Re: Bitbake.conf in isar and linting

["'Simone Weiß' via isar-users" <isar-users@googlegroups.com>]

[-- Attachment #1.1: Type: text/plain, Size: 2185 bytes --]

Hi I see thanks,

While oelint-adv is fairly configurable, I see another point here: Is it 
really advisable to hard code paths such as /etc, /usr/bin, bin and so on? 
I only noticed that those are hard-coded by running oelint-adv, If a distro 
(also in different versions I believe there was some switch with debian 
12(merged usr))
however handles bin usr etc differently then other it would be nice to 
configure them in variables.

Simone

On Wednesday, August 20, 2025 at 7:40:55 AM UTC+2 Schmidt, Adriaan wrote:

> Moessbauer, Felix (FT RPD CED OES-DE), Dienstag, 12. August 2025 11:10:
> > On Mon, 2025-08-11 at 23:44 -0700, 'Simone Weiß' via isar-users wrote:
> > > Hey,
> > >
> > > I am wondering if a specific styleguide exists for isar? Normally for
> > > bitbake based projects I am using oelint-adv.
> > >
> > > When I played around with dpkg-raw and wanted to install some file
> > > under /etc, this caused the linker to complain about not using
> > > sysconfdir for etc.
> > 
> > Hi,
> > 
> > let's loop Adriaan Schmidt in, as he already worked on an ISAR linter.
>
> Well, yes and no...
> Years ago I very briefly looked into technical solutions for bitbake 
> linting (maybe it was oelint-adv, but I don't exactly remember), and how 
> flexible/extensible those might be.
> Even with that in place, it would be up to the Isar Community to actually 
> define a style and rules, but as far as I'm aware nothing like this exists 
> yet.
>
> Adriaan
>
> > Felix
> > 
> > >
> > > Is there a specific reason why isars bitbake.conf would omit to also
> > > define variables got etc, bin and friends?
> > >
> > >
> > > Best,
> > > Simone
> > 
> > --
> > Siemens AG
> > Linux Expert Center
> > Friedrich-Ludwig-Bauer-Str. 3
> > 85748 Garching, Germany
>
>

-- 
You received this message because you are subscribed to the Google Groups "isar-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/isar-users/b2cf3b00-12df-4d6a-9a0a-380ff95a43afn%40googlegroups.com.

[-- Attachment #1.2: Type: text/html, Size: 2933 bytes --]