[PATCH v2 0/9] Update testsuite targets

[PATCH v2 0/9] Update testsuite targets

[Anton Mikanovich]

The most QEMU targets of CI are still Debian Stretch which was already
became oldoldstable. Meantime Debian Bullseye was not fully covered by
CI because it was protected by KFAIL and any errors were ignored. So we
need to move the most common CI targets from stretch to bullseye.

We also need to cover all existing machines by CI, so adding also some
new targets to full CI.

Building repro tests takes too much time during fast testing, so remove
it from fast and left only for full CI.

Also update real hardware targets to at least Debian Bullseye.

This patchset is placed on the top of
[PATCH v3] conf: add new debian version "bookworm"

---
Changes since v1:
- Remove container-amd64 SDK target update patch.

Anton Mikanovich (5):
  CI: Remove KFAIL for bullseye
  meta-isar: Add bullseye config for nand-ubi-demo
  CI: Cover RISC-V targets
  CI: Move qemu-stretch targets to bullseye
  CI: Remove repro from fast testing

Uladzimir Bely (4):
  meta-isar: Add bullseye config for de0-nano-soc
  meta-isar: Add bullseye config for bananapi
  meta-isar: Add bullseye config for nanopi-neo
  meta-isar: Add bullseye and bookworm configs for stm32mp15x

 meta-isar/conf/local.conf.sample              |  6 ++
 .../conf/multiconfig/bananapi-bullseye.conf   |  8 ++
 .../multiconfig/de0-nano-soc-bullseye.conf    |  8 ++
 .../multiconfig/nand-ubi-demo-bullseye.conf   | 14 ++++
 .../conf/multiconfig/nanopi-neo-bullseye.conf |  8 ++
 .../conf/multiconfig/stm32mp15x-bookworm.conf |  8 ++
 .../conf/multiconfig/stm32mp15x-bullseye.conf |  8 ++
 testsuite/build_test/build_test.py            | 73 +++++++------------
 testsuite/vm_boot_test/vm_boot_test.py        | 12 +--
 9 files changed, 94 insertions(+), 51 deletions(-)
 create mode 100644 meta-isar/conf/multiconfig/bananapi-bullseye.conf
 create mode 100644 meta-isar/conf/multiconfig/de0-nano-soc-bullseye.conf
 create mode 100644 meta-isar/conf/multiconfig/nand-ubi-demo-bullseye.conf
 create mode 100644 meta-isar/conf/multiconfig/nanopi-neo-bullseye.conf
 create mode 100644 meta-isar/conf/multiconfig/stm32mp15x-bookworm.conf
 create mode 100644 meta-isar/conf/multiconfig/stm32mp15x-bullseye.conf

-- 
2.25.1

[PATCH v2 1/9] CI: Remove KFAIL for bullseye

[Anton Mikanovich]

Debian bullseye was moved to stable, so any errors during its building
should be handled without skipping.

Signed-off-by: Anton Mikanovich <amikan@ilbers.de>
---
 testsuite/build_test/build_test.py | 32 +++++++-----------------------
 1 file changed, 7 insertions(+), 25 deletions(-)

diff --git a/testsuite/build_test/build_test.py b/testsuite/build_test/build_test.py
index b49a4cf..0e5b76a 100644
--- a/testsuite/build_test/build_test.py
+++ b/testsuite/build_test/build_test.py
@@ -62,6 +62,7 @@ class CrossTest(CIBaseTest):
         targets = [
             'mc:qemuarm-stretch:isar-image-base',
             'mc:qemuarm-buster:isar-image-base',
+            'mc:qemuarm-bullseye:isar-image-base',
             'mc:qemuarm64-stretch:isar-image-base',
             'mc:qemuamd64-stretch:isar-image-base',
             'mc:de0-nano-soc-buster:isar-image-base',
@@ -81,16 +82,6 @@ class CrossTest(CIBaseTest):
         except:
             self.cancel('KFAIL')
 
-    def test_cross_bullseye(self):
-        targets = [
-            'mc:qemuarm-bullseye:isar-image-base'
-                  ]
-
-        try:
-            self.perform_build_test(targets, 1, None)
-        except:
-            self.cancel('KFAIL')
-
     def test_cross_bookworm(self):
         targets = [
             'mc:qemuarm-bookworm:isar-image-base'
@@ -124,18 +115,24 @@ class NoCrossTest(CIBaseTest):
         targets = [
             'mc:qemuarm-stretch:isar-image-base',
             'mc:qemuarm-buster:isar-image-base',
+            'mc:qemuarm-bullseye:isar-image-base',
             'mc:qemuarm64-stretch:isar-image-base',
             'mc:qemui386-stretch:isar-image-base',
             'mc:qemui386-buster:isar-image-base',
+            'mc:qemui386-bullseye:isar-image-base',
             'mc:qemuamd64-stretch:isar-image-base',
             'mc:qemuamd64-buster:isar-image-base',
             'mc:qemuamd64-buster-tgz:isar-image-base',
             'mc:qemuamd64-buster-cpiogz:isar-image-base',
             'mc:qemuamd64-buster:isar-initramfs',
+            'mc:qemuamd64-bullseye:isar-image-base',
             'mc:qemumipsel-stretch:isar-image-base',
             'mc:qemumipsel-buster:isar-image-base',
+            'mc:qemumipsel-bullseye:isar-image-base',
             'mc:nand-ubi-demo-buster:isar-image-ubi',
             'mc:rpi-stretch:isar-image-base',
+            'mc:hikey-bullseye:isar-image-base',
+            'mc:virtualbox-bullseye:isar-image-base',
             'mc:qemuamd64-focal:isar-image-base'
                   ]
 
@@ -145,21 +142,6 @@ class NoCrossTest(CIBaseTest):
 
         self.perform_build_test(targets, 0, None)
 
-    def test_nocross_bullseye(self):
-        targets = [
-            'mc:qemuamd64-bullseye:isar-image-base',
-            'mc:qemuarm-bullseye:isar-image-base',
-            'mc:qemui386-bullseye:isar-image-base',
-            'mc:qemumipsel-bullseye:isar-image-base',
-            'mc:hikey-bullseye:isar-image-base',
-            'mc:virtualbox-bullseye:isar-image-base'
-                  ]
-
-        try:
-            self.perform_build_test(targets, 0, None)
-        except:
-            self.cancel('KFAIL')
-
     def test_nocross_bookworm(self):
         targets = [
             'mc:qemuamd64-bookworm:isar-image-base',
-- 
2.25.1

[PATCH v2 2/9] meta-isar: Add bullseye config for de0-nano-soc

[Anton Mikanovich]

From: Uladzimir Bely <ubely@ilbers.de>

Also, modify testsuite configuration to use new config.

Signed-off-by: Uladzimir Bely <ubely@ilbers.de>
Signed-off-by: Anton Mikanovich <amikan@ilbers.de>
---
 meta-isar/conf/local.conf.sample                      | 1 +
 meta-isar/conf/multiconfig/de0-nano-soc-bullseye.conf | 8 ++++++++
 testsuite/build_test/build_test.py                    | 6 +++---
 3 files changed, 12 insertions(+), 3 deletions(-)
 create mode 100644 meta-isar/conf/multiconfig/de0-nano-soc-bullseye.conf

diff --git a/meta-isar/conf/local.conf.sample b/meta-isar/conf/local.conf.sample
index fa2edcf..ab072c5 100644
--- a/meta-isar/conf/local.conf.sample
+++ b/meta-isar/conf/local.conf.sample
@@ -67,6 +67,7 @@ BBMULTICONFIG = " \
     qemuriscv64-sid-ports \
     bananapi-buster \
     de0-nano-soc-buster \
+    de0-nano-soc-bullseye \
     hikey-bullseye \
     hikey-bookworm \
     nand-ubi-demo-buster \
diff --git a/meta-isar/conf/multiconfig/de0-nano-soc-bullseye.conf b/meta-isar/conf/multiconfig/de0-nano-soc-bullseye.conf
new file mode 100644
index 0000000..4f603fe
--- /dev/null
+++ b/meta-isar/conf/multiconfig/de0-nano-soc-bullseye.conf
@@ -0,0 +1,8 @@
+# This software is a part of ISAR.
+# Copyright (c) Siemens AG, 2018-2020
+# Copyright (C) 2021 ilbers GmbH
+#
+# SPDX-License-Identifier: MIT
+
+MACHINE = "de0-nano-soc"
+DISTRO = "debian-bullseye"
diff --git a/testsuite/build_test/build_test.py b/testsuite/build_test/build_test.py
index 0e5b76a..be40d20 100644
--- a/testsuite/build_test/build_test.py
+++ b/testsuite/build_test/build_test.py
@@ -26,7 +26,7 @@ class ReproTest(CIBaseTest):
     """
     def test_repro_signed(self):
         targets = [
-            'mc:de0-nano-soc-buster:isar-image-base',
+            'mc:de0-nano-soc-bullseye:isar-image-base',
             'mc:qemuarm64-stretch:isar-image-base'
                   ]
 
@@ -48,7 +48,7 @@ class CcacheTest(CIBaseTest):
     :avocado: tags=ccache
     """
     def test_ccache_rebuild(self):
-        targets = ['mc:de0-nano-soc-buster:isar-image-base']
+        targets = ['mc:de0-nano-soc-bullseye:isar-image-base']
         self.perform_ccache_test(targets)
 
 class CrossTest(CIBaseTest):
@@ -65,7 +65,7 @@ class CrossTest(CIBaseTest):
             'mc:qemuarm-bullseye:isar-image-base',
             'mc:qemuarm64-stretch:isar-image-base',
             'mc:qemuamd64-stretch:isar-image-base',
-            'mc:de0-nano-soc-buster:isar-image-base',
+            'mc:de0-nano-soc-bullseye:isar-image-base',
             'mc:stm32mp15x-buster:isar-image-base',
             'mc:rpi-stretch:isar-image-base'
                   ]
-- 
2.25.1

[PATCH v2 3/9] meta-isar: Add bullseye config for bananapi

[Anton Mikanovich]

From: Uladzimir Bely <ubely@ilbers.de>

Also, modify testsuite configuration to use new config.

Signed-off-by: Uladzimir Bely <ubely@ilbers.de>
Signed-off-by: Anton Mikanovich <amikan@ilbers.de>
---
 meta-isar/conf/local.conf.sample                  | 1 +
 meta-isar/conf/multiconfig/bananapi-bullseye.conf | 8 ++++++++
 testsuite/build_test/build_test.py                | 1 +
 3 files changed, 10 insertions(+)
 create mode 100644 meta-isar/conf/multiconfig/bananapi-bullseye.conf

diff --git a/meta-isar/conf/local.conf.sample b/meta-isar/conf/local.conf.sample
index ab072c5..5a513f3 100644
--- a/meta-isar/conf/local.conf.sample
+++ b/meta-isar/conf/local.conf.sample
@@ -66,6 +66,7 @@ BBMULTICONFIG = " \
     qemumipsel-bookworm \
     qemuriscv64-sid-ports \
     bananapi-buster \
+    bananapi-bullseye \
     de0-nano-soc-buster \
     de0-nano-soc-bullseye \
     hikey-bullseye \
diff --git a/meta-isar/conf/multiconfig/bananapi-bullseye.conf b/meta-isar/conf/multiconfig/bananapi-bullseye.conf
new file mode 100644
index 0000000..e073468
--- /dev/null
+++ b/meta-isar/conf/multiconfig/bananapi-bullseye.conf
@@ -0,0 +1,8 @@
+# This software is a part of ISAR.
+# Copyright (c) Siemens AG, 2018
+# Copyright (C) 2021 ilbers GmbH
+#
+# SPDX-License-Identifier: MIT
+
+MACHINE = "bananapi"
+DISTRO = "debian-bullseye"
diff --git a/testsuite/build_test/build_test.py b/testsuite/build_test/build_test.py
index be40d20..56ca6a0 100644
--- a/testsuite/build_test/build_test.py
+++ b/testsuite/build_test/build_test.py
@@ -133,6 +133,7 @@ class NoCrossTest(CIBaseTest):
             'mc:rpi-stretch:isar-image-base',
             'mc:hikey-bullseye:isar-image-base',
             'mc:virtualbox-bullseye:isar-image-base',
+            'mc:bananapi-bullseye:isar-image-base',
             'mc:qemuamd64-focal:isar-image-base'
                   ]
 
-- 
2.25.1

[PATCH v2 4/9] meta-isar: Add bullseye config for nanopi-neo

[Anton Mikanovich]

From: Uladzimir Bely <ubely@ilbers.de>

Also, modify testsuite configuration to use new config.

Signed-off-by: Uladzimir Bely <ubely@ilbers.de>
Signed-off-by: Anton Mikanovich <amikan@ilbers.de>
---
 meta-isar/conf/local.conf.sample                    | 1 +
 meta-isar/conf/multiconfig/nanopi-neo-bullseye.conf | 8 ++++++++
 testsuite/build_test/build_test.py                  | 1 +
 3 files changed, 10 insertions(+)
 create mode 100644 meta-isar/conf/multiconfig/nanopi-neo-bullseye.conf

diff --git a/meta-isar/conf/local.conf.sample b/meta-isar/conf/local.conf.sample
index 5a513f3..4f6b14d 100644
--- a/meta-isar/conf/local.conf.sample
+++ b/meta-isar/conf/local.conf.sample
@@ -73,6 +73,7 @@ BBMULTICONFIG = " \
     hikey-bookworm \
     nand-ubi-demo-buster \
     nanopi-neo-buster \
+    nanopi-neo-bullseye \
     stm32mp15x-buster \
     virtualbox-bullseye \
     rpi-stretch \
diff --git a/meta-isar/conf/multiconfig/nanopi-neo-bullseye.conf b/meta-isar/conf/multiconfig/nanopi-neo-bullseye.conf
new file mode 100644
index 0000000..d8ed028
--- /dev/null
+++ b/meta-isar/conf/multiconfig/nanopi-neo-bullseye.conf
@@ -0,0 +1,8 @@
+# This software is a part of ISAR.
+# Copyright (c) Mentor, a Siemens business, 2020
+# Copyright (C) 2021 ilbers GmbH
+#
+# SPDX-License-Identifier: MIT
+
+MACHINE = "nanopi-neo"
+DISTRO = "debian-bullseye"
diff --git a/testsuite/build_test/build_test.py b/testsuite/build_test/build_test.py
index 56ca6a0..d17e4fb 100644
--- a/testsuite/build_test/build_test.py
+++ b/testsuite/build_test/build_test.py
@@ -134,6 +134,7 @@ class NoCrossTest(CIBaseTest):
             'mc:hikey-bullseye:isar-image-base',
             'mc:virtualbox-bullseye:isar-image-base',
             'mc:bananapi-bullseye:isar-image-base',
+            'mc:nanopi-neo-bullseye:isar-image-base',
             'mc:qemuamd64-focal:isar-image-base'
                   ]
 
-- 
2.25.1

[PATCH v2 5/9] meta-isar: Add bullseye and bookworm configs for stm32mp15x

[Anton Mikanovich]

From: Uladzimir Bely <ubely@ilbers.de>

Also, modify testsuite configuration to use new configs.

Signed-off-by: Uladzimir Bely <ubely@ilbers.de>
Signed-off-by: Anton Mikanovich <amikan@ilbers.de>
---
 meta-isar/conf/local.conf.sample                    | 2 ++
 meta-isar/conf/multiconfig/stm32mp15x-bookworm.conf | 8 ++++++++
 meta-isar/conf/multiconfig/stm32mp15x-bullseye.conf | 8 ++++++++
 testsuite/build_test/build_test.py                  | 2 ++
 4 files changed, 20 insertions(+)
 create mode 100644 meta-isar/conf/multiconfig/stm32mp15x-bookworm.conf
 create mode 100644 meta-isar/conf/multiconfig/stm32mp15x-bullseye.conf

diff --git a/meta-isar/conf/local.conf.sample b/meta-isar/conf/local.conf.sample
index 4f6b14d..061a85f 100644
--- a/meta-isar/conf/local.conf.sample
+++ b/meta-isar/conf/local.conf.sample
@@ -75,6 +75,8 @@ BBMULTICONFIG = " \
     nanopi-neo-buster \
     nanopi-neo-bullseye \
     stm32mp15x-buster \
+    stm32mp15x-bullseye \
+    stm32mp15x-bookworm \
     virtualbox-bullseye \
     rpi-stretch \
     sifive-fu540-sid-ports \
diff --git a/meta-isar/conf/multiconfig/stm32mp15x-bookworm.conf b/meta-isar/conf/multiconfig/stm32mp15x-bookworm.conf
new file mode 100644
index 0000000..0f61eef
--- /dev/null
+++ b/meta-isar/conf/multiconfig/stm32mp15x-bookworm.conf
@@ -0,0 +1,8 @@
+# This software is a part of ISAR.
+# Copyright (c) Siemens AG, 2020
+# Copyright (C) 2021 ilbers GmbH
+#
+# SPDX-License-Identifier: MIT
+
+MACHINE = "stm32mp15x"
+DISTRO = "debian-bookworm"
diff --git a/meta-isar/conf/multiconfig/stm32mp15x-bullseye.conf b/meta-isar/conf/multiconfig/stm32mp15x-bullseye.conf
new file mode 100644
index 0000000..ada054e
--- /dev/null
+++ b/meta-isar/conf/multiconfig/stm32mp15x-bullseye.conf
@@ -0,0 +1,8 @@
+# This software is a part of ISAR.
+# Copyright (c) Siemens AG, 2020
+# Copyright (C) 2021 ilbers GmbH
+#
+# SPDX-License-Identifier: MIT
+
+MACHINE = "stm32mp15x"
+DISTRO = "debian-bullseye"
diff --git a/testsuite/build_test/build_test.py b/testsuite/build_test/build_test.py
index d17e4fb..d816de2 100644
--- a/testsuite/build_test/build_test.py
+++ b/testsuite/build_test/build_test.py
@@ -135,6 +135,7 @@ class NoCrossTest(CIBaseTest):
             'mc:virtualbox-bullseye:isar-image-base',
             'mc:bananapi-bullseye:isar-image-base',
             'mc:nanopi-neo-bullseye:isar-image-base',
+            'mc:stm32mp15x-bullseye:isar-image-base',
             'mc:qemuamd64-focal:isar-image-base'
                   ]
 
@@ -150,6 +151,7 @@ class NoCrossTest(CIBaseTest):
             'mc:qemuarm-bookworm:isar-image-base',
             'mc:qemui386-bookworm:isar-image-base',
             'mc:qemumipsel-bookworm:isar-image-base',
+            'mc:stm32mp15x-bookworm:isar-image-base',
             'mc:hikey-bookworm:isar-image-base'
                   ]
 
-- 
2.25.1

[PATCH v2 6/9] meta-isar: Add bullseye config for nand-ubi-demo

[Anton Mikanovich]

Also, modify testsuite configuration to use new config.

Signed-off-by: Anton Mikanovich <amikan@ilbers.de>
---
 meta-isar/conf/local.conf.sample                   |  1 +
 .../conf/multiconfig/nand-ubi-demo-bullseye.conf   | 14 ++++++++++++++
 testsuite/build_test/build_test.py                 |  2 +-
 3 files changed, 16 insertions(+), 1 deletion(-)
 create mode 100644 meta-isar/conf/multiconfig/nand-ubi-demo-bullseye.conf

diff --git a/meta-isar/conf/local.conf.sample b/meta-isar/conf/local.conf.sample
index 061a85f..a5b5b35 100644
--- a/meta-isar/conf/local.conf.sample
+++ b/meta-isar/conf/local.conf.sample
@@ -72,6 +72,7 @@ BBMULTICONFIG = " \
     hikey-bullseye \
     hikey-bookworm \
     nand-ubi-demo-buster \
+    nand-ubi-demo-bullseye \
     nanopi-neo-buster \
     nanopi-neo-bullseye \
     stm32mp15x-buster \
diff --git a/meta-isar/conf/multiconfig/nand-ubi-demo-bullseye.conf b/meta-isar/conf/multiconfig/nand-ubi-demo-bullseye.conf
new file mode 100644
index 0000000..f5d02e0
--- /dev/null
+++ b/meta-isar/conf/multiconfig/nand-ubi-demo-bullseye.conf
@@ -0,0 +1,14 @@
+# This software is a part of ISAR.
+# Copyright (C) Siemens AG, 2019
+# Copyright (C) 2021 ilbers GmbH
+#
+# SPDX-License-Identifier: MIT
+
+MACHINE ?= "nand-ubi-demo"
+
+DISTRO ?= "debian-bullseye"
+DISTRO_ARCH ?= "armhf"
+
+KERNEL_NAME ?= "armmp"
+
+IMAGE_INSTALL += "sshd-regen-keys"
diff --git a/testsuite/build_test/build_test.py b/testsuite/build_test/build_test.py
index d816de2..1497a61 100644
--- a/testsuite/build_test/build_test.py
+++ b/testsuite/build_test/build_test.py
@@ -129,7 +129,7 @@ class NoCrossTest(CIBaseTest):
             'mc:qemumipsel-stretch:isar-image-base',
             'mc:qemumipsel-buster:isar-image-base',
             'mc:qemumipsel-bullseye:isar-image-base',
-            'mc:nand-ubi-demo-buster:isar-image-ubi',
+            'mc:nand-ubi-demo-bullseye:isar-image-ubi',
             'mc:rpi-stretch:isar-image-base',
             'mc:hikey-bullseye:isar-image-base',
             'mc:virtualbox-bullseye:isar-image-base',
-- 
2.25.1

[PATCH v2 7/9] CI: Cover RISC-V targets

[Anton Mikanovich]

Add qemuriscv64 and sifive-fu540 targets to CI build for RISC-V arch
and Debian Sid Ports support testing.

Signed-off-by: Anton Mikanovich <amikan@ilbers.de>
---
 testsuite/build_test/build_test.py | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/testsuite/build_test/build_test.py b/testsuite/build_test/build_test.py
index 1497a61..5bc9ed0 100644
--- a/testsuite/build_test/build_test.py
+++ b/testsuite/build_test/build_test.py
@@ -129,6 +129,8 @@ class NoCrossTest(CIBaseTest):
             'mc:qemumipsel-stretch:isar-image-base',
             'mc:qemumipsel-buster:isar-image-base',
             'mc:qemumipsel-bullseye:isar-image-base',
+            'mc:qemuriscv64-sid-ports:isar-image-base',
+            'mc:sifive-fu540-sid-ports:isar-image-base',
             'mc:nand-ubi-demo-bullseye:isar-image-ubi',
             'mc:rpi-stretch:isar-image-base',
             'mc:hikey-bullseye:isar-image-base',
-- 
2.25.1

[PATCH v2 8/9] CI: Move qemu-stretch targets to bullseye

[Anton Mikanovich]

Update common test targets from oldoldstable stretch to the current
stable bullseye.

Left qemui386-stretch for backward compatibility testing.

Signed-off-by: Anton Mikanovich <amikan@ilbers.de>
---
 testsuite/build_test/build_test.py     | 25 ++++++++++---------------
 testsuite/vm_boot_test/vm_boot_test.py | 12 ++++++------
 2 files changed, 16 insertions(+), 21 deletions(-)

diff --git a/testsuite/build_test/build_test.py b/testsuite/build_test/build_test.py
index 5bc9ed0..481df01 100644
--- a/testsuite/build_test/build_test.py
+++ b/testsuite/build_test/build_test.py
@@ -27,15 +27,15 @@ class ReproTest(CIBaseTest):
     def test_repro_signed(self):
         targets = [
             'mc:de0-nano-soc-bullseye:isar-image-base',
-            'mc:qemuarm64-stretch:isar-image-base'
+            'mc:qemuarm64-bullseye:isar-image-base'
                   ]
 
         self.perform_repro_test(targets, 1)
 
     def test_repro_unsigned(self):
         targets = [
-            'mc:qemuamd64-stretch:isar-image-base',
-            'mc:qemuarm-stretch:isar-image-base'
+            'mc:qemuamd64-bullseye:isar-image-base',
+            'mc:qemuarm-bullseye:isar-image-base'
                   ]
 
         self.perform_repro_test(targets, 0)
@@ -60,11 +60,9 @@ class CrossTest(CIBaseTest):
     """
     def test_cross(self):
         targets = [
-            'mc:qemuarm-stretch:isar-image-base',
             'mc:qemuarm-buster:isar-image-base',
             'mc:qemuarm-bullseye:isar-image-base',
-            'mc:qemuarm64-stretch:isar-image-base',
-            'mc:qemuamd64-stretch:isar-image-base',
+            'mc:qemuarm64-bullseye:isar-image-base',
             'mc:de0-nano-soc-bullseye:isar-image-base',
             'mc:stm32mp15x-buster:isar-image-base',
             'mc:rpi-stretch:isar-image-base'
@@ -100,7 +98,7 @@ class SdkTest(CIBaseTest):
     :avocado: tags=sdk,fast,full
     """
     def test_sdk(self):
-        targets = ['mc:qemuarm-stretch:isar-image-base']
+        targets = ['mc:qemuarm-bullseye:isar-image-base']
 
         self.perform_build_test(targets, 1, 'do_populate_sdk')
 
@@ -113,20 +111,17 @@ class NoCrossTest(CIBaseTest):
     """
     def test_nocross(self):
         targets = [
-            'mc:qemuarm-stretch:isar-image-base',
             'mc:qemuarm-buster:isar-image-base',
             'mc:qemuarm-bullseye:isar-image-base',
-            'mc:qemuarm64-stretch:isar-image-base',
+            'mc:qemuarm64-bullseye:isar-image-base',
             'mc:qemui386-stretch:isar-image-base',
             'mc:qemui386-buster:isar-image-base',
             'mc:qemui386-bullseye:isar-image-base',
-            'mc:qemuamd64-stretch:isar-image-base',
             'mc:qemuamd64-buster:isar-image-base',
-            'mc:qemuamd64-buster-tgz:isar-image-base',
-            'mc:qemuamd64-buster-cpiogz:isar-image-base',
-            'mc:qemuamd64-buster:isar-initramfs',
             'mc:qemuamd64-bullseye:isar-image-base',
-            'mc:qemumipsel-stretch:isar-image-base',
+            'mc:qemuamd64-bullseye-tgz:isar-image-base',
+            'mc:qemuamd64-bullseye-cpiogz:isar-image-base',
+            'mc:qemuamd64-bullseye:isar-initramfs',
             'mc:qemumipsel-buster:isar-image-base',
             'mc:qemumipsel-bullseye:isar-image-base',
             'mc:qemuriscv64-sid-ports:isar-image-base',
@@ -181,7 +176,7 @@ class RebuildTest(CIBaseTest):
             file.write('do_fetch_append() {\n\n}')
 
         try:
-            self.perform_build_test('mc:qemuamd64-stretch:isar-image-base',
+            self.perform_build_test('mc:qemuamd64-bullseye:isar-image-base',
                                     is_cross_build, None)
         finally:
             self.restorefile(dpkgbase_file)
diff --git a/testsuite/vm_boot_test/vm_boot_test.py b/testsuite/vm_boot_test/vm_boot_test.py
index 01623c5..d609d32 100644
--- a/testsuite/vm_boot_test/vm_boot_test.py
+++ b/testsuite/vm_boot_test/vm_boot_test.py
@@ -100,17 +100,17 @@ class VmBootTestFast(VmBase):
 
     :avocado: tags=fast,full
     """
-    def test_arm_stretch(self):
-        self.vm_start('arm','stretch')
+    def test_arm_bullseye(self):
+        self.vm_start('arm','bullseye')
 
     def test_arm_buster(self):
         self.vm_start('arm','buster')
 
-    def test_arm64_stretch(self):
-        self.vm_start('arm64','stretch')
+    def test_arm64_bullseye(self):
+        self.vm_start('arm64','bullseye')
 
-    def test_amd64_stretch(self):
-        self.vm_start('amd64','stretch')
+    def test_amd64_bullseye(self):
+        self.vm_start('amd64','bullseye')
 
 class VmBootTestFull(VmBase):
 
-- 
2.25.1

[PATCH v2 9/9] CI: Remove repro from fast testing

[Anton Mikanovich]

Remove repro test from `fast` to make it little more fast.

Signed-off-by: Anton Mikanovich <amikan@ilbers.de>
---
 testsuite/build_test/build_test.py | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/testsuite/build_test/build_test.py b/testsuite/build_test/build_test.py
index 481df01..d3dfd51 100644
--- a/testsuite/build_test/build_test.py
+++ b/testsuite/build_test/build_test.py
@@ -22,7 +22,7 @@ class ReproTest(CIBaseTest):
     """
     Test cached base repository
 
-    :avocado: tags=repro,fast,full
+    :avocado: tags=repro,full
     """
     def test_repro_signed(self):
         targets = [
-- 
2.25.1