* [PATCH] meta: Generate WSL image for Windows Subsystem for Linux
@ 2026-08-06 7:07 'Clara Kowalsky' via isar-users
2026-08-06 7:49 ` 'MOESSBAUER, Felix' via isar-users
2026-08-10 10:37 ` Anton Mikanovich
0 siblings, 2 replies; 5+ messages in thread
From: 'Clara Kowalsky' via isar-users @ 2026-08-06 7:07 UTC (permalink / raw)
To: isar-users; +Cc: florian.bezdeka, Clara Kowalsky
This allows to generate a wsl file for Windows Subsystem for Linux.
The wsl image class adapts the rootfs for WSL: It creates /dev/pts/ptmx
because WSL needs that node before devpts is mounted. Without it, early
boot fails with forkpty errors. The class also removes /etc/resolv.conf,
as WSL manages it itself.
See https://learn.microsoft.com/en-us/windows/wsl/build-custom-distro#configuration-file-recommendations
The wsl-config recipe ships the configuration files /etc/wsl.conf and
/etc/wsl-distribution.conf as templates.
See https://learn.microsoft.com/en-us/windows/wsl/build-custom-distro#create-wsl-configuration-files
The variables in the configuration files can be overwritten in
downstream layers:
- WSL_DEFAULT_USER specifies which user runs when the WSL distro is
launched. Default: "root"
- WSL_DEFAULT_UID specifies the default UID used during first-run/OOBE
installation. Default: "0"
- WSL_DEFAULT_NAME specifies the name that the distro is registered
under. Default: "${DISTRO}-${MACHINE}"
Whole configuration files can be replaced or added by bbappending the
wsl-config recipe.
This was tested with WSL2, in plain Isar and in downstream layer.
Signed-off-by: Clara Kowalsky <clara.kowalsky@siemens.com>
---
doc/user_manual.md | 1 +
kas/machine/Kconfig | 8 ++++
kas/machine/wsl.yaml | 7 +++
meta-isar/conf/machine/wsl.conf | 16 +++++++
meta-isar/conf/mc.conf | 2 +
meta-isar/conf/multiconfig/wsl-bookworm.conf | 7 +++
meta-isar/conf/multiconfig/wsl-trixie.conf | 7 +++
meta/classes-recipe/image.bbclass | 2 +-
meta/classes-recipe/imagetypes_wsl.bbclass | 48 +++++++++++++++++++
.../wsl-config/files/etc/oobe.sh | 4 ++
.../files/etc/wsl-distribution.conf.tmpl | 6 +++
.../wsl-config/files/etc/wsl.conf.tmpl | 5 ++
.../wsl-config/wsl-config_0.1.bb | 37 ++++++++++++++
testsuite/citest.py | 2 +
14 files changed, 151 insertions(+), 1 deletion(-)
create mode 100644 kas/machine/wsl.yaml
create mode 100644 meta-isar/conf/machine/wsl.conf
create mode 100644 meta-isar/conf/multiconfig/wsl-bookworm.conf
create mode 100644 meta-isar/conf/multiconfig/wsl-trixie.conf
create mode 100644 meta/classes-recipe/imagetypes_wsl.bbclass
create mode 100644 meta/recipes-support/wsl-config/files/etc/oobe.sh
create mode 100644 meta/recipes-support/wsl-config/files/etc/wsl-distribution.conf.tmpl
create mode 100644 meta/recipes-support/wsl-config/files/etc/wsl.conf.tmpl
create mode 100644 meta/recipes-support/wsl-config/wsl-config_0.1.bb
diff --git a/doc/user_manual.md b/doc/user_manual.md
index dcc3f560..f3b1acb9 100644
--- a/doc/user_manual.md
+++ b/doc/user_manual.md
@@ -514,6 +514,7 @@ Currently, the following image types are provided:
- `ubi` - image for use on mtd nand partitions employing UBI
- `ubifs` - raw UBI filesystem image, normally used together with UBI partitions
- `ova` - Open Virtual Appliance: image for use on VirtualBox or VMware
+ - `wsl` - tar file for Windows Subsystem for Linux
- `squashfs` - raw squashfs filesystem image
- `fit` - FIT image as used by U-Boot
- `oci-archive`, `docker-archive`, `docker-daemon`, `containers-storage` - see [generating container images](#generate-container-image-with-root-filesystem)
diff --git a/kas/machine/Kconfig b/kas/machine/Kconfig
index 1e360be6..2895368c 100644
--- a/kas/machine/Kconfig
+++ b/kas/machine/Kconfig
@@ -253,6 +253,13 @@ config MACHINE_HYPER_V
select CODENAME_TRIXIE
select ARCH_AMD64
+config MACHINE_WSL
+ bool "wsl"
+ select DISTRO_DEBIAN
+ select CODENAME_BOOKWORM
+ select CODENAME_TRIXIE
+ select ARCH_AMD64
+
config MACHINE_X86_PC
bool "x86 PC"
select DISTRO_DEBIAN
@@ -297,6 +304,7 @@ config KAS_INCLUDE_MACHINE
default "kas/machine/virtualbox.yaml" if MACHINE_VIRTUALBOX
default "kas/machine/vmware.yaml" if MACHINE_VMWARE
default "kas/machine/hyper-v-amd64.yaml" if MACHINE_HYPER_V
+ default "kas/machine/wsl.yaml" if MACHINE_WSL
default "kas/machine/x86-pc.yaml" if MACHINE_X86_PC
endmenu
diff --git a/kas/machine/wsl.yaml b/kas/machine/wsl.yaml
new file mode 100644
index 00000000..f043b02a
--- /dev/null
+++ b/kas/machine/wsl.yaml
@@ -0,0 +1,7 @@
+# This software is a part of Isar.
+# Copyright (c) Siemens AG, 2026
+
+header:
+ version: 14
+
+machine: wsl
diff --git a/meta-isar/conf/machine/wsl.conf b/meta-isar/conf/machine/wsl.conf
new file mode 100644
index 00000000..086b0fe1
--- /dev/null
+++ b/meta-isar/conf/machine/wsl.conf
@@ -0,0 +1,16 @@
+# This software is a part of Isar.
+# Copyright (C) Siemens AG, 2026
+#
+# SPDX-License-Identifier: MIT
+
+DISTRO_ARCH ?= "amd64"
+
+# WSL uses the Windows-provided kernel
+KERNEL_NAME = ""
+
+IMAGE_FSTYPES ?= "wsl"
+
+# Configure rootfs for WSL boot
+IMAGE_INSTALL:append = " wsl-config"
+# Enable systemd-user session model
+IMAGE_PREINSTALL:append = " dbus dbus-user-session"
diff --git a/meta-isar/conf/mc.conf b/meta-isar/conf/mc.conf
index 649430a2..df3a38b0 100644
--- a/meta-isar/conf/mc.conf
+++ b/meta-isar/conf/mc.conf
@@ -89,4 +89,6 @@ BBMULTICONFIG = " \
qemuamd64-sid \
qemuarm64-sid \
qemuriscv64-resolute \
+ wsl-bookworm \
+ wsl-trixie \
"
diff --git a/meta-isar/conf/multiconfig/wsl-bookworm.conf b/meta-isar/conf/multiconfig/wsl-bookworm.conf
new file mode 100644
index 00000000..5e9f3697
--- /dev/null
+++ b/meta-isar/conf/multiconfig/wsl-bookworm.conf
@@ -0,0 +1,7 @@
+# This software is a part of Isar.
+# Copyright (C) Siemens AG, 2026
+#
+# SPDX-License-Identifier: MIT
+
+MACHINE ?= "wsl"
+DISTRO ?= "debian-bookworm"
diff --git a/meta-isar/conf/multiconfig/wsl-trixie.conf b/meta-isar/conf/multiconfig/wsl-trixie.conf
new file mode 100644
index 00000000..8ef796e4
--- /dev/null
+++ b/meta-isar/conf/multiconfig/wsl-trixie.conf
@@ -0,0 +1,7 @@
+# This software is a part of Isar.
+# Copyright (C) Siemens AG, 2026
+#
+# SPDX-License-Identifier: MIT
+
+MACHINE ?= "wsl"
+DISTRO ?= "debian-trixie"
diff --git a/meta/classes-recipe/image.bbclass b/meta/classes-recipe/image.bbclass
index d02f99da..0329c3f8 100644
--- a/meta/classes-recipe/image.bbclass
+++ b/meta/classes-recipe/image.bbclass
@@ -174,7 +174,7 @@ IMAGE_BASETYPES = "${@get_image_basetypes(d)}"
# image types
IMAGE_CLASSES ??= ""
-IMGCLASSES = "imagetypes imagetypes_wic imagetypes_vm imagetypes_container squashfs \
+IMGCLASSES = "imagetypes imagetypes_wic imagetypes_vm imagetypes_wsl imagetypes_container squashfs \
imagetypes_ddi"
IMGCLASSES += "${IMAGE_CLASSES}"
inherit ${IMGCLASSES}
diff --git a/meta/classes-recipe/imagetypes_wsl.bbclass b/meta/classes-recipe/imagetypes_wsl.bbclass
new file mode 100644
index 00000000..413c6a2d
--- /dev/null
+++ b/meta/classes-recipe/imagetypes_wsl.bbclass
@@ -0,0 +1,48 @@
+# This software is a part of Isar.
+# Copyright (C) Siemens AG, 2026
+#
+# SPDX-License-Identifier: MIT
+
+# This class allows to generate WSL import artifacts.
+#
+
+USING_WSL = "${@bb.utils.contains('IMAGE_BASETYPES', 'wsl', '1', '0', d)}"
+
+# WSL requires a static /dev/pts/ptmx during early boot
+ROOTFS_CONFIGURE_COMMAND += "${@bb.utils.contains('USING_WSL', '1', 'image_configure_wsl_ptmx', '', d)}"
+
+# The rootfs should not contain a /etc/resolv.conf
+# See https://learn.microsoft.com/en-us/windows/wsl/build-custom-distro#configuration-file-recommendations
+ROOTFS_POSTPROCESS_COMMAND += "${@bb.utils.contains('USING_WSL', '1', 'image_postprocess_wsl_cleanup', '', d)}"
+image_postprocess_wsl_cleanup[vardeps] += "WSL_CLEANUP_FILES"
+
+WSL_CLEANUP_FILES ?= " \
+ /etc/resolv.conf \
+"
+
+IMAGE_TYPEDEP:wsl = "tar.gz"
+
+IMAGE_CMD:wsl() {
+ cp -f "${DEPLOY_DIR_IMAGE}/${IMAGE_FULLNAME}.tar.gz" "${IMAGE_FILE_HOST}"
+}
+
+image_configure_wsl_ptmx() {
+ run_privileged_heredoc <<'EOSUDO'
+ set -e
+
+ mkdir -p "${ROOTFSDIR}/dev/pts"
+ if [ ! -e "${ROOTFSDIR}/dev/pts/ptmx" ]; then
+ mknod -m 000 "${ROOTFSDIR}/dev/pts/ptmx" c 5 2
+ fi
+EOSUDO
+}
+
+image_postprocess_wsl_cleanup() {
+ run_privileged_heredoc <<'EOSUDO'
+ set -e
+
+ for path in ${WSL_CLEANUP_FILES}; do
+ rm -f "${ROOTFSDIR}${path}"
+ done
+EOSUDO
+}
diff --git a/meta/recipes-support/wsl-config/files/etc/oobe.sh b/meta/recipes-support/wsl-config/files/etc/oobe.sh
new file mode 100644
index 00000000..e9ddfd16
--- /dev/null
+++ b/meta/recipes-support/wsl-config/files/etc/oobe.sh
@@ -0,0 +1,4 @@
+#! /usr/bin/bash
+
+# Generic OOBE hook for Isar-generated WSL images
+exit 0
diff --git a/meta/recipes-support/wsl-config/files/etc/wsl-distribution.conf.tmpl b/meta/recipes-support/wsl-config/files/etc/wsl-distribution.conf.tmpl
new file mode 100644
index 00000000..4f83314b
--- /dev/null
+++ b/meta/recipes-support/wsl-config/files/etc/wsl-distribution.conf.tmpl
@@ -0,0 +1,6 @@
+# See https://learn.microsoft.com/en-us/windows/wsl/build-custom-distro#add-the-wsl-distribution-configuration-file
+
+[oobe]
+command = /etc/oobe.sh
+defaultUid = ${WSL_DEFAULT_UID}
+defaultName = ${WSL_DEFAULT_NAME}
diff --git a/meta/recipes-support/wsl-config/files/etc/wsl.conf.tmpl b/meta/recipes-support/wsl-config/files/etc/wsl.conf.tmpl
new file mode 100644
index 00000000..862ca252
--- /dev/null
+++ b/meta/recipes-support/wsl-config/files/etc/wsl.conf.tmpl
@@ -0,0 +1,5 @@
+[boot]
+systemd=true
+
+[user]
+default=${WSL_DEFAULT_USER}
diff --git a/meta/recipes-support/wsl-config/wsl-config_0.1.bb b/meta/recipes-support/wsl-config/wsl-config_0.1.bb
new file mode 100644
index 00000000..2144c01b
--- /dev/null
+++ b/meta/recipes-support/wsl-config/wsl-config_0.1.bb
@@ -0,0 +1,37 @@
+# This software is a part of Isar.
+# Copyright (C) Siemens AG, 2026
+#
+# SPDX-License-Identifier: MIT
+
+inherit dpkg-raw
+
+DESCRIPTION = "WSL configuration files"
+MAINTAINER = "Clara Kowalsky <clara.kowalsky@siemens.com>"
+
+WSL_DEFAULT_USER ?= "root"
+WSL_DEFAULT_UID ?= "0"
+WSL_DEFAULT_NAME ?= "${DISTRO}-${MACHINE}"
+
+SRC_URI = " \
+ file://etc/oobe.sh \
+ file://etc/wsl.conf.tmpl \
+ file://etc/wsl-distribution.conf.tmpl \
+"
+
+TEMPLATE_FILES = " \
+ etc/wsl.conf.tmpl \
+ etc/wsl-distribution.conf.tmpl \
+"
+TEMPLATE_VARS += " \
+ WSL_DEFAULT_USER \
+ WSL_DEFAULT_UID \
+ WSL_DEFAULT_NAME \
+"
+
+do_install[cleandirs] += "${D}/etc"
+
+do_install() {
+ install -m 0644 "${WORKDIR}/etc/wsl.conf" "${D}/etc"
+ install -m 0644 "${WORKDIR}/etc/wsl-distribution.conf" "${D}/etc"
+ install -m 0755 "${WORKDIR}/etc/oobe.sh" "${D}/etc"
+}
diff --git a/testsuite/citest.py b/testsuite/citest.py
index a4f15d04..b13e27ed 100644
--- a/testsuite/citest.py
+++ b/testsuite/citest.py
@@ -904,6 +904,8 @@ class NoCrossTest(CIBaseTest):
'mc:qemuamd64-jammy:isar-image-base',
'mc:qemuarm64-jammy:isar-image-base',
'mc:x86-pc-bookworm:isar-image-base',
+ 'mc:wsl-bookworm:isar-image-base',
+ 'mc:wsl-trixie:isar-image-base',
]
self.init()
--
2.54.0
--
You received this message because you are subscribed to the Google Groups "isar-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com.
To view this discussion visit https://groups.google.com/d/msgid/isar-users/20260806070758.799362-1-clara.kowalsky%40siemens.com.
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] meta: Generate WSL image for Windows Subsystem for Linux 2026-08-06 7:07 [PATCH] meta: Generate WSL image for Windows Subsystem for Linux 'Clara Kowalsky' via isar-users @ 2026-08-06 7:49 ` 'MOESSBAUER, Felix' via isar-users 2026-08-12 9:26 ` 'Clara Kowalsky' via isar-users 2026-08-10 10:37 ` Anton Mikanovich 1 sibling, 1 reply; 5+ messages in thread From: 'MOESSBAUER, Felix' via isar-users @ 2026-08-06 7:49 UTC (permalink / raw) To: Kowalsky, Clara, isar-users; +Cc: Bezdeka, Florian On Thu, 2026-08-06 at 09:07 +0200, 'Clara Kowalsky' via isar-users wrote: > This allows to generate a wsl file for Windows Subsystem for Linux. > The wsl image class adapts the rootfs for WSL: It creates /dev/pts/ptmx > because WSL needs that node before devpts is mounted. > Without it, early > boot fails with forkpty errors. The class also removes /etc/resolv.conf, > as WSL manages it itself. > See https://learn.microsoft.com/en-us/windows/wsl/build-custom-distro#configuration-file-recommendations > > The wsl-config recipe ships the configuration files /etc/wsl.conf and > /etc/wsl-distribution.conf as templates. > See https://learn.microsoft.com/en-us/windows/wsl/build-custom-distro#create-wsl-configuration-files > > The variables in the configuration files can be overwritten in > downstream layers: > - WSL_DEFAULT_USER specifies which user runs when the WSL distro is > launched. Default: "root" > - WSL_DEFAULT_UID specifies the default UID used during first-run/OOBE > installation. Default: "0" > - WSL_DEFAULT_NAME specifies the name that the distro is registered > under. Default: "${DISTRO}-${MACHINE}" > Whole configuration files can be replaced or added by bbappending the > wsl-config recipe. > > This was tested with WSL2, in plain Isar and in downstream layer. > > Signed-off-by: Clara Kowalsky <clara.kowalsky@siemens.com> > --- > doc/user_manual.md | 1 + > kas/machine/Kconfig | 8 ++++ > kas/machine/wsl.yaml | 7 +++ > meta-isar/conf/machine/wsl.conf | 16 +++++++ > meta-isar/conf/mc.conf | 2 + > meta-isar/conf/multiconfig/wsl-bookworm.conf | 7 +++ > meta-isar/conf/multiconfig/wsl-trixie.conf | 7 +++ > meta/classes-recipe/image.bbclass | 2 +- > meta/classes-recipe/imagetypes_wsl.bbclass | 48 +++++++++++++++++++ > .../wsl-config/files/etc/oobe.sh | 4 ++ > .../files/etc/wsl-distribution.conf.tmpl | 6 +++ > .../wsl-config/files/etc/wsl.conf.tmpl | 5 ++ > .../wsl-config/wsl-config_0.1.bb | 37 ++++++++++++++ > testsuite/citest.py | 2 + > 14 files changed, 151 insertions(+), 1 deletion(-) > create mode 100644 kas/machine/wsl.yaml > create mode 100644 meta-isar/conf/machine/wsl.conf > create mode 100644 meta-isar/conf/multiconfig/wsl-bookworm.conf > create mode 100644 meta-isar/conf/multiconfig/wsl-trixie.conf > create mode 100644 meta/classes-recipe/imagetypes_wsl.bbclass > create mode 100644 meta/recipes-support/wsl-config/files/etc/oobe.sh > create mode 100644 meta/recipes-support/wsl-config/files/etc/wsl-distribution.conf.tmpl > create mode 100644 meta/recipes-support/wsl-config/files/etc/wsl.conf.tmpl > create mode 100644 meta/recipes-support/wsl-config/wsl-config_0.1.bb > > diff --git a/doc/user_manual.md b/doc/user_manual.md > index dcc3f560..f3b1acb9 100644 > --- a/doc/user_manual.md > +++ b/doc/user_manual.md > @@ -514,6 +514,7 @@ Currently, the following image types are provided: > - `ubi` - image for use on mtd nand partitions employing UBI > - `ubifs` - raw UBI filesystem image, normally used together with UBI partitions > - `ova` - Open Virtual Appliance: image for use on VirtualBox or VMware > + - `wsl` - tar file for Windows Subsystem for Linux > - `squashfs` - raw squashfs filesystem image > - `fit` - FIT image as used by U-Boot > - `oci-archive`, `docker-archive`, `docker-daemon`, `containers-storage` - see [generating container images](#generate-container-image-with-root-filesystem) > diff --git a/kas/machine/Kconfig b/kas/machine/Kconfig > index 1e360be6..2895368c 100644 > --- a/kas/machine/Kconfig > +++ b/kas/machine/Kconfig > @@ -253,6 +253,13 @@ config MACHINE_HYPER_V > select CODENAME_TRIXIE > select ARCH_AMD64 > > +config MACHINE_WSL > + bool "wsl" > + select DISTRO_DEBIAN > + select CODENAME_BOOKWORM > + select CODENAME_TRIXIE > + select ARCH_AMD64 > + > config MACHINE_X86_PC > bool "x86 PC" > select DISTRO_DEBIAN > @@ -297,6 +304,7 @@ config KAS_INCLUDE_MACHINE > default "kas/machine/virtualbox.yaml" if MACHINE_VIRTUALBOX > default "kas/machine/vmware.yaml" if MACHINE_VMWARE > default "kas/machine/hyper-v-amd64.yaml" if MACHINE_HYPER_V > + default "kas/machine/wsl.yaml" if MACHINE_WSL > default "kas/machine/x86-pc.yaml" if MACHINE_X86_PC > > endmenu > diff --git a/kas/machine/wsl.yaml b/kas/machine/wsl.yaml > new file mode 100644 > index 00000000..f043b02a > --- /dev/null > +++ b/kas/machine/wsl.yaml > @@ -0,0 +1,7 @@ > +# This software is a part of Isar. > +# Copyright (c) Siemens AG, 2026 > + > +header: > + version: 14 > + > +machine: wsl > diff --git a/meta-isar/conf/machine/wsl.conf b/meta-isar/conf/machine/wsl.conf > new file mode 100644 > index 00000000..086b0fe1 > --- /dev/null > +++ b/meta-isar/conf/machine/wsl.conf > @@ -0,0 +1,16 @@ > +# This software is a part of Isar. > +# Copyright (C) Siemens AG, 2026 > +# > +# SPDX-License-Identifier: MIT > + > +DISTRO_ARCH ?= "amd64" > + > +# WSL uses the Windows-provided kernel > +KERNEL_NAME = "" > + > +IMAGE_FSTYPES ?= "wsl" > + > +# Configure rootfs for WSL boot > +IMAGE_INSTALL:append = " wsl-config" > +# Enable systemd-user session model > +IMAGE_PREINSTALL:append = " dbus dbus-user-session" > diff --git a/meta-isar/conf/mc.conf b/meta-isar/conf/mc.conf > index 649430a2..df3a38b0 100644 > --- a/meta-isar/conf/mc.conf > +++ b/meta-isar/conf/mc.conf > @@ -89,4 +89,6 @@ BBMULTICONFIG = " \ > qemuamd64-sid \ > qemuarm64-sid \ > qemuriscv64-resolute \ > + wsl-bookworm \ > + wsl-trixie \ > " > diff --git a/meta-isar/conf/multiconfig/wsl-bookworm.conf b/meta-isar/conf/multiconfig/wsl-bookworm.conf > new file mode 100644 > index 00000000..5e9f3697 > --- /dev/null > +++ b/meta-isar/conf/multiconfig/wsl-bookworm.conf > @@ -0,0 +1,7 @@ > +# This software is a part of Isar. > +# Copyright (C) Siemens AG, 2026 > +# > +# SPDX-License-Identifier: MIT > + > +MACHINE ?= "wsl" > +DISTRO ?= "debian-bookworm" > diff --git a/meta-isar/conf/multiconfig/wsl-trixie.conf b/meta-isar/conf/multiconfig/wsl-trixie.conf > new file mode 100644 > index 00000000..8ef796e4 > --- /dev/null > +++ b/meta-isar/conf/multiconfig/wsl-trixie.conf > @@ -0,0 +1,7 @@ > +# This software is a part of Isar. > +# Copyright (C) Siemens AG, 2026 > +# > +# SPDX-License-Identifier: MIT > + > +MACHINE ?= "wsl" > +DISTRO ?= "debian-trixie" > diff --git a/meta/classes-recipe/image.bbclass b/meta/classes-recipe/image.bbclass > index d02f99da..0329c3f8 100644 > --- a/meta/classes-recipe/image.bbclass > +++ b/meta/classes-recipe/image.bbclass > @@ -174,7 +174,7 @@ IMAGE_BASETYPES = "${@get_image_basetypes(d)}" > > # image types > IMAGE_CLASSES ??= "" > -IMGCLASSES = "imagetypes imagetypes_wic imagetypes_vm imagetypes_container squashfs \ > +IMGCLASSES = "imagetypes imagetypes_wic imagetypes_vm imagetypes_wsl imagetypes_container squashfs \ > imagetypes_ddi" > IMGCLASSES += "${IMAGE_CLASSES}" > inherit ${IMGCLASSES} > diff --git a/meta/classes-recipe/imagetypes_wsl.bbclass b/meta/classes-recipe/imagetypes_wsl.bbclass > new file mode 100644 > index 00000000..413c6a2d > --- /dev/null > +++ b/meta/classes-recipe/imagetypes_wsl.bbclass > @@ -0,0 +1,48 @@ > +# This software is a part of Isar. > +# Copyright (C) Siemens AG, 2026 > +# > +# SPDX-License-Identifier: MIT > + > +# This class allows to generate WSL import artifacts. > +# > + > +USING_WSL = "${@bb.utils.contains('IMAGE_BASETYPES', 'wsl', '1', '0', d)}" > + > +# WSL requires a static /dev/pts/ptmx during early boot > +ROOTFS_CONFIGURE_COMMAND += "${@bb.utils.contains('USING_WSL', '1', 'image_configure_wsl_ptmx', '', d)}" > + > +# The rootfs should not contain a /etc/resolv.conf > +# See https://learn.microsoft.com/en-us/windows/wsl/build-custom-distro#configuration-file-recommendations > +ROOTFS_POSTPROCESS_COMMAND += "${@bb.utils.contains('USING_WSL', '1', 'image_postprocess_wsl_cleanup', '', d)}" > +image_postprocess_wsl_cleanup[vardeps] += "WSL_CLEANUP_FILES" > + > +WSL_CLEANUP_FILES ?= " \ > + /etc/resolv.conf \ > +" Hi, this file is already in ROOTFS_CLEAN_FILES. By that, it should be cleaned (but I'm wondering if rootfs_install_clean_files is running too early). Please fix the existing logic (if needed) instead of introducing a new one. Apart from that, the image type must not alter the rootfs itself, but instead create a new (modified) copy. > + > +IMAGE_TYPEDEP:wsl = "tar.gz" Depend on the tar instead of tar.gz, then you can easily apply the modifications while repacking > + > +IMAGE_CMD:wsl() { > + cp -f "${DEPLOY_DIR_IMAGE}/${IMAGE_FULLNAME}.tar.gz" "${IMAGE_FILE_HOST}" Here you could apply the filter by doing something like (untested) cat ${DEPLOY_DIR_IMAGE}/${IMAGE_FULLNAME}.tar.gz | tar --delete /etc/resolv.conf | gz > ${IMAGE_FILE_HOST} > +} > + > +image_configure_wsl_ptmx() { > + run_privileged_heredoc <<'EOSUDO' > + set -e > + > + mkdir -p "${ROOTFSDIR}/dev/pts" > + if [ ! -e "${ROOTFSDIR}/dev/pts/ptmx" ]; then > + mknod -m 000 "${ROOTFSDIR}/dev/pts/ptmx" c 5 2 > + fi > +EOSUDO > +} > + > +image_postprocess_wsl_cleanup() { > + run_privileged_heredoc <<'EOSUDO' > + set -e > + > + for path in ${WSL_CLEANUP_FILES}; do > + rm -f "${ROOTFSDIR}${path}" > + done > +EOSUDO > > > +} This does not work, as the final image is deployed with an empty /dev (since "image: delete entries below /dev"). But it also should not be needed, as systemd mounts a devpts on /dev/pts and sets up the symlinks. Felix > diff --git a/meta/recipes-support/wsl-config/files/etc/oobe.sh b/meta/recipes-support/wsl-config/files/etc/oobe.sh > new file mode 100644 > index 00000000..e9ddfd16 > --- /dev/null > +++ b/meta/recipes-support/wsl-config/files/etc/oobe.sh > @@ -0,0 +1,4 @@ > +#! /usr/bin/bash > + > +# Generic OOBE hook for Isar-generated WSL images > +exit 0 > diff --git a/meta/recipes-support/wsl-config/files/etc/wsl-distribution.conf.tmpl b/meta/recipes-support/wsl-config/files/etc/wsl-distribution.conf.tmpl > new file mode 100644 > index 00000000..4f83314b > --- /dev/null > +++ b/meta/recipes-support/wsl-config/files/etc/wsl-distribution.conf.tmpl > @@ -0,0 +1,6 @@ > +# See https://learn.microsoft.com/en-us/windows/wsl/build-custom-distro#add-the-wsl-distribution-configuration-file > + > +[oobe] > +command = /etc/oobe.sh > +defaultUid = ${WSL_DEFAULT_UID} > +defaultName = ${WSL_DEFAULT_NAME} > diff --git a/meta/recipes-support/wsl-config/files/etc/wsl.conf.tmpl b/meta/recipes-support/wsl-config/files/etc/wsl.conf.tmpl > new file mode 100644 > index 00000000..862ca252 > --- /dev/null > +++ b/meta/recipes-support/wsl-config/files/etc/wsl.conf.tmpl > @@ -0,0 +1,5 @@ > +[boot] > +systemd=true > + > +[user] > +default=${WSL_DEFAULT_USER} > diff --git a/meta/recipes-support/wsl-config/wsl-config_0.1.bb b/meta/recipes-support/wsl-config/wsl-config_0.1.bb > new file mode 100644 > index 00000000..2144c01b > --- /dev/null > +++ b/meta/recipes-support/wsl-config/wsl-config_0.1.bb > @@ -0,0 +1,37 @@ > +# This software is a part of Isar. > +# Copyright (C) Siemens AG, 2026 > +# > +# SPDX-License-Identifier: MIT > + > +inherit dpkg-raw > + > +DESCRIPTION = "WSL configuration files" > +MAINTAINER = "Clara Kowalsky <clara.kowalsky@siemens.com>" > + > +WSL_DEFAULT_USER ?= "root" > +WSL_DEFAULT_UID ?= "0" > +WSL_DEFAULT_NAME ?= "${DISTRO}-${MACHINE}" > + > +SRC_URI = " \ > + file://etc/oobe.sh \ > + file://etc/wsl.conf.tmpl \ > + file://etc/wsl-distribution.conf.tmpl \ > +" > + > +TEMPLATE_FILES = " \ > + etc/wsl.conf.tmpl \ > + etc/wsl-distribution.conf.tmpl \ > +" > +TEMPLATE_VARS += " \ > + WSL_DEFAULT_USER \ > + WSL_DEFAULT_UID \ > + WSL_DEFAULT_NAME \ > +" > + > +do_install[cleandirs] += "${D}/etc" > + > +do_install() { > + install -m 0644 "${WORKDIR}/etc/wsl.conf" "${D}/etc" > + install -m 0644 "${WORKDIR}/etc/wsl-distribution.conf" "${D}/etc" > + install -m 0755 "${WORKDIR}/etc/oobe.sh" "${D}/etc" > +} > diff --git a/testsuite/citest.py b/testsuite/citest.py > index a4f15d04..b13e27ed 100644 > --- a/testsuite/citest.py > +++ b/testsuite/citest.py > @@ -904,6 +904,8 @@ class NoCrossTest(CIBaseTest): > 'mc:qemuamd64-jammy:isar-image-base', > 'mc:qemuarm64-jammy:isar-image-base', > 'mc:x86-pc-bookworm:isar-image-base', > + 'mc:wsl-bookworm:isar-image-base', > + 'mc:wsl-trixie:isar-image-base', > ] > > self.init() > -- > 2.54.0 > > -- > You received this message because you are subscribed to the Google Groups "isar-users" group. > To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com. > To view this discussion visit https://groups.google.com/d/msgid/isar-users/20260806070758.799362-1-clara.kowalsky%40siemens.com. -- You received this message because you are subscribed to the Google Groups "isar-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/isar-users/0e174134599bab9945c111769c0a8f7a4ce703a6.camel%40siemens.com. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] meta: Generate WSL image for Windows Subsystem for Linux 2026-08-06 7:49 ` 'MOESSBAUER, Felix' via isar-users @ 2026-08-12 9:26 ` 'Clara Kowalsky' via isar-users 0 siblings, 0 replies; 5+ messages in thread From: 'Clara Kowalsky' via isar-users @ 2026-08-12 9:26 UTC (permalink / raw) To: Moessbauer, Felix (FT RPD CED OES-DE), isar-users Cc: Bezdeka, Florian (FT RPD CED OES-DE) On 8/6/26 09:49, Moessbauer, Felix (FT RPD CED OES-DE) wrote: > On Thu, 2026-08-06 at 09:07 +0200, 'Clara Kowalsky' via isar-users > wrote: >> This allows to generate a wsl file for Windows Subsystem for Linux. >> The wsl image class adapts the rootfs for WSL: It creates /dev/pts/ptmx >> because WSL needs that node before devpts is mounted. >> Without it, early >> boot fails with forkpty errors. The class also removes /etc/resolv.conf, >> as WSL manages it itself. >> See https://learn.microsoft.com/en-us/windows/wsl/build-custom-distro#configuration-file-recommendations >> >> The wsl-config recipe ships the configuration files /etc/wsl.conf and >> /etc/wsl-distribution.conf as templates. >> See https://learn.microsoft.com/en-us/windows/wsl/build-custom-distro#create-wsl-configuration-files >> >> The variables in the configuration files can be overwritten in >> downstream layers: >> - WSL_DEFAULT_USER specifies which user runs when the WSL distro is >> launched. Default: "root" >> - WSL_DEFAULT_UID specifies the default UID used during first-run/OOBE >> installation. Default: "0" >> - WSL_DEFAULT_NAME specifies the name that the distro is registered >> under. Default: "${DISTRO}-${MACHINE}" >> Whole configuration files can be replaced or added by bbappending the >> wsl-config recipe. >> >> This was tested with WSL2, in plain Isar and in downstream layer. >> >> Signed-off-by: Clara Kowalsky <clara.kowalsky@siemens.com> >> --- >> doc/user_manual.md | 1 + >> kas/machine/Kconfig | 8 ++++ >> kas/machine/wsl.yaml | 7 +++ >> meta-isar/conf/machine/wsl.conf | 16 +++++++ >> meta-isar/conf/mc.conf | 2 + >> meta-isar/conf/multiconfig/wsl-bookworm.conf | 7 +++ >> meta-isar/conf/multiconfig/wsl-trixie.conf | 7 +++ >> meta/classes-recipe/image.bbclass | 2 +- >> meta/classes-recipe/imagetypes_wsl.bbclass | 48 +++++++++++++++++++ >> .../wsl-config/files/etc/oobe.sh | 4 ++ >> .../files/etc/wsl-distribution.conf.tmpl | 6 +++ >> .../wsl-config/files/etc/wsl.conf.tmpl | 5 ++ >> .../wsl-config/wsl-config_0.1.bb | 37 ++++++++++++++ >> testsuite/citest.py | 2 + >> 14 files changed, 151 insertions(+), 1 deletion(-) >> create mode 100644 kas/machine/wsl.yaml >> create mode 100644 meta-isar/conf/machine/wsl.conf >> create mode 100644 meta-isar/conf/multiconfig/wsl-bookworm.conf >> create mode 100644 meta-isar/conf/multiconfig/wsl-trixie.conf >> create mode 100644 meta/classes-recipe/imagetypes_wsl.bbclass >> create mode 100644 meta/recipes-support/wsl-config/files/etc/oobe.sh >> create mode 100644 meta/recipes-support/wsl-config/files/etc/wsl-distribution.conf.tmpl >> create mode 100644 meta/recipes-support/wsl-config/files/etc/wsl.conf.tmpl >> create mode 100644 meta/recipes-support/wsl-config/wsl-config_0.1.bb >> >> diff --git a/doc/user_manual.md b/doc/user_manual.md >> index dcc3f560..f3b1acb9 100644 >> --- a/doc/user_manual.md >> +++ b/doc/user_manual.md >> @@ -514,6 +514,7 @@ Currently, the following image types are provided: >> - `ubi` - image for use on mtd nand partitions employing UBI >> - `ubifs` - raw UBI filesystem image, normally used together with UBI partitions >> - `ova` - Open Virtual Appliance: image for use on VirtualBox or VMware >> + - `wsl` - tar file for Windows Subsystem for Linux >> - `squashfs` - raw squashfs filesystem image >> - `fit` - FIT image as used by U-Boot >> - `oci-archive`, `docker-archive`, `docker-daemon`, `containers-storage` - see [generating container images](#generate-container-image-with-root-filesystem) >> diff --git a/kas/machine/Kconfig b/kas/machine/Kconfig >> index 1e360be6..2895368c 100644 >> --- a/kas/machine/Kconfig >> +++ b/kas/machine/Kconfig >> @@ -253,6 +253,13 @@ config MACHINE_HYPER_V >> select CODENAME_TRIXIE >> select ARCH_AMD64 >> >> +config MACHINE_WSL >> + bool "wsl" >> + select DISTRO_DEBIAN >> + select CODENAME_BOOKWORM >> + select CODENAME_TRIXIE >> + select ARCH_AMD64 >> + >> config MACHINE_X86_PC >> bool "x86 PC" >> select DISTRO_DEBIAN >> @@ -297,6 +304,7 @@ config KAS_INCLUDE_MACHINE >> default "kas/machine/virtualbox.yaml" if MACHINE_VIRTUALBOX >> default "kas/machine/vmware.yaml" if MACHINE_VMWARE >> default "kas/machine/hyper-v-amd64.yaml" if MACHINE_HYPER_V >> + default "kas/machine/wsl.yaml" if MACHINE_WSL >> default "kas/machine/x86-pc.yaml" if MACHINE_X86_PC >> >> endmenu >> diff --git a/kas/machine/wsl.yaml b/kas/machine/wsl.yaml >> new file mode 100644 >> index 00000000..f043b02a >> --- /dev/null >> +++ b/kas/machine/wsl.yaml >> @@ -0,0 +1,7 @@ >> +# This software is a part of Isar. >> +# Copyright (c) Siemens AG, 2026 >> + >> +header: >> + version: 14 >> + >> +machine: wsl >> diff --git a/meta-isar/conf/machine/wsl.conf b/meta-isar/conf/machine/wsl.conf >> new file mode 100644 >> index 00000000..086b0fe1 >> --- /dev/null >> +++ b/meta-isar/conf/machine/wsl.conf >> @@ -0,0 +1,16 @@ >> +# This software is a part of Isar. >> +# Copyright (C) Siemens AG, 2026 >> +# >> +# SPDX-License-Identifier: MIT >> + >> +DISTRO_ARCH ?= "amd64" >> + >> +# WSL uses the Windows-provided kernel >> +KERNEL_NAME = "" >> + >> +IMAGE_FSTYPES ?= "wsl" >> + >> +# Configure rootfs for WSL boot >> +IMAGE_INSTALL:append = " wsl-config" >> +# Enable systemd-user session model >> +IMAGE_PREINSTALL:append = " dbus dbus-user-session" >> diff --git a/meta-isar/conf/mc.conf b/meta-isar/conf/mc.conf >> index 649430a2..df3a38b0 100644 >> --- a/meta-isar/conf/mc.conf >> +++ b/meta-isar/conf/mc.conf >> @@ -89,4 +89,6 @@ BBMULTICONFIG = " \ >> qemuamd64-sid \ >> qemuarm64-sid \ >> qemuriscv64-resolute \ >> + wsl-bookworm \ >> + wsl-trixie \ >> " >> diff --git a/meta-isar/conf/multiconfig/wsl-bookworm.conf b/meta-isar/conf/multiconfig/wsl-bookworm.conf >> new file mode 100644 >> index 00000000..5e9f3697 >> --- /dev/null >> +++ b/meta-isar/conf/multiconfig/wsl-bookworm.conf >> @@ -0,0 +1,7 @@ >> +# This software is a part of Isar. >> +# Copyright (C) Siemens AG, 2026 >> +# >> +# SPDX-License-Identifier: MIT >> + >> +MACHINE ?= "wsl" >> +DISTRO ?= "debian-bookworm" >> diff --git a/meta-isar/conf/multiconfig/wsl-trixie.conf b/meta-isar/conf/multiconfig/wsl-trixie.conf >> new file mode 100644 >> index 00000000..8ef796e4 >> --- /dev/null >> +++ b/meta-isar/conf/multiconfig/wsl-trixie.conf >> @@ -0,0 +1,7 @@ >> +# This software is a part of Isar. >> +# Copyright (C) Siemens AG, 2026 >> +# >> +# SPDX-License-Identifier: MIT >> + >> +MACHINE ?= "wsl" >> +DISTRO ?= "debian-trixie" >> diff --git a/meta/classes-recipe/image.bbclass b/meta/classes-recipe/image.bbclass >> index d02f99da..0329c3f8 100644 >> --- a/meta/classes-recipe/image.bbclass >> +++ b/meta/classes-recipe/image.bbclass >> @@ -174,7 +174,7 @@ IMAGE_BASETYPES = "${@get_image_basetypes(d)}" >> >> # image types >> IMAGE_CLASSES ??= "" >> -IMGCLASSES = "imagetypes imagetypes_wic imagetypes_vm imagetypes_container squashfs \ >> +IMGCLASSES = "imagetypes imagetypes_wic imagetypes_vm imagetypes_wsl imagetypes_container squashfs \ >> imagetypes_ddi" >> IMGCLASSES += "${IMAGE_CLASSES}" >> inherit ${IMGCLASSES} >> diff --git a/meta/classes-recipe/imagetypes_wsl.bbclass b/meta/classes-recipe/imagetypes_wsl.bbclass >> new file mode 100644 >> index 00000000..413c6a2d >> --- /dev/null >> +++ b/meta/classes-recipe/imagetypes_wsl.bbclass >> @@ -0,0 +1,48 @@ >> +# This software is a part of Isar. >> +# Copyright (C) Siemens AG, 2026 >> +# >> +# SPDX-License-Identifier: MIT >> + >> +# This class allows to generate WSL import artifacts. >> +# >> + >> +USING_WSL = "${@bb.utils.contains('IMAGE_BASETYPES', 'wsl', '1', '0', d)}" >> + >> +# WSL requires a static /dev/pts/ptmx during early boot >> +ROOTFS_CONFIGURE_COMMAND += "${@bb.utils.contains('USING_WSL', '1', 'image_configure_wsl_ptmx', '', d)}" >> + >> +# The rootfs should not contain a /etc/resolv.conf >> +# See https://learn.microsoft.com/en-us/windows/wsl/build-custom-distro#configuration-file-recommendations >> +ROOTFS_POSTPROCESS_COMMAND += "${@bb.utils.contains('USING_WSL', '1', 'image_postprocess_wsl_cleanup', '', d)}" >> +image_postprocess_wsl_cleanup[vardeps] += "WSL_CLEANUP_FILES" >> + >> +WSL_CLEANUP_FILES ?= " \ >> + /etc/resolv.conf \ >> +" > > Hi, > > this file is already in ROOTFS_CLEAN_FILES. By that, it should be > cleaned (but I'm wondering if rootfs_install_clean_files is running too > early). Please fix the existing logic (if needed) instead of > introducing a new one. > Hi, I checked this and the cleanup was a leftover from very initial wsl testing in a layer that depended on isar-cip-core, causing KERNEL_NAME="cip" to be set for the wsl build. I removed that in a v2. rootfs_install_clean_files is running at the right time in my 3 test scenarios, so no need to place it later. Clara > Apart from that, the image type must not alter the rootfs itself, but > instead create a new (modified) copy. > > >> + >> +IMAGE_TYPEDEP:wsl = "tar.gz" > > Depend on the tar instead of tar.gz, then you can easily apply the > modifications while repacking > >> + >> +IMAGE_CMD:wsl() { >> + cp -f "${DEPLOY_DIR_IMAGE}/${IMAGE_FULLNAME}.tar.gz" "${IMAGE_FILE_HOST}" > > Here you could apply the filter by doing something like (untested) > > cat ${DEPLOY_DIR_IMAGE}/${IMAGE_FULLNAME}.tar.gz | tar --delete > /etc/resolv.conf | gz > ${IMAGE_FILE_HOST} > >> +} >> + >> +image_configure_wsl_ptmx() { >> + run_privileged_heredoc <<'EOSUDO' >> + set -e >> + >> + mkdir -p "${ROOTFSDIR}/dev/pts" >> + if [ ! -e "${ROOTFSDIR}/dev/pts/ptmx" ]; then >> + mknod -m 000 "${ROOTFSDIR}/dev/pts/ptmx" c 5 2 >> + fi >> +EOSUDO >> +} >> + >> +image_postprocess_wsl_cleanup() { >> + run_privileged_heredoc <<'EOSUDO' >> + set -e >> + >> + for path in ${WSL_CLEANUP_FILES}; do >> + rm -f "${ROOTFSDIR}${path}" >> + done >> +EOSUDO >> >> >> +} > > This does not work, as the final image is deployed with an empty /dev > (since "image: delete entries below /dev"). But it also should not be > needed, as systemd mounts a devpts on /dev/pts and sets up the > symlinks. > > Felix > >> diff --git a/meta/recipes-support/wsl-config/files/etc/oobe.sh b/meta/recipes-support/wsl-config/files/etc/oobe.sh >> new file mode 100644 >> index 00000000..e9ddfd16 >> --- /dev/null >> +++ b/meta/recipes-support/wsl-config/files/etc/oobe.sh >> @@ -0,0 +1,4 @@ >> +#! /usr/bin/bash >> + >> +# Generic OOBE hook for Isar-generated WSL images >> +exit 0 >> diff --git a/meta/recipes-support/wsl-config/files/etc/wsl-distribution.conf.tmpl b/meta/recipes-support/wsl-config/files/etc/wsl-distribution.conf.tmpl >> new file mode 100644 >> index 00000000..4f83314b >> --- /dev/null >> +++ b/meta/recipes-support/wsl-config/files/etc/wsl-distribution.conf.tmpl >> @@ -0,0 +1,6 @@ >> +# See https://learn.microsoft.com/en-us/windows/wsl/build-custom-distro#add-the-wsl-distribution-configuration-file >> + >> +[oobe] >> +command = /etc/oobe.sh >> +defaultUid = ${WSL_DEFAULT_UID} >> +defaultName = ${WSL_DEFAULT_NAME} >> diff --git a/meta/recipes-support/wsl-config/files/etc/wsl.conf.tmpl b/meta/recipes-support/wsl-config/files/etc/wsl.conf.tmpl >> new file mode 100644 >> index 00000000..862ca252 >> --- /dev/null >> +++ b/meta/recipes-support/wsl-config/files/etc/wsl.conf.tmpl >> @@ -0,0 +1,5 @@ >> +[boot] >> +systemd=true >> + >> +[user] >> +default=${WSL_DEFAULT_USER} >> diff --git a/meta/recipes-support/wsl-config/wsl-config_0.1.bb b/meta/recipes-support/wsl-config/wsl-config_0.1.bb >> new file mode 100644 >> index 00000000..2144c01b >> --- /dev/null >> +++ b/meta/recipes-support/wsl-config/wsl-config_0.1.bb >> @@ -0,0 +1,37 @@ >> +# This software is a part of Isar. >> +# Copyright (C) Siemens AG, 2026 >> +# >> +# SPDX-License-Identifier: MIT >> + >> +inherit dpkg-raw >> + >> +DESCRIPTION = "WSL configuration files" >> +MAINTAINER = "Clara Kowalsky <clara.kowalsky@siemens.com>" >> + >> +WSL_DEFAULT_USER ?= "root" >> +WSL_DEFAULT_UID ?= "0" >> +WSL_DEFAULT_NAME ?= "${DISTRO}-${MACHINE}" >> + >> +SRC_URI = " \ >> + file://etc/oobe.sh \ >> + file://etc/wsl.conf.tmpl \ >> + file://etc/wsl-distribution.conf.tmpl \ >> +" >> + >> +TEMPLATE_FILES = " \ >> + etc/wsl.conf.tmpl \ >> + etc/wsl-distribution.conf.tmpl \ >> +" >> +TEMPLATE_VARS += " \ >> + WSL_DEFAULT_USER \ >> + WSL_DEFAULT_UID \ >> + WSL_DEFAULT_NAME \ >> +" >> + >> +do_install[cleandirs] += "${D}/etc" >> + >> +do_install() { >> + install -m 0644 "${WORKDIR}/etc/wsl.conf" "${D}/etc" >> + install -m 0644 "${WORKDIR}/etc/wsl-distribution.conf" "${D}/etc" >> + install -m 0755 "${WORKDIR}/etc/oobe.sh" "${D}/etc" >> +} >> diff --git a/testsuite/citest.py b/testsuite/citest.py >> index a4f15d04..b13e27ed 100644 >> --- a/testsuite/citest.py >> +++ b/testsuite/citest.py >> @@ -904,6 +904,8 @@ class NoCrossTest(CIBaseTest): >> 'mc:qemuamd64-jammy:isar-image-base', >> 'mc:qemuarm64-jammy:isar-image-base', >> 'mc:x86-pc-bookworm:isar-image-base', >> + 'mc:wsl-bookworm:isar-image-base', >> + 'mc:wsl-trixie:isar-image-base', >> ] >> >> self.init() >> -- >> 2.54.0 >> >> -- >> You received this message because you are subscribed to the Google Groups "isar-users" group. >> To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com. >> To view this discussion visit https://groups.google.com/d/msgid/isar-users/20260806070758.799362-1-clara.kowalsky%40siemens.com. > -- You received this message because you are subscribed to the Google Groups "isar-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/isar-users/dbdbf786-c1b0-4a53-a77b-5f77b5cdb522%40siemens.com. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] meta: Generate WSL image for Windows Subsystem for Linux 2026-08-06 7:07 [PATCH] meta: Generate WSL image for Windows Subsystem for Linux 'Clara Kowalsky' via isar-users 2026-08-06 7:49 ` 'MOESSBAUER, Felix' via isar-users @ 2026-08-10 10:37 ` Anton Mikanovich 2026-08-12 9:59 ` 'Clara Kowalsky' via isar-users 1 sibling, 1 reply; 5+ messages in thread From: Anton Mikanovich @ 2026-08-10 10:37 UTC (permalink / raw) To: Clara Kowalsky, isar-users; +Cc: florian.bezdeka 06.08.2026 10:07, 'Clara Kowalsky' via isar-users wrote: > This allows to generate a wsl file for Windows Subsystem for Linux. > The wsl image class adapts the rootfs for WSL: It creates /dev/pts/ptmx > because WSL needs that node before devpts is mounted. Without it, early > boot fails with forkpty errors. The class also removes /etc/resolv.conf, > as WSL manages it itself. > See https://learn.microsoft.com/en-us/windows/wsl/build-custom-distro#configuration-file-recommendations > > The wsl-config recipe ships the configuration files /etc/wsl.conf and > /etc/wsl-distribution.conf as templates. > See https://learn.microsoft.com/en-us/windows/wsl/build-custom-distro#create-wsl-configuration-files > > The variables in the configuration files can be overwritten in > downstream layers: > - WSL_DEFAULT_USER specifies which user runs when the WSL distro is > launched. Default: "root" > - WSL_DEFAULT_UID specifies the default UID used during first-run/OOBE > installation. Default: "0" > - WSL_DEFAULT_NAME specifies the name that the distro is registered > under. Default: "${DISTRO}-${MACHINE}" > Whole configuration files can be replaced or added by bbappending the > wsl-config recipe. > > This was tested with WSL2, in plain Isar and in downstream layer. > > Signed-off-by: Clara Kowalsky <clara.kowalsky@siemens.com> > --- > doc/user_manual.md | 1 + > kas/machine/Kconfig | 8 ++++ > kas/machine/wsl.yaml | 7 +++ > meta-isar/conf/machine/wsl.conf | 16 +++++++ > meta-isar/conf/mc.conf | 2 + > meta-isar/conf/multiconfig/wsl-bookworm.conf | 7 +++ > meta-isar/conf/multiconfig/wsl-trixie.conf | 7 +++ > meta/classes-recipe/image.bbclass | 2 +- > meta/classes-recipe/imagetypes_wsl.bbclass | 48 +++++++++++++++++++ > .../wsl-config/files/etc/oobe.sh | 4 ++ > .../files/etc/wsl-distribution.conf.tmpl | 6 +++ > .../wsl-config/files/etc/wsl.conf.tmpl | 5 ++ > .../wsl-config/wsl-config_0.1.bb | 37 ++++++++++++++ > testsuite/citest.py | 2 + > 14 files changed, 151 insertions(+), 1 deletion(-) > create mode 100644 kas/machine/wsl.yaml > create mode 100644 meta-isar/conf/machine/wsl.conf > create mode 100644 meta-isar/conf/multiconfig/wsl-bookworm.conf > create mode 100644 meta-isar/conf/multiconfig/wsl-trixie.conf > create mode 100644 meta/classes-recipe/imagetypes_wsl.bbclass > create mode 100644 meta/recipes-support/wsl-config/files/etc/oobe.sh > create mode 100644 meta/recipes-support/wsl-config/files/etc/wsl-distribution.conf.tmpl > create mode 100644 meta/recipes-support/wsl-config/files/etc/wsl.conf.tmpl > create mode 100644 meta/recipes-support/wsl-config/wsl-config_0.1.bb > > diff --git a/doc/user_manual.md b/doc/user_manual.md > index dcc3f560..f3b1acb9 100644 > --- a/doc/user_manual.md > +++ b/doc/user_manual.md > @@ -514,6 +514,7 @@ Currently, the following image types are provided: > - `ubi` - image for use on mtd nand partitions employing UBI > - `ubifs` - raw UBI filesystem image, normally used together with UBI partitions > - `ova` - Open Virtual Appliance: image for use on VirtualBox or VMware > + - `wsl` - tar file for Windows Subsystem for Linux > - `squashfs` - raw squashfs filesystem image > - `fit` - FIT image as used by U-Boot > - `oci-archive`, `docker-archive`, `docker-daemon`, `containers-storage` - see [generating container images](#generate-container-image-with-root-filesystem) > diff --git a/kas/machine/Kconfig b/kas/machine/Kconfig > index 1e360be6..2895368c 100644 > --- a/kas/machine/Kconfig > +++ b/kas/machine/Kconfig > @@ -253,6 +253,13 @@ config MACHINE_HYPER_V > select CODENAME_TRIXIE > select ARCH_AMD64 > > +config MACHINE_WSL > + bool "wsl" > + select DISTRO_DEBIAN > + select CODENAME_BOOKWORM > + select CODENAME_TRIXIE > + select ARCH_AMD64 > + > config MACHINE_X86_PC > bool "x86 PC" > select DISTRO_DEBIAN > @@ -297,6 +304,7 @@ config KAS_INCLUDE_MACHINE > default "kas/machine/virtualbox.yaml" if MACHINE_VIRTUALBOX > default "kas/machine/vmware.yaml" if MACHINE_VMWARE > default "kas/machine/hyper-v-amd64.yaml" if MACHINE_HYPER_V > + default "kas/machine/wsl.yaml" if MACHINE_WSL > default "kas/machine/x86-pc.yaml" if MACHINE_X86_PC > > endmenu > diff --git a/kas/machine/wsl.yaml b/kas/machine/wsl.yaml > new file mode 100644 > index 00000000..f043b02a > --- /dev/null > +++ b/kas/machine/wsl.yaml > @@ -0,0 +1,7 @@ > +# This software is a part of Isar. > +# Copyright (c) Siemens AG, 2026 > + > +header: > + version: 14 > + > +machine: wsl > diff --git a/meta-isar/conf/machine/wsl.conf b/meta-isar/conf/machine/wsl.conf > new file mode 100644 > index 00000000..086b0fe1 > --- /dev/null > +++ b/meta-isar/conf/machine/wsl.conf > @@ -0,0 +1,16 @@ > +# This software is a part of Isar. > +# Copyright (C) Siemens AG, 2026 > +# > +# SPDX-License-Identifier: MIT > + > +DISTRO_ARCH ?= "amd64" > + > +# WSL uses the Windows-provided kernel > +KERNEL_NAME = "" We should probably don't set KERNEL_NAME at all, just like container machine does. And this also requires adding some hacks in meta-isar/conf/local.conf.sample > + > +IMAGE_FSTYPES ?= "wsl" > + > +# Configure rootfs for WSL boot > +IMAGE_INSTALL:append = " wsl-config" > +# Enable systemd-user session model > +IMAGE_PREINSTALL:append = " dbus dbus-user-session" > diff --git a/meta-isar/conf/mc.conf b/meta-isar/conf/mc.conf > index 649430a2..df3a38b0 100644 > --- a/meta-isar/conf/mc.conf > +++ b/meta-isar/conf/mc.conf > @@ -89,4 +89,6 @@ BBMULTICONFIG = " \ > qemuamd64-sid \ > qemuarm64-sid \ > qemuriscv64-resolute \ > + wsl-bookworm \ > + wsl-trixie \ > " Can you also run testsuite/targets_gen.py to update testsuite/data/targets.yml? > diff --git a/meta-isar/conf/multiconfig/wsl-bookworm.conf b/meta-isar/conf/multiconfig/wsl-bookworm.conf > new file mode 100644 > index 00000000..5e9f3697 > --- /dev/null > +++ b/meta-isar/conf/multiconfig/wsl-bookworm.conf > @@ -0,0 +1,7 @@ > +# This software is a part of Isar. > +# Copyright (C) Siemens AG, 2026 > +# > +# SPDX-License-Identifier: MIT > + > +MACHINE ?= "wsl" > +DISTRO ?= "debian-bookworm" > diff --git a/meta-isar/conf/multiconfig/wsl-trixie.conf b/meta-isar/conf/multiconfig/wsl-trixie.conf > new file mode 100644 > index 00000000..8ef796e4 > --- /dev/null > +++ b/meta-isar/conf/multiconfig/wsl-trixie.conf > @@ -0,0 +1,7 @@ > +# This software is a part of Isar. > +# Copyright (C) Siemens AG, 2026 > +# > +# SPDX-License-Identifier: MIT > + > +MACHINE ?= "wsl" > +DISTRO ?= "debian-trixie" > diff --git a/meta/classes-recipe/image.bbclass b/meta/classes-recipe/image.bbclass > index d02f99da..0329c3f8 100644 > --- a/meta/classes-recipe/image.bbclass > +++ b/meta/classes-recipe/image.bbclass > @@ -174,7 +174,7 @@ IMAGE_BASETYPES = "${@get_image_basetypes(d)}" > > # image types > IMAGE_CLASSES ??= "" > -IMGCLASSES = "imagetypes imagetypes_wic imagetypes_vm imagetypes_container squashfs \ > +IMGCLASSES = "imagetypes imagetypes_wic imagetypes_vm imagetypes_wsl imagetypes_container squashfs \ > imagetypes_ddi" > IMGCLASSES += "${IMAGE_CLASSES}" > inherit ${IMGCLASSES} > diff --git a/meta/classes-recipe/imagetypes_wsl.bbclass b/meta/classes-recipe/imagetypes_wsl.bbclass > new file mode 100644 > index 00000000..413c6a2d > --- /dev/null > +++ b/meta/classes-recipe/imagetypes_wsl.bbclass > @@ -0,0 +1,48 @@ > +# This software is a part of Isar. > +# Copyright (C) Siemens AG, 2026 > +# > +# SPDX-License-Identifier: MIT > + > +# This class allows to generate WSL import artifacts. > +# > + > +USING_WSL = "${@bb.utils.contains('IMAGE_BASETYPES', 'wsl', '1', '0', d)}" > + > +# WSL requires a static /dev/pts/ptmx during early boot > +ROOTFS_CONFIGURE_COMMAND += "${@bb.utils.contains('USING_WSL', '1', 'image_configure_wsl_ptmx', '', d)}" > + > +# The rootfs should not contain a /etc/resolv.conf > +# See https://learn.microsoft.com/en-us/windows/wsl/build-custom-distro#configuration-file-recommendations > +ROOTFS_POSTPROCESS_COMMAND += "${@bb.utils.contains('USING_WSL', '1', 'image_postprocess_wsl_cleanup', '', d)}" > +image_postprocess_wsl_cleanup[vardeps] += "WSL_CLEANUP_FILES" > + > +WSL_CLEANUP_FILES ?= " \ > + /etc/resolv.conf \ > +" > + > +IMAGE_TYPEDEP:wsl = "tar.gz" > + > +IMAGE_CMD:wsl() { > + cp -f "${DEPLOY_DIR_IMAGE}/${IMAGE_FULLNAME}.tar.gz" "${IMAGE_FILE_HOST}" > +} > + > +image_configure_wsl_ptmx() { > + run_privileged_heredoc <<'EOSUDO' > + set -e > + > + mkdir -p "${ROOTFSDIR}/dev/pts" > + if [ ! -e "${ROOTFSDIR}/dev/pts/ptmx" ]; then > + mknod -m 000 "${ROOTFSDIR}/dev/pts/ptmx" c 5 2 > + fi > +EOSUDO > +} > + > +image_postprocess_wsl_cleanup() { > + run_privileged_heredoc <<'EOSUDO' > + set -e > + > + for path in ${WSL_CLEANUP_FILES}; do > + rm -f "${ROOTFSDIR}${path}" > + done > +EOSUDO > +} > diff --git a/meta/recipes-support/wsl-config/files/etc/oobe.sh b/meta/recipes-support/wsl-config/files/etc/oobe.sh > new file mode 100644 > index 00000000..e9ddfd16 > --- /dev/null > +++ b/meta/recipes-support/wsl-config/files/etc/oobe.sh > @@ -0,0 +1,4 @@ > +#! /usr/bin/bash > + > +# Generic OOBE hook for Isar-generated WSL images > +exit 0 > diff --git a/meta/recipes-support/wsl-config/files/etc/wsl-distribution.conf.tmpl b/meta/recipes-support/wsl-config/files/etc/wsl-distribution.conf.tmpl > new file mode 100644 > index 00000000..4f83314b > --- /dev/null > +++ b/meta/recipes-support/wsl-config/files/etc/wsl-distribution.conf.tmpl > @@ -0,0 +1,6 @@ > +# See https://learn.microsoft.com/en-us/windows/wsl/build-custom-distro#add-the-wsl-distribution-configuration-file > + > +[oobe] > +command = /etc/oobe.sh > +defaultUid = ${WSL_DEFAULT_UID} > +defaultName = ${WSL_DEFAULT_NAME} > diff --git a/meta/recipes-support/wsl-config/files/etc/wsl.conf.tmpl b/meta/recipes-support/wsl-config/files/etc/wsl.conf.tmpl > new file mode 100644 > index 00000000..862ca252 > --- /dev/null > +++ b/meta/recipes-support/wsl-config/files/etc/wsl.conf.tmpl > @@ -0,0 +1,5 @@ > +[boot] > +systemd=true > + > +[user] > +default=${WSL_DEFAULT_USER} > diff --git a/meta/recipes-support/wsl-config/wsl-config_0.1.bb b/meta/recipes-support/wsl-config/wsl-config_0.1.bb > new file mode 100644 > index 00000000..2144c01b > --- /dev/null > +++ b/meta/recipes-support/wsl-config/wsl-config_0.1.bb > @@ -0,0 +1,37 @@ > +# This software is a part of Isar. > +# Copyright (C) Siemens AG, 2026 > +# > +# SPDX-License-Identifier: MIT > + > +inherit dpkg-raw > + > +DESCRIPTION = "WSL configuration files" > +MAINTAINER = "Clara Kowalsky <clara.kowalsky@siemens.com>" > + > +WSL_DEFAULT_USER ?= "root" > +WSL_DEFAULT_UID ?= "0" > +WSL_DEFAULT_NAME ?= "${DISTRO}-${MACHINE}" > + > +SRC_URI = " \ > + file://etc/oobe.sh \ > + file://etc/wsl.conf.tmpl \ > + file://etc/wsl-distribution.conf.tmpl \ > +" > + > +TEMPLATE_FILES = " \ > + etc/wsl.conf.tmpl \ > + etc/wsl-distribution.conf.tmpl \ > +" > +TEMPLATE_VARS += " \ > + WSL_DEFAULT_USER \ > + WSL_DEFAULT_UID \ > + WSL_DEFAULT_NAME \ > +" > + > +do_install[cleandirs] += "${D}/etc" > + > +do_install() { > + install -m 0644 "${WORKDIR}/etc/wsl.conf" "${D}/etc" > + install -m 0644 "${WORKDIR}/etc/wsl-distribution.conf" "${D}/etc" > + install -m 0755 "${WORKDIR}/etc/oobe.sh" "${D}/etc" > +} > diff --git a/testsuite/citest.py b/testsuite/citest.py > index a4f15d04..b13e27ed 100644 > --- a/testsuite/citest.py > +++ b/testsuite/citest.py > @@ -904,6 +904,8 @@ class NoCrossTest(CIBaseTest): > 'mc:qemuamd64-jammy:isar-image-base', > 'mc:qemuarm64-jammy:isar-image-base', > 'mc:x86-pc-bookworm:isar-image-base', > + 'mc:wsl-bookworm:isar-image-base', > + 'mc:wsl-trixie:isar-image-base', It's better to add a separate test case (just like for containers). > ] > > self.init() -- You received this message because you are subscribed to the Google Groups "isar-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/isar-users/925c03a1-c68d-42e6-9587-5a4afb513b93%40ilbers.de. ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH] meta: Generate WSL image for Windows Subsystem for Linux 2026-08-10 10:37 ` Anton Mikanovich @ 2026-08-12 9:59 ` 'Clara Kowalsky' via isar-users 0 siblings, 0 replies; 5+ messages in thread From: 'Clara Kowalsky' via isar-users @ 2026-08-12 9:59 UTC (permalink / raw) To: Anton Mikanovich, isar-users; +Cc: florian.bezdeka On 8/10/26 12:37, Anton Mikanovich wrote: > 06.08.2026 10:07, 'Clara Kowalsky' via isar-users wrote: >> This allows to generate a wsl file for Windows Subsystem for Linux. >> The wsl image class adapts the rootfs for WSL: It creates /dev/pts/ptmx >> because WSL needs that node before devpts is mounted. Without it, early >> boot fails with forkpty errors. The class also removes /etc/resolv.conf, >> as WSL manages it itself. >> See https://eur01.safelinks.protection.outlook.com/? >> url=https%3A%2F%2Flearn.microsoft.com%2Fen-us%2Fwindows%2Fwsl%2Fbuild- >> custom-distro%23configuration-file- >> recommendations&data=05%7C02%7Cclara.kowalsky%40siemens.com%7Cee27eaa6dc0e4d5563a308def6cb681c%7C38ae3bcd95794fd4addab42e1495d55a%7C1%7C0%7C639219550679870389%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=5vhCDx7w5JEvg268M8TauaG%2FHWvD1p4QnkOOJZOtMvA%3D&reserved=0 >> >> The wsl-config recipe ships the configuration files /etc/wsl.conf and >> /etc/wsl-distribution.conf as templates. >> See https://eur01.safelinks.protection.outlook.com/? >> url=https%3A%2F%2Flearn.microsoft.com%2Fen-us%2Fwindows%2Fwsl%2Fbuild- >> custom-distro%23create-wsl-configuration- >> files&data=05%7C02%7Cclara.kowalsky%40siemens.com%7Cee27eaa6dc0e4d5563a308def6cb681c%7C38ae3bcd95794fd4addab42e1495d55a%7C1%7C0%7C639219550679887567%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=ivPY0EFuef7WVQHUxvTPOCVRDmAiB7m3D3mT157OrhY%3D&reserved=0 >> >> The variables in the configuration files can be overwritten in >> downstream layers: >> - WSL_DEFAULT_USER specifies which user runs when the WSL distro is >> launched. Default: "root" >> - WSL_DEFAULT_UID specifies the default UID used during first-run/OOBE >> installation. Default: "0" >> - WSL_DEFAULT_NAME specifies the name that the distro is registered >> under. Default: "${DISTRO}-${MACHINE}" >> Whole configuration files can be replaced or added by bbappending the >> wsl-config recipe. >> >> This was tested with WSL2, in plain Isar and in downstream layer. >> >> Signed-off-by: Clara Kowalsky <clara.kowalsky@siemens.com> >> --- >> doc/user_manual.md | 1 + >> kas/machine/Kconfig | 8 ++++ >> kas/machine/wsl.yaml | 7 +++ >> meta-isar/conf/machine/wsl.conf | 16 +++++++ >> meta-isar/conf/mc.conf | 2 + >> meta-isar/conf/multiconfig/wsl-bookworm.conf | 7 +++ >> meta-isar/conf/multiconfig/wsl-trixie.conf | 7 +++ >> meta/classes-recipe/image.bbclass | 2 +- >> meta/classes-recipe/imagetypes_wsl.bbclass | 48 +++++++++++++++++++ >> .../wsl-config/files/etc/oobe.sh | 4 ++ >> .../files/etc/wsl-distribution.conf.tmpl | 6 +++ >> .../wsl-config/files/etc/wsl.conf.tmpl | 5 ++ >> .../wsl-config/wsl-config_0.1.bb | 37 ++++++++++++++ >> testsuite/citest.py | 2 + >> 14 files changed, 151 insertions(+), 1 deletion(-) >> create mode 100644 kas/machine/wsl.yaml >> create mode 100644 meta-isar/conf/machine/wsl.conf >> create mode 100644 meta-isar/conf/multiconfig/wsl-bookworm.conf >> create mode 100644 meta-isar/conf/multiconfig/wsl-trixie.conf >> create mode 100644 meta/classes-recipe/imagetypes_wsl.bbclass >> create mode 100644 meta/recipes-support/wsl-config/files/etc/oobe.sh >> create mode 100644 meta/recipes-support/wsl-config/files/etc/wsl- >> distribution.conf.tmpl >> create mode 100644 meta/recipes-support/wsl-config/files/etc/ >> wsl.conf.tmpl >> create mode 100644 meta/recipes-support/wsl-config/wsl-config_0.1.bb >> >> diff --git a/doc/user_manual.md b/doc/user_manual.md >> index dcc3f560..f3b1acb9 100644 >> --- a/doc/user_manual.md >> +++ b/doc/user_manual.md >> @@ -514,6 +514,7 @@ Currently, the following image types are provided: >> - `ubi` - image for use on mtd nand partitions employing UBI >> - `ubifs` - raw UBI filesystem image, normally used together with >> UBI partitions >> - `ova` - Open Virtual Appliance: image for use on VirtualBox or >> VMware >> + - `wsl` - tar file for Windows Subsystem for Linux >> - `squashfs` - raw squashfs filesystem image >> - `fit` - FIT image as used by U-Boot >> - `oci-archive`, `docker-archive`, `docker-daemon`, `containers- >> storage` - see [generating container images](#generate-container- >> image-with-root-filesystem) >> diff --git a/kas/machine/Kconfig b/kas/machine/Kconfig >> index 1e360be6..2895368c 100644 >> --- a/kas/machine/Kconfig >> +++ b/kas/machine/Kconfig >> @@ -253,6 +253,13 @@ config MACHINE_HYPER_V >> select CODENAME_TRIXIE >> select ARCH_AMD64 >> +config MACHINE_WSL >> + bool "wsl" >> + select DISTRO_DEBIAN >> + select CODENAME_BOOKWORM >> + select CODENAME_TRIXIE >> + select ARCH_AMD64 >> + >> config MACHINE_X86_PC >> bool "x86 PC" >> select DISTRO_DEBIAN >> @@ -297,6 +304,7 @@ config KAS_INCLUDE_MACHINE >> default "kas/machine/virtualbox.yaml" if MACHINE_VIRTUALBOX >> default "kas/machine/vmware.yaml" if MACHINE_VMWARE >> default "kas/machine/hyper-v-amd64.yaml" if MACHINE_HYPER_V >> + default "kas/machine/wsl.yaml" if MACHINE_WSL >> default "kas/machine/x86-pc.yaml" if MACHINE_X86_PC >> endmenu >> diff --git a/kas/machine/wsl.yaml b/kas/machine/wsl.yaml >> new file mode 100644 >> index 00000000..f043b02a >> --- /dev/null >> +++ b/kas/machine/wsl.yaml >> @@ -0,0 +1,7 @@ >> +# This software is a part of Isar. >> +# Copyright (c) Siemens AG, 2026 >> + >> +header: >> + version: 14 >> + >> +machine: wsl >> diff --git a/meta-isar/conf/machine/wsl.conf b/meta-isar/conf/machine/ >> wsl.conf >> new file mode 100644 >> index 00000000..086b0fe1 >> --- /dev/null >> +++ b/meta-isar/conf/machine/wsl.conf >> @@ -0,0 +1,16 @@ >> +# This software is a part of Isar. >> +# Copyright (C) Siemens AG, 2026 >> +# >> +# SPDX-License-Identifier: MIT >> + >> +DISTRO_ARCH ?= "amd64" >> + >> +# WSL uses the Windows-provided kernel >> +KERNEL_NAME = "" > We should probably don't set KERNEL_NAME at all, just like container > machine does. > And this also requires adding some hacks in meta-isar/conf/ > local.conf.sample I'll send a v2 with KERNEL_NAME removed and "hacks" in local.conf.sample. I only set the KERNEL_NAME to empty in v1, as it gets overridden by default when using isar-cip-core. >> + >> +IMAGE_FSTYPES ?= "wsl" >> + >> +# Configure rootfs for WSL boot >> +IMAGE_INSTALL:append = " wsl-config" >> +# Enable systemd-user session model >> +IMAGE_PREINSTALL:append = " dbus dbus-user-session" >> diff --git a/meta-isar/conf/mc.conf b/meta-isar/conf/mc.conf >> index 649430a2..df3a38b0 100644 >> --- a/meta-isar/conf/mc.conf >> +++ b/meta-isar/conf/mc.conf >> @@ -89,4 +89,6 @@ BBMULTICONFIG = " \ >> qemuamd64-sid \ >> qemuarm64-sid \ >> qemuriscv64-resolute \ >> + wsl-bookworm \ >> + wsl-trixie \ >> " > Can you also run testsuite/targets_gen.py to update testsuite/data/ > targets.yml? Done in v2. >> diff --git a/meta-isar/conf/multiconfig/wsl-bookworm.conf b/meta-isar/ >> conf/multiconfig/wsl-bookworm.conf >> new file mode 100644 >> index 00000000..5e9f3697 >> --- /dev/null >> +++ b/meta-isar/conf/multiconfig/wsl-bookworm.conf >> @@ -0,0 +1,7 @@ >> +# This software is a part of Isar. >> +# Copyright (C) Siemens AG, 2026 >> +# >> +# SPDX-License-Identifier: MIT >> + >> +MACHINE ?= "wsl" >> +DISTRO ?= "debian-bookworm" >> diff --git a/meta-isar/conf/multiconfig/wsl-trixie.conf b/meta-isar/ >> conf/multiconfig/wsl-trixie.conf >> new file mode 100644 >> index 00000000..8ef796e4 >> --- /dev/null >> +++ b/meta-isar/conf/multiconfig/wsl-trixie.conf >> @@ -0,0 +1,7 @@ >> +# This software is a part of Isar. >> +# Copyright (C) Siemens AG, 2026 >> +# >> +# SPDX-License-Identifier: MIT >> + >> +MACHINE ?= "wsl" >> +DISTRO ?= "debian-trixie" >> diff --git a/meta/classes-recipe/image.bbclass b/meta/classes-recipe/ >> image.bbclass >> index d02f99da..0329c3f8 100644 >> --- a/meta/classes-recipe/image.bbclass >> +++ b/meta/classes-recipe/image.bbclass >> @@ -174,7 +174,7 @@ IMAGE_BASETYPES = "${@get_image_basetypes(d)}" >> # image types >> IMAGE_CLASSES ??= "" >> -IMGCLASSES = "imagetypes imagetypes_wic imagetypes_vm >> imagetypes_container squashfs \ >> +IMGCLASSES = "imagetypes imagetypes_wic imagetypes_vm imagetypes_wsl >> imagetypes_container squashfs \ >> imagetypes_ddi" >> IMGCLASSES += "${IMAGE_CLASSES}" >> inherit ${IMGCLASSES} >> diff --git a/meta/classes-recipe/imagetypes_wsl.bbclass b/meta/ >> classes-recipe/imagetypes_wsl.bbclass >> new file mode 100644 >> index 00000000..413c6a2d >> --- /dev/null >> +++ b/meta/classes-recipe/imagetypes_wsl.bbclass >> @@ -0,0 +1,48 @@ >> +# This software is a part of Isar. >> +# Copyright (C) Siemens AG, 2026 >> +# >> +# SPDX-License-Identifier: MIT >> + >> +# This class allows to generate WSL import artifacts. >> +# >> + >> +USING_WSL = "${@bb.utils.contains('IMAGE_BASETYPES', 'wsl', '1', '0', >> d)}" >> + >> +# WSL requires a static /dev/pts/ptmx during early boot >> +ROOTFS_CONFIGURE_COMMAND += "${@bb.utils.contains('USING_WSL', '1', >> 'image_configure_wsl_ptmx', '', d)}" >> + >> +# The rootfs should not contain a /etc/resolv.conf >> +# See https://eur01.safelinks.protection.outlook.com/? >> url=https%3A%2F%2Flearn.microsoft.com%2Fen-us%2Fwindows%2Fwsl%2Fbuild- >> custom-distro%23configuration-file- >> recommendations&data=05%7C02%7Cclara.kowalsky%40siemens.com%7Cee27eaa6dc0e4d5563a308def6cb681c%7C38ae3bcd95794fd4addab42e1495d55a%7C1%7C0%7C639219550679897282%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=ODd2QDlUQV0xHGNOedKXG9NQsbDYpTAh8HUlkLkqyv8%3D&reserved=0 >> +ROOTFS_POSTPROCESS_COMMAND += "${@bb.utils.contains('USING_WSL', '1', >> 'image_postprocess_wsl_cleanup', '', d)}" >> +image_postprocess_wsl_cleanup[vardeps] += "WSL_CLEANUP_FILES" >> + >> +WSL_CLEANUP_FILES ?= " \ >> + /etc/resolv.conf \ >> +" >> + >> +IMAGE_TYPEDEP:wsl = "tar.gz" >> + >> +IMAGE_CMD:wsl() { >> + cp -f "${DEPLOY_DIR_IMAGE}/${IMAGE_FULLNAME}.tar.gz" >> "${IMAGE_FILE_HOST}" >> +} >> + >> +image_configure_wsl_ptmx() { >> + run_privileged_heredoc <<'EOSUDO' >> + set -e >> + >> + mkdir -p "${ROOTFSDIR}/dev/pts" >> + if [ ! -e "${ROOTFSDIR}/dev/pts/ptmx" ]; then >> + mknod -m 000 "${ROOTFSDIR}/dev/pts/ptmx" c 5 2 >> + fi >> +EOSUDO >> +} >> + >> +image_postprocess_wsl_cleanup() { >> + run_privileged_heredoc <<'EOSUDO' >> + set -e >> + >> + for path in ${WSL_CLEANUP_FILES}; do >> + rm -f "${ROOTFSDIR}${path}" >> + done >> +EOSUDO >> +} >> diff --git a/meta/recipes-support/wsl-config/files/etc/oobe.sh b/meta/ >> recipes-support/wsl-config/files/etc/oobe.sh >> new file mode 100644 >> index 00000000..e9ddfd16 >> --- /dev/null >> +++ b/meta/recipes-support/wsl-config/files/etc/oobe.sh >> @@ -0,0 +1,4 @@ >> +#! /usr/bin/bash >> + >> +# Generic OOBE hook for Isar-generated WSL images >> +exit 0 >> diff --git a/meta/recipes-support/wsl-config/files/etc/wsl- >> distribution.conf.tmpl b/meta/recipes-support/wsl-config/files/etc/ >> wsl-distribution.conf.tmpl >> new file mode 100644 >> index 00000000..4f83314b >> --- /dev/null >> +++ b/meta/recipes-support/wsl-config/files/etc/wsl- >> distribution.conf.tmpl >> @@ -0,0 +1,6 @@ >> +# See https://eur01.safelinks.protection.outlook.com/? >> url=https%3A%2F%2Flearn.microsoft.com%2Fen-us%2Fwindows%2Fwsl%2Fbuild- >> custom-distro%23add-the-wsl-distribution-configuration- >> file&data=05%7C02%7Cclara.kowalsky%40siemens.com%7Cee27eaa6dc0e4d5563a308def6cb681c%7C38ae3bcd95794fd4addab42e1495d55a%7C1%7C0%7C639219550679906625%7CUnknown%7CTWFpbGZsb3d8eyJFbXB0eU1hcGkiOnRydWUsIlYiOiIwLjAuMDAwMCIsIlAiOiJXaW4zMiIsIkFOIjoiTWFpbCIsIldUIjoyfQ%3D%3D%7C0%7C%7C%7C&sdata=5syCP2hLknjgdDijfCEBLcqZS3ZUpe7Pqk1qzFdOklA%3D&reserved=0 >> + >> +[oobe] >> +command = /etc/oobe.sh >> +defaultUid = ${WSL_DEFAULT_UID} >> +defaultName = ${WSL_DEFAULT_NAME} >> diff --git a/meta/recipes-support/wsl-config/files/etc/wsl.conf.tmpl >> b/meta/recipes-support/wsl-config/files/etc/wsl.conf.tmpl >> new file mode 100644 >> index 00000000..862ca252 >> --- /dev/null >> +++ b/meta/recipes-support/wsl-config/files/etc/wsl.conf.tmpl >> @@ -0,0 +1,5 @@ >> +[boot] >> +systemd=true >> + >> +[user] >> +default=${WSL_DEFAULT_USER} >> diff --git a/meta/recipes-support/wsl-config/wsl-config_0.1.bb b/meta/ >> recipes-support/wsl-config/wsl-config_0.1.bb >> new file mode 100644 >> index 00000000..2144c01b >> --- /dev/null >> +++ b/meta/recipes-support/wsl-config/wsl-config_0.1.bb >> @@ -0,0 +1,37 @@ >> +# This software is a part of Isar. >> +# Copyright (C) Siemens AG, 2026 >> +# >> +# SPDX-License-Identifier: MIT >> + >> +inherit dpkg-raw >> + >> +DESCRIPTION = "WSL configuration files" >> +MAINTAINER = "Clara Kowalsky <clara.kowalsky@siemens.com>" >> + >> +WSL_DEFAULT_USER ?= "root" >> +WSL_DEFAULT_UID ?= "0" >> +WSL_DEFAULT_NAME ?= "${DISTRO}-${MACHINE}" >> + >> +SRC_URI = " \ >> + file://etc/oobe.sh \ >> + file://etc/wsl.conf.tmpl \ >> + file://etc/wsl-distribution.conf.tmpl \ >> +" >> + >> +TEMPLATE_FILES = " \ >> + etc/wsl.conf.tmpl \ >> + etc/wsl-distribution.conf.tmpl \ >> +" >> +TEMPLATE_VARS += " \ >> + WSL_DEFAULT_USER \ >> + WSL_DEFAULT_UID \ >> + WSL_DEFAULT_NAME \ >> +" >> + >> +do_install[cleandirs] += "${D}/etc" >> + >> +do_install() { >> + install -m 0644 "${WORKDIR}/etc/wsl.conf" "${D}/etc" >> + install -m 0644 "${WORKDIR}/etc/wsl-distribution.conf" "${D}/etc" >> + install -m 0755 "${WORKDIR}/etc/oobe.sh" "${D}/etc" >> +} >> diff --git a/testsuite/citest.py b/testsuite/citest.py >> index a4f15d04..b13e27ed 100644 >> --- a/testsuite/citest.py >> +++ b/testsuite/citest.py >> @@ -904,6 +904,8 @@ class NoCrossTest(CIBaseTest): >> 'mc:qemuamd64-jammy:isar-image-base', >> 'mc:qemuarm64-jammy:isar-image-base', >> 'mc:x86-pc-bookworm:isar-image-base', >> + 'mc:wsl-bookworm:isar-image-base', >> + 'mc:wsl-trixie:isar-image-base', > It's better to add a separate test case (just like for containers). Done in v2. >> ] >> self.init() > -- You received this message because you are subscribed to the Google Groups "isar-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to isar-users+unsubscribe@googlegroups.com. To view this discussion visit https://groups.google.com/d/msgid/isar-users/2ad22b5c-4239-4572-8a00-85bf483fd448%40siemens.com. ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2026-08-12 9:59 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2026-08-06 7:07 [PATCH] meta: Generate WSL image for Windows Subsystem for Linux 'Clara Kowalsky' via isar-users 2026-08-06 7:49 ` 'MOESSBAUER, Felix' via isar-users 2026-08-12 9:26 ` 'Clara Kowalsky' via isar-users 2026-08-10 10:37 ` Anton Mikanovich 2026-08-12 9:59 ` 'Clara Kowalsky' via isar-users
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox