[PATCH v2] fix premature success dialog in installer script

[PATCH v2] fix premature success dialog in installer script

['Kasturi Shekar' via isar-users]

The 'Installation successful' message was displayed before the
progress bar completed. Fixed by tracking the dialog --gauge PID
and terminating it after bmaptool finishes. This ensures
the progress bar runs to 100% before showing the final message.

Changes:
- Tracked the PID of the dialog --gauge process.
- Killed gauge process after bmaptool completed.
- Ensured success message is shown only after the progress bar ends.

Signed-off-by: Kasturi Shekar <kasturi.shekar@siemens.com>
---
 .../deploy-image/files/usr/bin/deploy-image-wic.sh            | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh b/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh
index aba81c84..fa1061c1 100755
--- a/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh
+++ b/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh
@@ -183,12 +183,16 @@ if version_ge "$bmap_version" "3.6"; then
         done
     ) | dialog --gauge "Flashing image, please wait..." 10 70 0 &
 
+    gauge_pid=$!
 fi
 
 if ! bmaptool ${quiet_flag} copy ${bmap_options} "$installer_image_uri" "${installer_target_dev}"; then
+    kill "$gauge_pid"
     exit 1
 fi
 
+kill "$gauge_pid" 2>/dev/null
+
 if ! $installer_unattended; then
     dialog --title "Reboot" \
            --msgbox "Installation was successful. System will be rebooted. Please remove the USB stick." 6 60
-- 
2.39.5

-- 
You received this message because you are subscribed to the Google Groups "isar-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/isar-users/20250806055438.3318548-1-kasturi.shekar%40siemens.com.

Re: [PATCH v2] fix premature success dialog in installer script

['MOESSBAUER, Felix' via isar-users]

On Wed, 2025-08-06 at 11:24 +0530, 'Kasturi Shekar' via isar-users
wrote:
> The 'Installation successful' message was displayed before the
> progress bar completed. Fixed by tracking the dialog --gauge PID
> and terminating it after bmaptool finishes. This ensures
> the progress bar runs to 100% before showing the final message.

Hi,

I'm still wondering how that could happen. The bmaptool is the command
that needs to terminate before showing the next message. How does the
killing of the gauge help here?

> 
> Changes:
> - Tracked the PID of the dialog --gauge process.
> - Killed gauge process after bmaptool completed.
> - Ensured success message is shown only after the progress bar ends.
> 
> Signed-off-by: Kasturi Shekar <kasturi.shekar@siemens.com>
> ---
>  .../deploy-image/files/usr/bin/deploy-image-wic.sh            | 4
> ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/meta-isar/recipes-installer/deploy-
> image/files/usr/bin/deploy-image-wic.sh b/meta-isar/recipes-
> installer/deploy-image/files/usr/bin/deploy-image-wic.sh
> index aba81c84..fa1061c1 100755
> --- a/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-
> image-wic.sh
> +++ b/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-
> image-wic.sh
> @@ -183,12 +183,16 @@ if version_ge "$bmap_version" "3.6"; then
>          done
>      ) | dialog --gauge "Flashing image, please wait..." 10 70 0 &
>  
> +    gauge_pid=$!
>  fi
>  
>  if ! bmaptool ${quiet_flag} copy ${bmap_options}
> "$installer_image_uri" "${installer_target_dev}"; then
> +    kill "$gauge_pid"
>      exit 1

As we exit anyways, why do we need to kill the gauge?
Isn't it reaped when leaving the script?

>  fi
>  
> +kill "$gauge_pid" 2>/dev/null

Why do we need to ignore errors here?

PS: This script could need some shellcheck improvements.

Felix

> +
>  if ! $installer_unattended; then
>      dialog --title "Reboot" \
>             --msgbox "Installation was successful. System will be
> rebooted. Please remove the USB stick." 6 60
> -- 
> 2.39.5

-- 
Siemens AG
Linux Expert Center
Friedrich-Ludwig-Bauer-Str. 3
85748 Garching, Germany

-- 
You received this message because you are subscribed to the Google Groups "isar-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/isar-users/2e4e30c3201877ab4e9f8eee12e128d95e2db936.camel%40siemens.com.

RE: [PATCH v2] fix premature success dialog in installer script

['Shekar, Kasturi' via isar-users]

Hi,

The gauge runs in a separate background process and reads from a named pipe.
Even after bmap tool finishes, the read loop can remain active, causing the gauge to overlap with the success dialog. Explicitly killing the gauge ensures it terminates cleanly before the next message is shown.

Thanks

> -----Original Message-----
> From: Moessbauer, Felix (FT RPD CED OES-DE)
> <felix.moessbauer@siemens.com>
> Sent: 06 August 2025 12:59
> To: Shekar, Kasturi (FT FDS CES LX PBU 2) <kasturi.shekar@siemens.com>;
> isar-users@googlegroups.com
> Subject: Re: [PATCH v2] fix premature success dialog in installer script
> 
> On Wed, 2025-08-06 at 11:24 +0530, 'Kasturi Shekar' via isar-users
> wrote:
> > The 'Installation successful' message was displayed before the
> > progress bar completed. Fixed by tracking the dialog --gauge PID and
> > terminating it after bmaptool finishes. This ensures the progress bar
> > runs to 100% before showing the final message.
> 
> Hi,
> 
> I'm still wondering how that could happen. The bmaptool is the command
> that needs to terminate before showing the next message. How does the
> killing of the gauge help here?
> 
> >
> > Changes:
> > - Tracked the PID of the dialog --gauge process.
> > - Killed gauge process after bmaptool completed.
> > - Ensured success message is shown only after the progress bar ends.
> >
> > Signed-off-by: Kasturi Shekar <kasturi.shekar@siemens.com>
> > ---
> >  .../deploy-image/files/usr/bin/deploy-image-wic.sh            | 4
> > ++++
> >  1 file changed, 4 insertions(+)
> >
> > diff --git a/meta-isar/recipes-installer/deploy-
> > image/files/usr/bin/deploy-image-wic.sh b/meta-isar/recipes-
> > installer/deploy-image/files/usr/bin/deploy-image-wic.sh
> > index aba81c84..fa1061c1 100755
> > --- a/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-
> > image-wic.sh
> > +++ b/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-
> > image-wic.sh
> > @@ -183,12 +183,16 @@ if version_ge "$bmap_version" "3.6"; then
> >          done
> >      ) | dialog --gauge "Flashing image, please wait..." 10 70 0 &
> >
> > +    gauge_pid=$!
> >  fi
> >
> >  if ! bmaptool ${quiet_flag} copy ${bmap_options}
> > "$installer_image_uri" "${installer_target_dev}"; then
> > +    kill "$gauge_pid"
> >      exit 1
> 
> As we exit anyways, why do we need to kill the gauge?
> Isn't it reaped when leaving the script?
> 
> >  fi
> >
> > +kill "$gauge_pid" 2>/dev/null
> 
> Why do we need to ignore errors here?
> 
> PS: This script could need some shellcheck improvements.
> 
> Felix
> 
> > +
> >  if ! $installer_unattended; then
> >      dialog --title "Reboot" \
> >             --msgbox "Installation was successful. System will be
> > rebooted. Please remove the USB stick." 6 60
> > --
> > 2.39.5
> 
> --
> Siemens AG
> Linux Expert Center
> Friedrich-Ludwig-Bauer-Str. 3
> 85748 Garching, Germany

-- 
You received this message because you are subscribed to the Google Groups "isar-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/isar-users/SG2PR06MB5311E0DFAF4AAB6A6FAB1B70942DA%40SG2PR06MB5311.apcprd06.prod.outlook.com.

RE: [PATCH v2] fix premature success dialog in installer script

['Shekar, Kasturi' via isar-users]

`2>/dev/null` is just to suppress harmless kill errors on UI if the gauge wasn’t started or has already exited. Otherwise, users would see “No such process” messages during normal runs.

I agree that the script could benefit from some ShellCheck cleanups. I can work on running it through ShellCheck and submit a follow‑up patch.

Thanks,
Kasturi

> -----Original Message-----
> From: Moessbauer, Felix (FT RPD CED OES-DE)
> <felix.moessbauer@siemens.com>
> Sent: 06 August 2025 12:59
> To: Shekar, Kasturi (FT FDS CES LX PBU 2) <kasturi.shekar@siemens.com>;
> isar-users@googlegroups.com
> Subject: Re: [PATCH v2] fix premature success dialog in installer script
> 
> On Wed, 2025-08-06 at 11:24 +0530, 'Kasturi Shekar' via isar-users
> wrote:
> > The 'Installation successful' message was displayed before the
> > progress bar completed. Fixed by tracking the dialog --gauge PID and
> > terminating it after bmaptool finishes. This ensures the progress bar
> > runs to 100% before showing the final message.
> 
> Hi,
> 
> I'm still wondering how that could happen. The bmaptool is the command
> that needs to terminate before showing the next message. How does the
> killing of the gauge help here?
> 
> >
> > Changes:
> > - Tracked the PID of the dialog --gauge process.
> > - Killed gauge process after bmaptool completed.
> > - Ensured success message is shown only after the progress bar ends.
> >
> > Signed-off-by: Kasturi Shekar <kasturi.shekar@siemens.com>
> > ---
> >  .../deploy-image/files/usr/bin/deploy-image-wic.sh            | 4
> > ++++
> >  1 file changed, 4 insertions(+)
> >
> > diff --git a/meta-isar/recipes-installer/deploy-
> > image/files/usr/bin/deploy-image-wic.sh b/meta-isar/recipes-
> > installer/deploy-image/files/usr/bin/deploy-image-wic.sh
> > index aba81c84..fa1061c1 100755
> > --- a/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-
> > image-wic.sh
> > +++ b/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-
> > image-wic.sh
> > @@ -183,12 +183,16 @@ if version_ge "$bmap_version" "3.6"; then
> >          done
> >      ) | dialog --gauge "Flashing image, please wait..." 10 70 0 &
> >
> > +    gauge_pid=$!
> >  fi
> >
> >  if ! bmaptool ${quiet_flag} copy ${bmap_options}
> > "$installer_image_uri" "${installer_target_dev}"; then
> > +    kill "$gauge_pid"
> >      exit 1
> 
> As we exit anyways, why do we need to kill the gauge?
> Isn't it reaped when leaving the script?
> 
> >  fi
> >
> > +kill "$gauge_pid" 2>/dev/null
> 
> Why do we need to ignore errors here?
> 
> PS: This script could need some shellcheck improvements.
> 
> Felix
> 
> > +
> >  if ! $installer_unattended; then
> >      dialog --title "Reboot" \
> >             --msgbox "Installation was successful. System will be
> > rebooted. Please remove the USB stick." 6 60
> > --
> > 2.39.5
> 
> --
> Siemens AG
> Linux Expert Center
> Friedrich-Ludwig-Bauer-Str. 3
> 85748 Garching, Germany

-- 
You received this message because you are subscribed to the Google Groups "isar-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/isar-users/SG2PR06MB5311FBB54D40ACD6E98DD9A8942DA%40SG2PR06MB5311.apcprd06.prod.outlook.com.

[PATCH 1/2 v3] fix premature success dialog in installer script

['Kasturi Shekar' via isar-users]

The 'Installation successful' message was displayed before the
progress bar completed. Fixed by tracking the dialog --gauge PID
and terminating it after bmaptool finishes. This ensures
the progress bar runs to 100% before showing the final message.

Changes:
- Tracked the PID of the dialog --gauge process.
- Killed gauge process after bmaptool completed.
- Ensured success message is shown only after the progress bar ends.

Signed-off-by: Kasturi Shekar <kasturi.shekar@siemens.com>
---
 .../deploy-image/files/usr/bin/deploy-image-wic.sh            | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh b/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh
index aba81c84..fa1061c1 100755
--- a/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh
+++ b/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh
@@ -183,12 +183,16 @@ if version_ge "$bmap_version" "3.6"; then
         done
     ) | dialog --gauge "Flashing image, please wait..." 10 70 0 &
 
+    gauge_pid=$!
 fi
 
 if ! bmaptool ${quiet_flag} copy ${bmap_options} "$installer_image_uri" "${installer_target_dev}"; then
+    kill "$gauge_pid"
     exit 1
 fi
 
+kill "$gauge_pid" 2>/dev/null
+
 if ! $installer_unattended; then
     dialog --title "Reboot" \
            --msgbox "Installation was successful. System will be rebooted. Please remove the USB stick." 6 60
-- 
2.39.5

-- 
You received this message because you are subscribed to the Google Groups "isar-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/isar-users/20250820093417.41825-1-kasturi.shekar%40siemens.com.

[PATCH 2/2] deploy-image-wic.sh: fix shellcheck warnings

['Kasturi Shekar' via isar-users]

No functional changes, only style and readability fixes
without altering runtime behavior

Signed-off-by: Kasturi Shekar <kasturi.shekar@siemens.com>
---
 .../deploy-image/files/usr/bin/deploy-image-wic.sh    | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh b/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh
index fa1061c1..e21da8e2 100755
--- a/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh
+++ b/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh
@@ -8,8 +8,7 @@ installdata=${INSTALL_DATA:-/install}
 
 SCRIPT_DIR=$( dirname -- "$( readlink -f -- "$0"; )"; )
 
-. ${SCRIPT_DIR}/../lib/deploy-image-wic/handle-config.sh
-
+. "${SCRIPT_DIR}/../lib/deploy-image-wic/handle-config.sh"
 
 if ! $installer_unattended; then
     installer_image_uri=$(find "$installdata" -type f -iname "*.wic*" -a -not -iname "*.wic.bmap" -exec basename {} \;)
@@ -37,7 +36,7 @@ if ! $installer_unattended; then
     # inspired by poky/meta/recipes-core/initrdscripts/files/install-efi.sh
     target_device_list=""
     current_root_dev_type=$(findmnt / -o fstype -n)
-    if [ ${current_root_dev_type} = "nfs" ]; then
+    if [ "$current_root_dev_type" = "nfs" ]; then
         current_root_dev="nfs"
     else
         current_root_dev=$(readlink -f "$(findmnt / -o source -n)")
@@ -108,7 +107,7 @@ if ! $installer_unattended; then
             exit 0
         fi
     else
-        installer_target_dev=/dev/$(echo "$target_device_list" | tr -d " ")
+        installer_target_dev="/dev/$(echo "$target_device_list" | tr -d " ")"
     fi
     TARGET_DEVICE_SIZE=$(lsblk --nodeps --noheadings -o SIZE "$installer_target_dev" | tr -d " ")
     if ! dialog --yes-label Ok --no-label Cancel \
@@ -186,11 +185,13 @@ if version_ge "$bmap_version" "3.6"; then
     gauge_pid=$!
 fi
 
-if ! bmaptool ${quiet_flag} copy ${bmap_options} "$installer_image_uri" "${installer_target_dev}"; then
+if ! bmaptool "$quiet_flag" copy "$bmap_options" "$installer_image_uri" "$installer_target_dev"; then
     kill "$gauge_pid"
     exit 1
 fi
 
+# Attempt to terminate the gauge process if still running.
+# Errors are ignored since the process may already have exited.
 kill "$gauge_pid" 2>/dev/null
 
 if ! $installer_unattended; then
-- 
2.39.5

-- 
You received this message because you are subscribed to the Google Groups "isar-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/isar-users/20250820093417.41825-2-kasturi.shekar%40siemens.com.

Re: [PATCH 1/2 v3] fix premature success dialog in installer script

['MOESSBAUER, Felix' via isar-users]

On Wed, 2025-08-20 at 15:04 +0530, 'Kasturi Shekar' via isar-users
wrote:
> The 'Installation successful' message was displayed before the
> progress bar completed. Fixed by tracking the dialog --gauge PID
> and terminating it after bmaptool finishes. This ensures
> the progress bar runs to 100% before showing the final message.

Hi,

I really have a hard time following this series. There are at least 3
"v3" series on the ML, whereby only the first patch is tagged with v3.
Please generate the patches with git format-patch --subject-
prefix="PATCH v3" and send them with git send-email.

Please also add the whole changelog from the initial version on to the
cover letter. This helps to get an overview what changed over time.

I'll do a review on the v4, if there will be any.

Best regards,
Felix

> 
> Changes:
> - Tracked the PID of the dialog --gauge process.
> - Killed gauge process after bmaptool completed.
> - Ensured success message is shown only after the progress bar ends.
> 
> Signed-off-by: Kasturi Shekar <kasturi.shekar@siemens.com>
> ---
>  .../deploy-image/files/usr/bin/deploy-image-wic.sh            | 4
> ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/meta-isar/recipes-installer/deploy-
> image/files/usr/bin/deploy-image-wic.sh b/meta-isar/recipes-
> installer/deploy-image/files/usr/bin/deploy-image-wic.sh
> index aba81c84..fa1061c1 100755
> --- a/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-
> image-wic.sh
> +++ b/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-
> image-wic.sh
> @@ -183,12 +183,16 @@ if version_ge "$bmap_version" "3.6"; then
>          done
>      ) | dialog --gauge "Flashing image, please wait..." 10 70 0 &
>  
> +    gauge_pid=$!
>  fi
>  
>  if ! bmaptool ${quiet_flag} copy ${bmap_options}
> "$installer_image_uri" "${installer_target_dev}"; then
> +    kill "$gauge_pid"
>      exit 1
>  fi
>  
> +kill "$gauge_pid" 2>/dev/null
> +
>  if ! $installer_unattended; then
>      dialog --title "Reboot" \
>             --msgbox "Installation was successful. System will be
> rebooted. Please remove the USB stick." 6 60
> -- 
> 2.39.5

-- 
Siemens AG
Linux Expert Center
Friedrich-Ludwig-Bauer-Str. 3
85748 Garching, Germany

-- 
You received this message because you are subscribed to the Google Groups "isar-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/isar-users/e3c59c2c37a9a9661576aeb57a1bf8d6781ef526.camel%40siemens.com.

[PATCH v4 1/2] fix premature success dialog in installer script

['Kasturi Shekar' via isar-users]

The 'Installation successful' message was displayed before the
progress bar completed. Fixed by tracking the dialog --gauge PID
and terminating it after bmaptool finishes. This ensures
the progress bar runs to 100% before showing the final message.

Changes:
- Tracked the PID of the dialog --gauge process.
- Killed gauge process after bmaptool completed.
- Ensured success message is shown only after the progress bar ends.

Signed-off-by: Kasturi Shekar <kasturi.shekar@siemens.com>
---
 .../deploy-image/files/usr/bin/deploy-image-wic.sh            | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh b/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh
index aba81c84..fa1061c1 100755
--- a/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh
+++ b/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh
@@ -183,12 +183,16 @@ if version_ge "$bmap_version" "3.6"; then
         done
     ) | dialog --gauge "Flashing image, please wait..." 10 70 0 &
 
+    gauge_pid=$!
 fi
 
 if ! bmaptool ${quiet_flag} copy ${bmap_options} "$installer_image_uri" "${installer_target_dev}"; then
+    kill "$gauge_pid"
     exit 1
 fi
 
+kill "$gauge_pid" 2>/dev/null
+
 if ! $installer_unattended; then
     dialog --title "Reboot" \
            --msgbox "Installation was successful. System will be rebooted. Please remove the USB stick." 6 60
-- 
2.39.5

-- 
You received this message because you are subscribed to the Google Groups "isar-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/isar-users/20250821063944.47909-1-kasturi.shekar%40siemens.com.

[PATCH v4 2/2] deploy-image-wic.sh: fix shellcheck warnings

['Kasturi Shekar' via isar-users]

No functional changes, only style and readability fixes
without altering runtime behavior

Signed-off-by: Kasturi Shekar <kasturi.shekar@siemens.com>
---
 .../deploy-image/files/usr/bin/deploy-image-wic.sh    | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh b/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh
index fa1061c1..e21da8e2 100755
--- a/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh
+++ b/meta-isar/recipes-installer/deploy-image/files/usr/bin/deploy-image-wic.sh
@@ -8,8 +8,7 @@ installdata=${INSTALL_DATA:-/install}
 
 SCRIPT_DIR=$( dirname -- "$( readlink -f -- "$0"; )"; )
 
-. ${SCRIPT_DIR}/../lib/deploy-image-wic/handle-config.sh
-
+. "${SCRIPT_DIR}/../lib/deploy-image-wic/handle-config.sh"
 
 if ! $installer_unattended; then
     installer_image_uri=$(find "$installdata" -type f -iname "*.wic*" -a -not -iname "*.wic.bmap" -exec basename {} \;)
@@ -37,7 +36,7 @@ if ! $installer_unattended; then
     # inspired by poky/meta/recipes-core/initrdscripts/files/install-efi.sh
     target_device_list=""
     current_root_dev_type=$(findmnt / -o fstype -n)
-    if [ ${current_root_dev_type} = "nfs" ]; then
+    if [ "$current_root_dev_type" = "nfs" ]; then
         current_root_dev="nfs"
     else
         current_root_dev=$(readlink -f "$(findmnt / -o source -n)")
@@ -108,7 +107,7 @@ if ! $installer_unattended; then
             exit 0
         fi
     else
-        installer_target_dev=/dev/$(echo "$target_device_list" | tr -d " ")
+        installer_target_dev="/dev/$(echo "$target_device_list" | tr -d " ")"
     fi
     TARGET_DEVICE_SIZE=$(lsblk --nodeps --noheadings -o SIZE "$installer_target_dev" | tr -d " ")
     if ! dialog --yes-label Ok --no-label Cancel \
@@ -186,11 +185,13 @@ if version_ge "$bmap_version" "3.6"; then
     gauge_pid=$!
 fi
 
-if ! bmaptool ${quiet_flag} copy ${bmap_options} "$installer_image_uri" "${installer_target_dev}"; then
+if ! bmaptool "$quiet_flag" copy "$bmap_options" "$installer_image_uri" "$installer_target_dev"; then
     kill "$gauge_pid"
     exit 1
 fi
 
+# Attempt to terminate the gauge process if still running.
+# Errors are ignored since the process may already have exited.
 kill "$gauge_pid" 2>/dev/null
 
 if ! $installer_unattended; then
-- 
2.39.5

-- 
You received this message because you are subscribed to the Google Groups "isar-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/isar-users/20250821063944.47909-2-kasturi.shekar%40siemens.com.

[PATCH v4 0/2] fix premature success dialog

['Kasturi Shekar' via isar-users]

Changes since v4:
- added cover letter for maintainers understanding

Changes since v3:
- addressed shellcheck warnings for the script

Changes since v2:
- added more detailed commit message

Changes since v1:
- fix premature success dialog in installer script

Kasturi Shekar (2):
  fix premature success dialog in installer script
  deploy-image-wic.sh: fix shellcheck warnings

 .../files/usr/bin/deploy-image-wic.sh             | 15 ++++++++++-----
 1 file changed, 10 insertions(+), 5 deletions(-)

-- 
2.39.5

-- 
You received this message because you are subscribed to the Google Groups "isar-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/isar-users/20250821063944.47909-3-kasturi.shekar%40siemens.com.

Re: [PATCH v4 0/2] fix premature success dialog

['MOESSBAUER, Felix' via isar-users]

On Thu, 2025-08-21 at 12:09 +0530, 'Kasturi Shekar' via isar-users
wrote:
> Changes since v4:
> - added cover letter for maintainers understanding

Acked-by: Felix Moessbauer <felix.moessbauer@siemens.com>

PS: Please send follow up versions of patch series as top-level email
(no in-reply-to).

Felix

> 
> Changes since v3:
> - addressed shellcheck warnings for the script
> 
> Changes since v2:
> - added more detailed commit message
> 
> Changes since v1:
> - fix premature success dialog in installer script
> 
> Kasturi Shekar (2):
>   fix premature success dialog in installer script
>   deploy-image-wic.sh: fix shellcheck warnings
> 
>  .../files/usr/bin/deploy-image-wic.sh             | 15 ++++++++++---
> --
>  1 file changed, 10 insertions(+), 5 deletions(-)
> 
> -- 
> 2.39.5

-- 
Siemens AG
Linux Expert Center
Friedrich-Ludwig-Bauer-Str. 3
85748 Garching, Germany

-- 
You received this message because you are subscribed to the Google Groups "isar-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/isar-users/4fae774ad02e6eb5bbda9b1ceb3f980eaf53b56c.camel%40siemens.com.