Observing boot failure on nanopi, if booted from external sd-card<br />From FriendlyElec documentation, mmcblk2 is used as internal emmc,<br />while mmcblk0 is used for external sd-card.<br />Some nanopi's doesn't support emmc, instead uses ext sd for booting<br />With this change it will allow booting from external sd-card. Also,<br />the image can be copied to emmc to boot from emmc as well<br /><br />Signed-off-by: Badrikesh Prusty &lt;badrikesh.prusty@siemens.com&gt;<br />---<br /> meta-isar/scripts/lib/wic/canned-wks/nanopi-neo.wks.in | 2 +-<br /> 1 file changed, 1 insertion(+), 1 deletion(-)<br /><br />diff --git a/meta-isar/scripts/lib/wic/canned-wks/nanopi-neo.wks.in b/meta-isar/scripts/lib/wic/canned-wks/nanopi-neo.wks.in<br />index af5b6f08..9489bd12 100644<br />--- a/meta-isar/scripts/lib/wic/canned-wks/nanopi-neo.wks.in<br />+++ b/meta-isar/scripts/lib/wic/canned-wks/nanopi-neo.wks.in<br />@@ -5,6 +5,6 @@<br /><br /> part u-boot --source rawcopy --sourceparams "file=/usr/lib/u-boot/nanopi_neo/u-boot-sunxi-with-spl.bin" --no-table --align 8<br /><br />-part / --source rootfs-u-boot --ondisk mmcblk2 --fstype ext4 --mkfs-extraopts "-T default" --sourceparams "builtin_dt=yes" --label platform --align 1024 --active<br />+part / --source rootfs-u-boot --use-uuid --fstype ext4 --mkfs-extraopts "-T default" --sourceparams "builtin_dt=yes" --label platform --align 1024 --active<br /><br /> bootloader --append "rw rootwait"<br />--<br />2.39.2