>
> Meanwhile, I've bisected the problem to ee5518c Fix all shell-script
> expansions. Any idea what could have gone wrong?
meta-isar/conf/distro/raspbian-configscript.sh:
-KERNEL_IMAGE=`ls /boot | grep vmlinuz`
+KERNEL_IMAGE="$(find /boot -maxdepth 1 -name "vmlinuz*" -printf "%p\n")"
Well the difference here is that the first one results in
'vmlinuz-4.9.0-6-rpi' and the change results in '/boot/vmlinuz-4.9.0-6-rpi'
Correctly it should be:
KERNEL_IMAGE="$(find /boot -maxdepth 1 -name "vmlinuz*" -printf "%P\n")"
(notice the big P instead of the p in the format string)
Cheers,
Claudius
>
> With kind regards,
> Baurzhan.
>
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-54 Fax: (+49)-8142-66989-80 Email: ch@denx.de
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH v2] remove RaspberryPi support
2019-02-12 16:49 ` Claudius Heine
@ 2019-02-17 10:16 ` Baurzhan Ismagulov
0 siblings, 0 replies; 17+ messages in thread
From: Baurzhan Ismagulov @ 2019-02-17 10:16 UTC (permalink / raw)
To: isar-users
On Tue, Feb 12, 2019 at 05:49:27PM +0100, Claudius Heine wrote:
> meta-isar/conf/distro/raspbian-configscript.sh:
...
> KERNEL_IMAGE="$(find /boot -maxdepth 1 -name "vmlinuz*" -printf "%P\n")"
Thanks much, this works!
With kind regards,
Baurzhan.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Discussion] Deprecating Raspberry Pi
2019-02-11 12:41 [Discussion] Deprecating Raspberry Pi Claudius Heine
` (2 preceding siblings ...)
2019-02-11 14:03 ` [Discussion] Deprecating Raspberry Pi Baurzhan Ismagulov
@ 2019-02-17 10:44 ` Baurzhan Ismagulov
2019-02-18 8:44 ` Claudius Heine
3 siblings, 1 reply; 17+ messages in thread
From: Baurzhan Ismagulov @ 2019-02-17 10:44 UTC (permalink / raw)
To: isar-users
On Mon, Feb 11, 2019 at 01:41:19PM +0100, Claudius Heine wrote:
> Currently RPi support with jessie is holding us back to deprecate jessie and
> removing the loop mounts that is required by the old versions of mkfs.ext4.
And what would you like to replace them with?
With kind regards,
Baurzhan.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [Discussion] Deprecating Raspberry Pi
2019-02-17 10:44 ` Baurzhan Ismagulov
@ 2019-02-18 8:44 ` Claudius Heine
0 siblings, 0 replies; 17+ messages in thread
From: Claudius Heine @ 2019-02-18 8:44 UTC (permalink / raw)
To: isar-users
Hi Baurzhan,
On 17/02/2019 11.44, Baurzhan Ismagulov wrote:
> On Mon, Feb 11, 2019 at 01:41:19PM +0100, Claudius Heine wrote:
>> Currently RPi support with jessie is holding us back to deprecate jessie and
>> removing the loop mounts that is required by the old versions of mkfs.ext4.
>
> And what would you like to replace them with?
Well, rpi-sdimg.bbclass should be replaced with wic. And
ext4-img.bbclass can use the new mkfs.ext4 where the '-d' parameter is
available.
regards,
Claudius
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-54 Fax: (+49)-8142-66989-80 Email: ch@denx.de
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2019-02-18 8:44 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-11 12:41 [Discussion] Deprecating Raspberry Pi Claudius Heine
2019-02-11 12:48 ` Jan Kiszka
2019-02-11 13:30 ` Claudius Heine
2019-02-11 13:51 ` [PATCH] remove raspberry support claudius.heine.ext
2019-02-11 14:03 ` Jan Kiszka
2019-02-12 9:30 ` [PATCH v2] remove RaspberryPi support claudius.heine.ext
2019-02-12 11:39 ` Baurzhan Ismagulov
2019-02-12 12:41 ` Claudius Heine
2019-02-12 16:40 ` Baurzhan Ismagulov
2019-02-12 16:49 ` Claudius Heine
2019-02-17 10:16 ` Baurzhan Ismagulov
2019-02-11 14:03 ` [Discussion] Deprecating Raspberry Pi Baurzhan Ismagulov
2019-02-11 14:11 ` Claudius Heine
2019-02-11 14:27 ` Baurzhan Ismagulov
2019-02-11 15:17 ` Claudius Heine
2019-02-17 10:44 ` Baurzhan Ismagulov
2019-02-18 8:44 ` Claudius Heine
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox