Re: [PATCH] Update kas-container to 5.4

[Srinuvasan Arjunan <srinuvasanasv@gmail.com>]

[-- Attachment #1.1: Type: text/plain, Size: 18856 bytes --]



On Thursday, June 25, 2026 at 11:31:23 AM UTC+5:30 srinuv...@siemens.com 
wrote:

From: Srinuvasan A <srinuv...@siemens.com> 

Update kas-container to 5.4 to bring support for 
the Isar rootless build system and incorporate various 
fixes and improvements. 

Signed-off-by: Srinuvasan A <srinuv...@siemens.com> 
--- 
kas/kas-container | 300 +++++++++++++++++++++++++--------------------- 
1 file changed, 161 insertions(+), 139 deletions(-) 

diff --git a/kas/kas-container b/kas/kas-container 
index 993f0bb8..631e40c3 100755 
--- a/kas/kas-container 
+++ b/kas/kas-container 
@@ -27,7 +27,7 @@ 

set -e 

-KAS_CONTAINER_SCRIPT_VERSION="5.2" 
+KAS_CONTAINER_SCRIPT_VERSION="5.4" 
KAS_IMAGE_VERSION_DEFAULT="${KAS_CONTAINER_SCRIPT_VERSION}" 
KAS_CONTAINER_IMAGE_DISTRO_DEFAULT="" 
KAS_CONTAINER_IMAGE_PATH_DEFAULT="ghcr.io/siemens/kas" 
@@ -49,9 +49,10 @@ usage() 
printf "%b" "\nPositional arguments:\n" 
printf "%b" "build\t\t\tCheck out repositories and build target.\n" 
printf "%b" "checkout\t\tCheck out repositories but do not build.\n" 
+ printf "%b" "diff\t\t\tCompare two kas configurations.\n" 
printf "%b" "dump\t\t\tCheck out repositories and write flat version\n" 
printf "%b" " \t\t\tof config to stdout.\n" 
- printf "%b" "lock\t\t\tCreate and update kas project lockfiles\n" 
+ printf "%b" "lock\t\t\tCreate and update kas project lockfiles.\n" 
printf "%b" "shell\t\t\tRun a shell in the build environment.\n" 
printf "%b" "for-all-repos\t\tRun specified command in each repository.\n" 
printf "%b" "clean\t\t\tClean build artifacts, keep sstate cache and " \ 
@@ -61,20 +62,19 @@ usage() 
printf "%b" "cleanall\t\tClean build artifacts, sstate cache and " \ 
"downloads.\n" 
printf "%b" "purge\t\t\tRemove all data managed by kas. Run with 
'--dry-run'\n" 
- printf "%b" " \t\t\tto check what would be removed\n" 
+ printf "%b" " \t\t\tto check what would be removed.\n" 
printf "%b" "menu\t\t\tProvide configuration menu and trigger " \ 
"configured build.\n" 
printf "%b" "\nOptional arguments:\n" 
- printf "%b" "--isar\t\t\tUse kas-isar container to build Isar image. To 
force\n" 
- printf "%b" " \t\t\tthe use of run0 over sudo, set KAS_SUDO_CMD=run0.\n" 
- printf "%b" "--with-loop-dev Pass a loop device to the " \ 
- "container. Only required if\n" 
- printf "%b" "\t\t\tloop-mounting is used by recipes.\n" 
+ printf "%b" "--isar-privileged\tRun an Isar build in privileged mode. " \ 
+ "To force the use\n" 
+ printf "%b" "\t\t\tof run0 over sudo, set KAS_SUDO_CMD=run0.\n" 
+ printf "%b" "--isar-rootless\t\tRun an Isar build in rootless mode.\n" 
printf "%b" "--runtime-args\t\tAdditional arguments to pass to the " \ 
- "container runtime\n" 
+ "container runtime.\n" 
printf "%b" "\t\t\tfor running the build.\n" 
printf "%b" "-l, --log-level\t\tSet log level (default=info).\n" 
- printf "%b" "--version\t\tprint program version.\n" 
+ printf "%b" "--version\t\tPrint program version.\n" 
printf "%b" "--ssh-dir\t\tDirectory containing SSH configurations.\n" 
printf "%b" "\t\t\tAvoid \$HOME/.ssh unless you fully trust the " \ 
"container.\n" 
@@ -83,13 +83,15 @@ usage() 
printf "%b" "\t\t\tAvoid \$HOME/.aws unless you fully trust the " \ 
"container.\n" 
printf "%b" "--git-credential-store\tFile path to the git credential " \ 
- "store\n" 
+ "store.\n" 
+ printf "%b" "--git-credential-socket\tPath to the git credential cache " 
\ 
+ "socket.\n" 
printf "%b" "--no-proxy-from-env\tDo not inherit proxy settings from " \ 
"environment.\n" 
printf "%b" "--repo-ro\t\tMount current repository read-only\n" \ 
- "\t\t\t(default for build command)\n" 
+ "\t\t\t(default for build command).\n" 
printf "%b" "--repo-rw\t\tMount current repository writable\n" \ 
- "\t\t\t(default for shell command)\n" 
+ "\t\t\t(default for shell command).\n" 
printf "%b" "-h, --help\t\tShow this help message and exit.\n" 
printf "%b" "\n" 
printf "%b" "You can force the use of podman over docker using " \ 
@@ -143,11 +145,6 @@ prepare_sudo_cmd() 

enable_isar_mode() 
{ 
- if [ -n "${ISAR_MODE}" ]; then 
- return 
- fi 
- ISAR_MODE=1 
- 
KAS_CONTAINER_IMAGE_NAME_DEFAULT="kas-isar" 
KAS_ISAR_ARGS="--privileged" 

@@ -159,14 +156,38 @@ enable_isar_mode() 
export PATH="${PATH}:/usr/sbin" 
elif [ "${KAS_DOCKER_ROOTLESS}" = "1" ]; then 
prepare_sudo_cmd 
- export DOCKER_HOST="${DOCKER_HOST:-unix:///var/run/docker.sock}" 
- debug "kas-isar does not support rootless docker. Using system docker" 
+ DOCKER_HOST_DEFAULT="$(docker context inspect default --format 
'{{.Endpoints.docker.Host}}')" 
+ export DOCKER_HOST="${DOCKER_HOST:-$DOCKER_HOST_DEFAULT}" 
+ debug "kas-isar does not support rootless docker. Using system docker in 
$DOCKER_HOST" 
# force use of well-known system docker socket 
KAS_CONTAINER_COMMAND="${_KAS_SUDO_CMD} ${KAS_CONTAINER_COMMAND}" 
KAS_DOCKER_ROOTLESS=0 
fi 
} 

+enable_isar_rootless_mode() 
+{ 
+ KAS_CONTAINER_IMAGE_NAME_DEFAULT="kas-isar" 
+ 
+ # Use --privileged to pass the ambient capabilities into the container. 
+ # When calling from the user session (podman or docker-rootless), this 
+ # is fundamentally different from the system docker run --privileged 
+ if [ "${KAS_CONTAINER_ENGINE}" = "podman" ]; then 
+ KAS_RUNTIME_ARGS="${KAS_RUNTIME_ARGS} --userns=keep-id --privileged" 
+ elif [ "${KAS_DOCKER_ROOTLESS}" = "1" ]; then 
+ KAS_ISAR_ARGS="--privileged" 
+ else 
+ # we don't need --privileged, but we need to run with SYS_ADMIN 
+ # to be able to unshare. 
+ KAS_ISAR_ARGS=" \ 
+ --security-opt seccomp=unconfined \ 
+ --security-opt apparmor=unconfined \ 
+ --security-opt systempaths=unconfined \ 
+ --cap-add=SYS_ADMIN \ 
+ " 
+ fi 
+} 
+ 
enable_oe_mode() 
{ 
if [ "${KAS_CONTAINER_ENGINE}" = "podman" ]; then 
@@ -174,6 +195,7 @@ enable_oe_mode() 
# calling "podman run" has a 1:1 mapping 
KAS_RUNTIME_ARGS="${KAS_RUNTIME_ARGS} --userns=keep-id" 
fi 
+ BUILD_SYSTEM="openembedded" 
} 

enable_unpriv_userns_docker() 
@@ -210,6 +232,19 @@ check_and_expand() 
realpath -e "$_varval" 
} 

+# SC2034: DIR appears unused (ignore, as they are used inside eval) 
+# shellcheck disable=2034 
+setup_kas_dirs() 
+{ 
+ KAS_WORK_DIR="${KAS_WORK_DIR:-$(pwd)}" 
+ KAS_WORK_DIR="$(check_and_expand KAS_WORK_DIR required)" 
+ KAS_BUILD_DIR="$(check_and_expand KAS_BUILD_DIR create)" 
+ KAS_REPO_REF_DIR="$(check_and_expand KAS_REPO_REF_DIR required)" 
+ DL_DIR="$(check_and_expand DL_DIR createrec)" 
+ SSTATE_DIR="$(check_and_expand SSTATE_DIR createrec)" 
+ KAS_BUILDTOOLS_DIR="$(check_and_expand KAS_BUILDTOOLS_DIR createrec)" 
+} 
+ 
# Params: FILE 
# Returns: root repo dir of file 
repo_path_of_file() 
@@ -260,14 +295,6 @@ forward_dir() 
fi 
} 

-check_docker_rootless() 
-{ 
- KAS_DOCKER_ROOTLESS=0 
- if [ "$(docker context show)" = "rootless" ]; then 
- KAS_DOCKER_ROOTLESS=1 
- fi 
-} 
- 
enable_docker_rootless() 
{ 
warning "Rootless docker used, only limited functionality available." 
@@ -281,118 +308,44 @@ enable_docker_rootless() 
KAS_RUNTIME_ARGS="${KAS_RUNTIME_ARGS} -e KAS_DOCKER_ROOTLESS=1" 
} 

-KAS_GIT_OVERLAY_FILE="" 
-kas_container_cleanup() 
-{ 
- if [ -f "${KAS_GIT_OVERLAY_FILE}" ]; then 
- trace rm -f "${KAS_GIT_OVERLAY_FILE}" 
- fi 
-} 
-trap kas_container_cleanup EXIT INT TERM 
- 
set_container_image_var() 
{ 
+ # if the image is explicitly set, use that 
+ if [ -n "${KAS_CONTAINER_IMAGE}" ]; then 
+ return 
+ fi 
KAS_IMAGE_VERSION="${KAS_IMAGE_VERSION:-${KAS_IMAGE_VERSION_DEFAULT}}" 
KAS_CONTAINER_IMAGE_DISTRO="${KAS_CONTAINER_IMAGE_DISTRO:-${KAS_CONTAINER_IMAGE_DISTRO_DEFAULT}}" 

KAS_CONTAINER_IMAGE_NAME="${KAS_CONTAINER_IMAGE_NAME:-${KAS_CONTAINER_IMAGE_NAME_DEFAULT}}" 

KAS_CONTAINER_IMAGE_PATH="${KAS_CONTAINER_IMAGE_PATH:-${KAS_CONTAINER_IMAGE_PATH_DEFAULT}}" 

- 
KAS_CONTAINER_IMAGE_DEFAULT="${KAS_CONTAINER_IMAGE_PATH}/${KAS_CONTAINER_IMAGE_NAME}:${KAS_IMAGE_VERSION}" 

- 
KAS_CONTAINER_IMAGE="${KAS_CONTAINER_IMAGE:-${KAS_CONTAINER_IMAGE_DEFAULT}}" 

+ 
KAS_CONTAINER_IMAGE="${KAS_CONTAINER_IMAGE_PATH}/${KAS_CONTAINER_IMAGE_NAME}:${KAS_IMAGE_VERSION}" 

if [ -n "${KAS_CONTAINER_IMAGE_DISTRO}" ]; then 
KAS_CONTAINER_IMAGE="${KAS_CONTAINER_IMAGE}-${KAS_CONTAINER_IMAGE_DISTRO}" 
fi 
} 

-# SC2034: DIR appears unused (ignore, as they are used inside eval) 
-# shellcheck disable=2034 
-setup_kas_dirs() 
-{ 
- KAS_WORK_DIR="${KAS_WORK_DIR:-$(pwd)}" 
- KAS_WORK_DIR="$(check_and_expand KAS_WORK_DIR required)" 
- KAS_BUILD_DIR="$(check_and_expand KAS_BUILD_DIR create)" 
- KAS_REPO_REF_DIR="$(check_and_expand KAS_REPO_REF_DIR required)" 
- DL_DIR="$(check_and_expand DL_DIR createrec)" 
- SSTATE_DIR="$(check_and_expand SSTATE_DIR createrec)" 
- KAS_BUILDTOOLS_DIR="$(check_and_expand KAS_BUILDTOOLS_DIR createrec)" 
-} 
-setup_kas_dirs 
- 
-KAS_CONTAINER_ENGINE="${KAS_CONTAINER_ENGINE:-${KAS_DOCKER_ENGINE}}" 
-if [ -z "${KAS_CONTAINER_ENGINE}" ]; then 
- # Try to auto-detect a container engine 
- if command -v docker >/dev/null; then 
- case $(docker -v 2>/dev/null) in 
- podman*) 
- # The docker command is an alias for podman 
- KAS_CONTAINER_ENGINE=podman 
- ;; 
- Docker*) 
- # The docker command is the real docker 
- KAS_CONTAINER_ENGINE=docker 
- ;; 
- *) 
- # The docker command is an unknown engine 
- fatal_error "docker command found, but unknown engine detected" 
- esac 
- elif command -v podman >/dev/null; then 
- KAS_CONTAINER_ENGINE=podman 
- else 
- fatal_error "no container engine found, need docker or podman" 
- fi 
-fi 
- 
-KAS_RUNTIME_ARGS="--log-driver=none --user=root" 
- 
-case "${KAS_CONTAINER_ENGINE}" in 
-docker) 
- KAS_CONTAINER_COMMAND="docker" 
- enable_unpriv_userns_docker 
- check_docker_rootless 
- ;; 
-podman) 
- KAS_CONTAINER_COMMAND="podman" 
- KAS_RUNTIME_ARGS="${KAS_RUNTIME_ARGS} --security-opt label=disable" 
- ;; 
-*) 
- fatal_error "unknown container engine '${KAS_CONTAINER_ENGINE}'" 
- ;; 
-esac 
- 
-# parse kas-container options 
+# parse kas-container options, leave build system empty to distinguish 
between 
+# explicitly set via flag and implicitly via config. 
+BUILD_SYSTEM="" 
+KAS_OPTIONS_DIRECT="" 
+KAS_EXTRA_RUNTIME_ARGS="" 
while [ $# -gt 0 ]; do 
case "$1" in 
- --isar) 
- enable_isar_mode 
+ --isar | --isar-privileged) 
+ if [ "$1" = "--isar" ]; then 
+ warning "The semantic of '--isar' might change in the" \ 
+ "future. Please use '--isar-privileged' instead." 
+ fi 
+ BUILD_SYSTEM="isar-privileged" 
shift 1 
;; 
- --with-loop-dev) 
- if ! KAS_LOOP_DEV=$(/sbin/losetup -f 2>/dev/null); then 
- if [ "$(id -u)" -eq 0 ]; then 
- fatal_error "loop device not available!" 
- fi 
- prepare_sudo_cmd 
- if ! [ "$KAS_SUDO_CMD" = "sudo" ]; then 
- fatal_error '--with-loop-dev requires sudo for device setup.' 
- fi 
- sudo_command="/sbin/losetup -f" 
- sudo_message="[sudo] enter password to setup loop" 
- sudo_message="$sudo_message devices by calling" 
- sudo_message="$sudo_message '$sudo_command': " 
- # SC2086: Double quote to prevent globbing and word splitting. 
- # shellcheck disable=2086 
- if ! KAS_LOOP_DEV=$(sudo -p "$sudo_message" $sudo_command \ 
- 2>/dev/null); then 
- fatal_error "loop device setup unsuccessful!" \ 
- "try calling '$sudo_command' with root" \ 
- "permissions manually." 
- fi 
- fi 
- KAS_WITH_LOOP_DEV="--device ${KAS_LOOP_DEV}" 
+ --isar-rootless) 
+ BUILD_SYSTEM="isar-rootless" 
shift 1 
;; 
- --runtime-args|--docker-args) 
+ --runtime-args | --docker-args) 
[ $# -gt 0 ] || usage 
- KAS_RUNTIME_ARGS="${KAS_RUNTIME_ARGS} $2" 
+ KAS_EXTRA_RUNTIME_ARGS=" $2" 
shift 2 
;; 
--ssh-dir) 
@@ -417,6 +370,13 @@ while [ $# -gt 0 ]; do 
KAS_GIT_CREDENTIAL_STORE="$2" 
shift 2 
;; 
+ 
+ --git-credential-socket) 
+ [ $# -gt 2 ] || usage 
+ KAS_GIT_CREDENTIAL_SOCKET="$2" 
+ shift 2 
+ ;; 
+ 
--no-proxy-from-env) 
KAS_NO_PROXY_FROM_ENV=1 
shift 1 
@@ -446,19 +406,19 @@ while [ $# -gt 0 ]; do 
--*) 
usage 
;; 
- clean|cleansstate|cleanall|purge) 
+ clean | cleansstate | cleanall | purge) 
KAS_REPO_MOUNT_OPT_DEFAULT="ro" 
KAS_CMD=$1 
shift 1 
break 
;; 
- shell|lock) 
+ shell | lock) 
KAS_REPO_MOUNT_OPT_DEFAULT="rw" 
KAS_CMD=$1 
shift 1 
break 
;; 
- build|checkout|for-all-repos|menu) 
+ build | checkout | for-all-repos | menu) 
KAS_REPO_MOUNT_OPT_DEFAULT="ro" 
KAS_CMD=$1 
shift 1 
@@ -486,6 +446,10 @@ while [ $# -gt 0 ]; do 
esac 
done 

+KAS_RUNTIME_ARGS="--log-driver=none --user=root" 
+ 
+setup_kas_dirs 
+ 
[ -n "${KAS_CMD}" ] || usage 

KAS_EXTRA_BITBAKE_ARGS=0 
@@ -494,17 +458,17 @@ KAS_FILES= 
# parse kas sub-command options 
while [ $# -gt 0 ] && [ $KAS_EXTRA_BITBAKE_ARGS -eq 0 ]; do 
case "$1" in 
- --format|--indent|--provenance|--skip|--target|--task) 
+ --format | --indent | --provenance | --skip | --target | --task) 
KAS_OPTIONS="${KAS_OPTIONS} $1 $2" 
shift 1 
shift 1 || KAS_OPTIONS="--help" 
;; 
- -c|--cmd|--command) 
+ -c | --cmd | --command) 
KAS_BITBAKE_C_OPTION_ARGS="$2" 
shift 1 
shift 1 || KAS_OPTIONS="--help" 
;; 
- -E|--preserve-env) 
+ -E | --preserve-env) 
fatal_error "$1 is not supported with ${KAS_CONTAINER_SELF_NAME}" 
;; 
--) 
@@ -563,10 +527,10 @@ if [ "${KAS_CMD}" = "menu" ]; then 
if [ "$(echo "${KAS_FIRST_FILES}" | wc -w)" -ne "1" ]; then 
fatal_error "menu plugin only supports a single Kconfig file" 
fi 
- BUILD_SYSTEM=$(tr '\n' '\f' 2>/dev/null < "${KAS_FIRST_FILES}" | \ 
+ BUILD_SYSTEM=${BUILD_SYSTEM:-$(tr '\n' '\f' 2>/dev/null < 
"${KAS_FIRST_FILES}" | 
sed -e 's/\(.*\fconfig KAS_BUILD_SYSTEM\f\(.*\)\|.*\)/\2/' \ 
-e 's/\f\([[:alpha:]].*\|$\)//' \ 
- -e 's/.*default \"\(.*\)\".*/\1/') 
+ -e 's/.*default \"\(.*\)\".*/\1/')} 
else 
if [ -z "${KAS_FIRST_FILES}" ]; then 
KAS_FIRST_FILES="${KAS_WORK_DIR}/.config.yaml" 
@@ -574,20 +538,60 @@ else 

# We only get the first build system and let kas check if mixed 
_KAS_FIRST_FILE=$(echo "${KAS_FIRST_FILES}" | awk '{print $1}') 
- BUILD_SYSTEM=$(grep -e "^build_system: " "${_KAS_FIRST_FILE}" 2>/dev/null 
| \ 
- sed 's/build_system:[ ]\+//') 
+ BUILD_SYSTEM=${BUILD_SYSTEM:-$(grep -e "^build_system: " 
"${_KAS_FIRST_FILE}" 2>/dev/null | 
+ sed 's/build_system:[ ]\+//')} 
+fi 
+ 
+KAS_CONTAINER_ENGINE="${KAS_CONTAINER_ENGINE:-${KAS_DOCKER_ENGINE}}" 
+if [ -z "${KAS_CONTAINER_ENGINE}" ]; then 
+ # Try to auto-detect a container engine 
+ # Defaults if there are multiple options: 
+ # podman if build system is isar-rootless, docker otherwise 
+ if [ "${BUILD_SYSTEM}" = "isar-rootless" ] && command -v podman 
>/dev/null 2>&1; then 
+ KAS_CONTAINER_ENGINE=podman 
+ elif command -v docker >/dev/null 2>&1 && docker -v 2>/dev/null | grep -q 
'^Docker'; then 
+ KAS_CONTAINER_ENGINE=docker 
+ elif command -v podman >/dev/null 2>&1; then 
+ KAS_CONTAINER_ENGINE=podman 
+ else 
+ fatal_error "no container engine found, need docker or podman" 
+ fi 
fi 

-if [ "${BUILD_SYSTEM}" = "isar" ]; then 
+KAS_DOCKER_ROOTLESS=0 
+case "${KAS_CONTAINER_ENGINE}" in 
+docker) 
+ KAS_CONTAINER_COMMAND="docker" 
+ enable_unpriv_userns_docker 
+ if [ "$(docker context show)" = "rootless" ]; then 
+ KAS_DOCKER_ROOTLESS=1 
+ fi 
+ ;; 
+podman) 
+ KAS_CONTAINER_COMMAND="podman" 
+ KAS_RUNTIME_ARGS="${KAS_RUNTIME_ARGS} --security-opt label=disable" 
+ ;; 
+*) 
+ fatal_error "unknown container engine '${KAS_CONTAINER_ENGINE}'" 
+ ;; 
+esac 
+ 
+if [ "${BUILD_SYSTEM}" = "isar" ] || [ "${BUILD_SYSTEM}" = 
"isar-privileged" ]; then 
enable_isar_mode 
-elif [ -z "${ISAR_MODE}" ]; then 
+elif [ "${BUILD_SYSTEM}" = "isar-rootless" ]; then 
+ enable_isar_rootless_mode 
+else 
enable_oe_mode 
fi 

# clean can be executed without config, hence manually forward the build 
system 
-if [ "${ISAR_MODE}" = "1" ] && echo "${KAS_CMD}" | grep -qe 
"^clean\|purge"; then 
- KAS_OPTIONS="${KAS_OPTIONS} --isar" 
-fi 
+case "${BUILD_SYSTEM}" in 
+isar*) 
+ if echo "${KAS_CMD}" | grep -qe "^clean\|purge"; then 
+ KAS_OPTIONS="${KAS_OPTIONS} --${BUILD_SYSTEM}" 
+ fi 
+ ;; 
+esac 

set_container_image_var 

@@ -632,6 +636,16 @@ forward_dir KAS_BUILDTOOLS_DIR "/buildtools" "rw" 

if git_com_dir=$(git -C "${KAS_REPO_DIR}" rev-parse --git-common-dir 
2>/dev/null) \ 
&& [ "$git_com_dir" != "$(git -C "${KAS_REPO_DIR}" rev-parse --git-dir)" ]; 
then 
+ 
+ KAS_GIT_OVERLAY_FILE="" 
+ kas_container_cleanup() 
+ { 
+ if [ -f "${KAS_GIT_OVERLAY_FILE}" ]; then 
+ trace rm -f "${KAS_GIT_OVERLAY_FILE}" 
+ fi 
+ } 
+ trap kas_container_cleanup EXIT INT TERM 
+ 
# If (it's a git repo) and the common dir isn't the git-dir, it is shared 
worktree and 
# we have to mount the common dir in the container to make git work 
# The mount path inside the container is different from the host path. 
Hence, we over-mount 
@@ -685,6 +699,14 @@ if [ -n "${KAS_GIT_CREDENTIAL_STORE}" ] ; then 
set -- "$@" -v "$(realpath -e 
"${KAS_GIT_CREDENTIAL_STORE}")":/var/kas/userdata/.git-credentials:ro 
fi 

+if [ -n "${KAS_GIT_CREDENTIAL_SOCKET}" ] ; then 
+ if [ ! -S "${KAS_GIT_CREDENTIAL_SOCKET}" ]; then 
+ fatal_error "passed KAS_GIT_CREDENTIAL_SOCKET 
'${KAS_GIT_CREDENTIAL_SOCKET}' is not a socket" 
+ fi 
+ KAS_GIT_CREDENTIAL_HELPER_DEFAULT="cache 
--socket=/var/kas/userdata/.git-cache-socket" 
+ set -- "$@" -v "$(realpath -e 
"${KAS_GIT_CREDENTIAL_SOCKET}")":/var/kas/userdata/.git-cache-socket 
+fi 
+ 
GIT_CREDENTIAL_HELPER="${GIT_CREDENTIAL_HELPER:-${KAS_GIT_CREDENTIAL_HELPER_DEFAULT}}" 


if [ -n "${GIT_CREDENTIAL_HELPER}" ] ; then 
@@ -739,7 +761,7 @@ done 

# propagate only supported SHELL settings 
case "$SHELL" in 
-/bin/sh|/bin/bash|/bin/dash) 
+/bin/sh | /bin/bash | /bin/dash) 
set -- "$@" -e "SHELL=$SHELL" 
;; 
*) 
@@ -757,7 +779,7 @@ fi 

# SC2086: Double quote to prevent globbing and word splitting. 
# shellcheck disable=2086 
-set -- "$@" ${KAS_ISAR_ARGS} ${KAS_WITH_LOOP_DEV} ${KAS_RUNTIME_ARGS} \ 
+set -- "$@" ${KAS_ISAR_ARGS} ${KAS_RUNTIME_ARGS} ${KAS_EXTRA_RUNTIME_ARGS} 
\ 
${KAS_CONTAINER_IMAGE} ${KAS_OPTIONS_DIRECT} ${KAS_CMD} ${KAS_OPTIONS} 
if [ -n "${KAS_BITBAKE_C_OPTION_ARGS}" ]; then 
set -- "$@" -c "${KAS_BITBAKE_C_OPTION_ARGS}" 
-- 
2.34.1



    Sorry, I missed that this had already been sent by Flex just before. 
Please ignore this one.  

    Many thanks,
    Srinu  

-- 
You received this message because you are subscribed to the Google Groups "isar-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/isar-users/eecda5b2-25b4-4a8e-8aa6-e4edc6fcb6adn%40googlegroups.com.

[-- Attachment #1.2: Type: text/html, Size: 22786 bytes --]