Re: [PATCH 2/3] linux-custom: compile only the specified dtbs by using specific target build

[Uladzimir Bely <ubely@ilbers.de>]

On Wed, 2024-08-14 at 20:35 +0300, 'Nicusor Huhulea' via isar-users
wrote:
> The current implementation makes a full kernel build and that means
> it will
> compile all dtbs specified by the bsp makefile e.g
> arch/arm64/boot/dts/ti/Makefile
> Currently the required dtbs are given by the DTB_FILES.
> 
> These changes are checking if the DTB_FILES is specified, compile
> only those
> and avoids compiling all the dtbs from the bsp directory. Otherwise
> build all dtbs
> specified by the kernel source.
> Preventing the automatic dtb builds is made by using target specific
> build
> commands e.g KERNEL_IMAGETYPE
> The compilation of the dtbs accepts the following formats e.g:
> Kernel Post 6.x:
> a) full path from the architecture directory:
>    arch/${ARCH}/boot/dts/bsp_dir/test.dts
>    arch/${ARCH}/boot/dts/bsp_dir/test.dtb
> b) relative path from the dts directory: bsp_dir/test.dts
> c) device tree blob file: bsp_dir/test.dtb
> Kernel Pre 6.x:
> The same as on Kernel Post 6.x but without the bsp_dir
> 
> The differences when building a full build and when using a specific
> target
> build are:(tests were made on the machine phyboard-mira on 6.x and
> 4.x versions)
> specific target: Build needed 00:02:08, 2219688k disk space linux-phy
> 6.x
> full build:      Build needed 00:02:14, 2271528k disk space linux-phy
> 6.x
> The time difference: the full build took 6s longer than the specific
> target build
> The disk space difference: the full build used 50.6MB more disk space
> than
> the specific target build.
> In conclusion the specific target build is slightly faster and uses
> less
> disk space.
> 
> For now the DTB_FILES variable should accept only Device Tree
> Blobs(.dtb)
> because some areas still depends on it e.g: do_copy_boot_files,
> plugins
> 
> Signed-off-by: Nicusor Huhulea <nicusor.huhulea@siemens.com>
> ---
>  .../linux/files/debian/isar/build.tmpl        | 56
> ++++++++++++++++++-
>  .../linux/files/debian/isar/install.tmpl      | 12 +++-
>  meta/recipes-kernel/linux/linux-custom.inc    |  6 ++
>  3 files changed, 71 insertions(+), 3 deletions(-)
> 
> diff --git a/meta/recipes-kernel/linux/files/debian/isar/build.tmpl
> b/meta/recipes-kernel/linux/files/debian/isar/build.tmpl
> index 1fd6f948..6f186e02 100644
> --- a/meta/recipes-kernel/linux/files/debian/isar/build.tmpl
> +++ b/meta/recipes-kernel/linux/files/debian/isar/build.tmpl
> @@ -22,8 +22,13 @@ do_build() {
>      sed -i "s/@KR@/${KR}/g" ${S}/debian/control ${S}/debian/linux-
> image-${KERNEL_NAME_PROVIDED}.*
>  
>      MAKE_COMMON_ARGS="O=${KERNEL_BUILD_DIR} ${PARALLEL_MAKE}
> KCFLAGS=${KCFLAGS} KAFLAGS=${KAFLAGS}"
> -    if echo "${DEB_BUILD_PROFILES}" | grep -q "kernel"; then # Full
> build
> -        ${MAKE} ${MAKE_COMMON_ARGS} ${KERNEL_EXTRA_BUILDARGS}
> +    if echo "${DEB_BUILD_PROFILES}" | grep -q "kernel"; then
> +        if [ -n "${KERNEL_IMAGETYPE}" ]; then # Override the default
> compilation
> +            ${MAKE} ${MAKE_COMMON_ARGS} ${KERNEL_EXTRA_BUILDARGS}
> ${KERNEL_IMAGETYPE} modules
> +            compile_dtbs
> +        else $ Full build

A typo causing build error.

'/<<PKGBUILDDIR>>/debian/isar/build: line 29: $: command not found'.

> +            ${MAKE} ${MAKE_COMMON_ARGS} ${KERNEL_EXTRA_BUILDARGS}
> +        fi
>      elif echo "${DEB_BUILD_PROFILES}" | grep -q "kbuild"; then #
> Build kernel scripts and tools
>          ${MAKE} ${MAKE_COMMON_ARGS} ${KERNEL_EXTRA_BUILDARGS}
> scripts
>          if grep -q -E
> "CONFIG_STACK_VALIDATION=y|CONFIG_HAVE_OBJTOOL=y"
> ${KERNEL_BUILD_DIR}/.config && [ -d "tools/objtool" ]; then
> @@ -38,6 +43,53 @@ do_build() {
>      set +x
>  }
>  
> +compile_dtbs() {
> +    local prefix="arch/${ARCH}/boot/dts/"
> +
> +    for dtb in ${DTB_FILES}; do
> +        # Handle the case where a standalone(with no path .dtb/.dts)
> file may reside within
> +        # a specific BSP directory or not(kernel pre-6.x)
> +        if [[ ("${dtb}" == *.dtb || "${dtb}" == *.dts) && "${dtb}"
> != */* ]]; then
> +            bsp_dir=""
> +            dts_path=""
> +            if [[ "${dtb}" == *.dtb ]]; then
> +                dts="${dtb%.dtb}.dts"
> +            else
> +                dts="${dtb}"
> +            fi
> +
> +            # recursively search for the dts file in all possible
> BSP directories
> +            while IFS= read -r dts_path; do
> +                if [ -n "${dts_path}" ]; then
> +                    # Eliminate the prefix and dts to get only the
> bsp_dir
> +                    bsp_dir="${dts_path#${prefix}}"
> +                    bsp_dir="${bsp_dir%${dts}}"
> +
> +                    relative_dtb_path="${bsp_dir}${dtb}"
> +                else
> +                    relative_dtb_path="${prefix}${dtb}"
> +                fi
> +            done < <(find "${prefix}" -type f -name "${dts}")
> +
> +        # Check if the path is relative (starts with arch/${ARCH}/)
> +        # and if it does then extract the relative path from the
> architecture specific path
> +        elif [[ "${dtb}" == "${prefix}"* ]]; then
> +            relative_dtb_path="${dtb#${prefix}}"
> +        else
> +            # directly use the given dtb
> +            relative_dtb_path="${dtb}"
> +        fi
> +
> +        # Check if it's a .dts file
> +        if [[ "${relative_dtb_path}" == *.dts ]]; then
> +            #  Change .dts to .dtb
> +            relative_dtb_path="${relative_dtb_path%.dts}.dtb"
> +        fi
> +
> +        ${MAKE} ${MAKE_COMMON_ARGS} ${relative_dtb_path}
> +    done
> +}
> +
>  print_settings() {
>      cat <<EOF
>  # Build settings:
> diff --git a/meta/recipes-kernel/linux/files/debian/isar/install.tmpl
> b/meta/recipes-kernel/linux/files/debian/isar/install.tmpl
> index 00011517..c0a60f4e 100644
> --- a/meta/recipes-kernel/linux/files/debian/isar/install.tmpl
> +++ b/meta/recipes-kernel/linux/files/debian/isar/install.tmpl
> @@ -124,7 +124,17 @@ install_hooks() {
>  
>  install_dtbs() {
>      [ -n "${CONFIG_OF}" ] || return 0
> -    ${MAKE} O=${O} INSTALL_DTBS_PATH=${deb_img_dir}/usr/lib/linux-
> image-${krel} dtbs_install
> +    prefix="arch/${ARCH}/boot/dts/"
> +    src_dir="${O}/${prefix}"
> +    dst_dir=""
> +
> +    dst_dir="${deb_img_dir}/usr/lib/linux-image-${krel}/"
> +    find "${src_dir}" -type f -name '*.dtb' | while IFS= read -r
> dtb_file; do
> +        local relative_path="${dtb_file#"${src_dir}"}"
> +        mkdir -p "${dst_dir}$(dirname "${relative_path}")"
> +        cp "${dtb_file}" "${dst_dir}/${relative_path}"
> +        echo "Copying ${dtb_file} to ${dest_dir}/${relative_path}"
> +    done
>  }
>  
>  install_kmods() {
> diff --git a/meta/recipes-kernel/linux/linux-custom.inc
> b/meta/recipes-kernel/linux/linux-custom.inc
> index 6aa70fd3..31cc480b 100644
> --- a/meta/recipes-kernel/linux/linux-custom.inc
> +++ b/meta/recipes-kernel/linux/linux-custom.inc
> @@ -76,6 +76,7 @@ TEMPLATE_VARS += "                \
>      KERNEL_DEBIAN_DEPENDS         \
>      KERNEL_BUILD_DIR              \
>      KERNEL_FILE                   \
> +    KERNEL_IMAGETYPE              \
>      KERNEL_HEADERS_DEBIAN_DEPENDS \
>      LINUX_VERSION_EXTENSION       \
>      KERNEL_NAME_PROVIDED          \
> @@ -84,12 +85,17 @@ TEMPLATE_VARS += "                \
>      KAFLAGS                       \
>      DISTRIBUTOR                   \
>      KERNEL_EXTRA_BUILDARGS        \
> +    DTB_FILES                     \
>  "
>  
>  inherit dpkg
>  inherit template
>  inherit kbuildtarget
>  
> +DTB_FILES ?= ""
> +
> +KERNEL_IMAGETYPE ?= ""
> +
>  # Add custom cflags to the kernel build
>  KCFLAGS ?= "-fdebug-prefix-map=${CURDIR}=."
>  KAFLAGS ?= "-fdebug-prefix-map=${CURDIR}=."
> -- 
> 2.39.2
> 

-- 
Best regards,
Uladzimir.

-- 
You received this message because you are subscribed to the Google Groups "isar-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/isar-users/34d9cdff55bf0eba83a40d49cef32792020f7bbc.camel%40ilbers.de.