From: "'MOESSBAUER, Felix' via isar-users" <isar-users@googlegroups.com>
To: "Kiszka, Jan" <jan.kiszka@siemens.com>
Cc: "isar-users@googlegroups.com" <isar-users@googlegroups.com>
Subject: Re: [PATCH v2 RESEND 2/2] delay creation of initrd until end of rootfs install
Date: Wed, 18 Sep 2024 13:15:56 +0000 [thread overview]
Message-ID: <f7a61a93923ae99c083e1e36dbe136da2bd0228d.camel@siemens.com> (raw)
In-Reply-To: <f1577863-5353-4a56-bad7-366fa51b9741@siemens.com>
On Tue, 2024-09-17 at 14:26 +0200, Jan Kiszka wrote:
> On 17.09.24 11:15, Felix Moessbauer wrote:
> > This patch solves major performance issues around the initramfs
> > creation by ensuring that the initrd is only created once. This is
> > implemented by stubbing the update-initramfs call during the
> > package
> > installing. After all apt operations are completed, we manually
> > trigger the initrd creation. In case a custom initramfs is used,
> > the
> > creation is completely skipped in the image rootfs, as this would
> > anyways not be used.
> >
> > Before that, each package install that made a initrd relevant
> > change
> > triggered the update of the initrd. As we have multiple apt calls
> > during
>
> Anything else but
> https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1079509 (which is
> an
> optimization) would be bugs and no good reason for this workaround.
Hmm... I tend to disagree. The Debian patch definitely improves the
situation, however:
1. it is unlikely that this will get backported
2. It still provides no mechanism to completely disable the initrd
generation
But maybe we could approach the problem differently:
Reg. 1: Provide a local build of that package, as already mentioned on
the ML
Reg. 2: Tricky, as the kernel needs to be installed into the rootfs as
well to get the modules.
Felix
>
> Jan
>
> > the build, this step was sometimes executed multiple times. In
> > addition,
> > the apt install step is emulated, further slowing down the initrd
> > generation. On some layers on non native architecutes, this summed
> > up to
> > over 10 minutes of initrd generation time.
> >
> > Signed-off-by: Felix Moessbauer <felix.moessbauer@siemens.com>
> > ---
> > meta/classes/image.bbclass | 4 +++
> > meta/classes/rootfs.bbclass | 32
> > +++++++++++++++++++
> > .../isar-bootstrap/isar-bootstrap.inc | 2 ++
> > 3 files changed, 38 insertions(+)
> >
> > diff --git a/meta/classes/image.bbclass
> > b/meta/classes/image.bbclass
> > index 0dea06fa..b6763d73 100644
> > --- a/meta/classes/image.bbclass
> > +++ b/meta/classes/image.bbclass
> > @@ -67,6 +67,8 @@ inherit essential
> >
> > ROOTFSDIR = "${IMAGE_ROOTFS}"
> > ROOTFS_FEATURES += "clean-package-cache clean-pycache generate-
> > manifest export-dpkg-status clean-log-files clean-debconf-cache"
> > +# when using a custom initrd, do not generate one as part of the
> > image rootfs
> > +ROOTFS_FEATURES += "${@ '' if d.getVar('INITRD_IMAGE') == '' else
> > 'no-generate-initrd'}"
> > ROOTFS_PACKAGES += "${IMAGE_PREINSTALL}
> > ${@isar_multiarch_packages('IMAGE_INSTALL', d)}"
> > ROOTFS_MANIFEST_DEPLOY_DIR ?= "${DEPLOY_DIR_IMAGE}"
> > ROOTFS_DPKGSTATUS_DEPLOY_DIR ?= "${DEPLOY_DIR_IMAGE}"
> > @@ -458,6 +460,8 @@ do_rootfs_quality_check() {
> > args="${ROOTFS_QA_FIND_ARGS}"
> > # rootfs_finalize chroot-setup.sh
> > args="${args} ! -path ${ROOTFSDIR}/var/lib/dpkg/diversions"
> > + # initramfs is generated outside of the image rootfs
> > + args="${args} ! -path ${ROOTFSDIR}/boot/initrd.img*"
> > for cmd in ${ROOTFS_POSTPROCESS_COMMAND}; do
> > case "${cmd}" in
> > image_postprocess_mark)
> > diff --git a/meta/classes/rootfs.bbclass
> > b/meta/classes/rootfs.bbclass
> > index f0abd795..5c7a4c9a 100644
> > --- a/meta/classes/rootfs.bbclass
> > +++ b/meta/classes/rootfs.bbclass
> > @@ -14,6 +14,7 @@ ROOTFS_BASE_DISTRO ?= "${BASE_DISTRO}"
> > # 'generate-manifest' - generate a package manifest of the rootfs
> > into ${ROOTFS_MANIFEST_DEPLOY_DIR}
> > # 'export-dpkg-status' - exports /var/lib/dpkg/status file to
> > ${ROOTFS_DPKGSTATUS_DEPLOY_DIR}
> > # 'clean-log-files' - delete log files that are not owned by
> > packages
> > +# 'no-generate-initrd' - do not generate debian default initrd
> > ROOTFS_FEATURES ?= ""
> >
> > ROOTFS_APT_ARGS="install --yes -o Debug::pkgProblemResolver=yes"
> > @@ -127,6 +128,16 @@ rootfs_configure_apt() {
> > EOSUDO
> > }
> >
> > +ROOTFS_CONFIGURE_COMMAND += "rootfs_disable_initrd_generation"
> > +rootfs_disable_initrd_generation[weight] = "1"
> > +rootfs_disable_initrd_generation() {
> > + # fully disable initrd generation
> > + echo "replace update-initramfs with stub"
> > + sudo mv "${ROOTFSDIR}/usr/sbin/update-initramfs" \
> > + "${ROOTFSDIR}/usr/sbin/update-initramfs.isar"
> > + sudo chroot "${ROOTFSDIR}" ln -s "/usr/bin/true"
> > "/usr/sbin/update-initramfs"
> > +}
> > +
> >
> > ROOTFS_INSTALL_COMMAND += "rootfs_install_pkgs_update"
> > rootfs_install_pkgs_update[weight] = "5"
> > @@ -331,6 +342,27 @@ rootfs_cleanup_base_apt() {
> > EOSUDO
> > }
> >
> > +ROOTFS_POSTPROCESS_COMMAND += "rootfs_restore_initrd_tooling"
> > +rootfs_restore_initrd_tooling[weight] = "1"
> > +rootfs_restore_initrd_tooling() {
> > + if [ -e "${ROOTFSDIR}/usr/sbin/update-initramfs.isar" ]; then
> > + sudo mv -f "${ROOTFSDIR}/usr/sbin/update-initramfs.isar" \
> > + "${ROOTFSDIR}/usr/sbin/update-initramfs"
> > + fi
> > +}
> > +
> > +ROOTFS_POSTPROCESS_COMMAND +=
> > "${@bb.utils.contains('ROOTFS_FEATURES', 'no-generate-initrd', '',
> > 'rootfs_generate_initrd', d)}"
> > +rootfs_generate_initrd[weight] = "10"
> > +rootfs_generate_initrd() {
> > + if [ -n "$(sudo find '${ROOTFSDIR}/boot' -type f -name
> > 'vmlinu[xz]*')" ]; then
> > + sudo -E chroot "${ROOTFSDIR}" sh -c '\
> > + export kernel_version=$(basename /boot/vmlinu[xz]* |
> > cut -d'-' -f2-); \
> > + update-initramfs -u -v -k "$kernel_version";'
> > + else
> > + echo "no kernel in this rootfs, do not generate initrd"
> > + fi
> > +}
> > +
> > do_rootfs_postprocess[vardeps] = "${ROOTFS_POSTPROCESS_COMMAND}"
> > do_rootfs_postprocess[network] = "${TASK_USE_SUDO}"
> > python do_rootfs_postprocess() {
> > diff --git a/meta/recipes-core/isar-bootstrap/isar-bootstrap.inc
> > b/meta/recipes-core/isar-bootstrap/isar-bootstrap.inc
> > index 12f32ff0..e85c2894 100644
> > --- a/meta/recipes-core/isar-bootstrap/isar-bootstrap.inc
> > +++ b/meta/recipes-core/isar-bootstrap/isar-bootstrap.inc
> > @@ -28,6 +28,8 @@ DISTRO_BOOTSTRAP_KEYS ?= ""
> > THIRD_PARTY_APT_KEYS ?= ""
> > DEPLOY_ISAR_BOOTSTRAP ?= ""
> > DISTRO_BOOTSTRAP_BASE_PACKAGES = "locales"
> > +# install early, so we can stub the update-initramfs script before
> > rootfs install
> > +DISTRO_BOOTSTRAP_BASE_PACKAGES:append = ",initramfs-tools"
> > DISTRO_BOOTSTRAP_BASE_PACKAGES:append:gnupg = ",gnupg"
> > DISTRO_BOOTSTRAP_BASE_PACKAGES:append:https-support = ",ca-
> > certificates"
> > DISTRO_VARS_PREFIX ?= "${@'HOST_' if
> > bb.utils.to_boolean(d.getVar('BOOTSTRAP_FOR_HOST')) else ''}"
>
--
Siemens AG, Technology
Linux Expert Center
--
You received this message because you are subscribed to the Google Groups "isar-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/isar-users/f7a61a93923ae99c083e1e36dbe136da2bd0228d.camel%40siemens.com.
next prev parent reply other threads:[~2024-09-18 13:16 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-17 9:15 [PATCH v2 RESEND 1/2] fix: copy boot files after finishing all rootfs operations 'Felix Moessbauer' via isar-users
2024-09-17 9:15 ` [PATCH v2 RESEND 2/2] delay creation of initrd until end of rootfs install 'Felix Moessbauer' via isar-users
2024-09-17 12:26 ` 'Jan Kiszka' via isar-users
2024-09-18 13:15 ` 'MOESSBAUER, Felix' via isar-users [this message]
2025-03-25 13:03 ` 'MOESSBAUER, Felix' via isar-users
2024-09-19 6:56 ` Uladzimir Bely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f7a61a93923ae99c083e1e36dbe136da2bd0228d.camel@siemens.com \
--to=isar-users@googlegroups.com \
--cc=felix.moessbauer@siemens.com \
--cc=jan.kiszka@siemens.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox